| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid WARNING in sva unbind path
The Intel IOMMU driver allows SVA on devices even if they do not support
PCI/PRI. Commit 39c20c4e83b9 ("iommu/vt-d: Only handle IOPF for SVA when
PRI is supported") modified the SVA bind path to allow this configuration
by skipping IOPF enablement when PRI is missing. However, it failed to
update the unbind path.
This creates an imbalance: the unbind path attempts to disable IOPF for
a device that never had it enabled, triggering a WARNING in
intel_iommu_disable_iopf():
WARNING: drivers/iommu/intel/iommu.c:3475 at intel_iommu_disable_iopf+0x4f/0x90d
Call Trace:
<TASK>
blocking_domain_set_dev_pasid+0x50/0x70
iommu_detach_device_pasid+0x89/0xc0
iommu_sva_unbind_device+0x73/0x150
xe_vm_close_and_put+0x4d2/0x1200 [xe]
Fix this by bypassing IOPF operations for SVA domains on non-PRI hardware
in both the bind and unbind paths. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning
When CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRM
driver (e.g. amdgpu for video playback in GNOME Videos / Showtime)
triggers a spurious warning:
DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \
overlapping mappings aren't supported
WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0
The call chain is:
amdgpu_cs_ioctl
-> amdgpu_ttm_backend_bind
-> dma_buf_map_attachment
-> [udmabuf] map_udmabuf -> get_sg_table
-> dma_map_sgtable(dev, sg, direction, 0) // attrs=0
-> debug_dma_map_sg -> add_dma_entry -> EEXIST
This happens because udmabuf builds a per-page scatter-gather list via
sg_set_folio(). When begin_cpu_udmabuf() has already created an sg
table mapped for the misc device, and an importer such as amdgpu maps
the same pages for its own device via map_udmabuf(), the DMA debug
infrastructure sees two active mappings whose physical addresses share
cacheline boundaries and warns about the overlap.
The DMA_ATTR_SKIP_CPU_SYNC flag suppresses this check in
add_dma_entry() because it signals that no CPU cache maintenance is
performed at map/unmap time, making the cacheline overlap harmless.
All other major dma-buf exporters already pass this flag:
- drm_gem_map_dma_buf() passes DMA_ATTR_SKIP_CPU_SYNC
- amdgpu_dma_buf_map() passes DMA_ATTR_SKIP_CPU_SYNC
The CPU sync at map/unmap time is also redundant for udmabuf:
begin_cpu_udmabuf() and end_cpu_udmabuf() already perform explicit
cache synchronization via dma_sync_sgtable_for_cpu/device() when CPU
access is requested through the dma-buf interface.
Pass DMA_ATTR_SKIP_CPU_SYNC to dma_map_sgtable() and
dma_unmap_sgtable() in udmabuf to suppress the spurious warning and
skip the redundant sync. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix NULL-deref on adapter registration failure
If adapter registration ever fails the release callback would trigger a
NULL-pointer dereference as the completion struct has not been
initialised.
Note that before the offending commit this would instead have resulted
in a minor memory leak of the adapter name. |
| Erroneously reserved under wrong year by automation defect; never assigned. |
| Erroneously reserved under wrong year by automation defect; never assigned. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: arc: emac: quiesce interrupts before requesting IRQ
Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe
should not see interrupt delivery in the usual case. However, hardware may
still present stale or latched interrupt status left by firmware or the
bootloader.
If probe later unwinds after devm_request_irq() has installed the handler,
such a stale interrupt can still reach arc_emac_intr() during teardown and
race with release of the associated net_device.
Avoid that window by putting the device into a known quiescent state before
requesting the IRQ: disable all EMAC interrupt sources and clear any
pending EMAC interrupt status bits. This keeps the change hardware-focused
and minimal, while preventing spurious IRQ delivery from leftover state. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: drain bus_reset work on device removal
brcmf_fw_crashed() and the debugfs "reset" entry both schedule
drvr->bus_reset, whose callback recovers drvr through container_of()
and dereferences it. The removal path frees drvr (brcmf_free ->
wiphy_free) without draining the work, so a bus_reset callback pending
or running during removal can outlive drvr.
Cancellation cannot live in brcmf_detach() or brcmf_free(): the work
callback reaches teardown through the bus .reset op (PCIe
brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset ->
brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for
the running work and deadlock.
Add a per-bus mutex (bus_reset_lock) and route all arming through
brcmf_bus_schedule_reset(), which under the lock skips when the bus is
marked removing. Each bus remove entry calls
brcmf_bus_cancel_reset_work(), which under the same lock sets removing
and cancels the work. Holding the mutex across cancel_work_sync() makes
the set-removing + drain step atomic. Every producer reaches the arming
path from process context -- the PCIe firmware-halt notification runs in
the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail
path runs from the data workqueue -- so the mutex is taken only in
sleepable contexts. Where applicable the remove entry first stops the
firmware-crash producer: on PCIe mask the mailbox and synchronize_irq;
on SDIO unregister the bus interrupt and cancel the data worker, which
also reports firmware halts through brcmf_fw_crashed(). The mutex is
initialized at bus allocation. The SDIO suspend power-off path frees
drvr through the same brcmf_sdiod_remove() and takes the same lock;
resume re-allows the work only on a successful re-probe.
Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire
before brcmf_attach() wires up drvr, and it dereferences drvr
(bphy_err/brcmf_dev_coredump) before reaching the arming gate.
The bus_reset work is shared across buses, so the drain is applied to
every remove path: PCIe (the .reset op introduced by the Fixes commit),
SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the
debugfs "reset" entry). cancel_work_sync() drains a running or pending
bus_reset work item before removal frees drvr, and patch 1/2 makes the
scratch-buffer release safe when reset teardown has already released
those DMA buffers.
This patch fixes the lifetime of the bus_reset work item itself. It does
not attempt to address the separate, pre-existing lifetime of the
asynchronous firmware completion started by the PCIe reset path. That
callback needs its own lifetime/ownership protocol and is being tracked
separately.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_midi: cancel pending IN work before freeing the midi object
The f_midi driver embeds a work item (midi->work) whose handler,
f_midi_in_work(), dereferences the enclosing struct f_midi through
container_of(). This work is armed from two sites: f_midi_complete(),
on a normal IN-endpoint completion, and f_midi_in_trigger(), on an ALSA
rawmidi output-stream start.
Neither f_midi_disable() nor f_midi_unbind() cancels midi->work.
f_midi_disable() only disables the endpoints and drains the in_req_fifo;
it does not synchronize the work item, and the sound card is released
asynchronously to the final free of the midi object.
The midi object is reference-counted (midi->free_ref) and is freed in
f_midi_free() only once both the usb_function reference and the rawmidi
private_data reference have been dropped. In f_midi_unbind(),
f_midi_disable() runs before the sound card is released, so while the
USB endpoints are already disabled the rawmidi device is still usable by
an open substream. A concurrent userspace write on such a substream can
reach f_midi_in_trigger() and queue midi->work again after
f_midi_disable() has returned. A work item armed this way may still be
pending when the last reference drops and f_midi_free() proceeds to
kfree(midi), letting f_midi_in_work() dereference the struct after it
has been freed, a use-after-free.
For this reason cancelling midi->work in f_midi_disable() would not be
sufficient: the ALSA trigger path can rearm the work after disable()
returns. Cancelling at the refcount-zero free site is the boundary
after which neither arming source can survive, because by then both
references that keep the midi object alive have been dropped: the USB
endpoints are already disabled and the rawmidi device has been released.
Fix this by calling cancel_work_sync(&midi->work) in the refcount-zero
block of f_midi_free(), before the embedded work_struct is freed along
with the rest of the structure. opts->lock is a sleeping mutex, so
calling cancel_work_sync() under it is permitted, and the handler takes
midi->transmit_lock rather than opts->lock, so no self-deadlock can
occur while it waits for a running instance of the work to finish.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown
The Broadcom BDC UDC driver registers its IRQ handler with
devm_request_irq() in bdc_udc_init(), so the IRQ is released by devm
only after bdc_remove() returns. devm releases resources in reverse
LIFO order, but bdc_remove() runs bdc_udc_exit() and bdc_hw_exit() ->
bdc_mem_free() manually before returning: bdc_udc_exit() tears down
individual endpoint objects via bdc_free_ep(), while bdc_hw_exit() ->
bdc_mem_free() frees and NULLs the DMA-coherent status-report ring
(bdc->srr.sr_bds) and kfree()s bdc->bdc_ep_array. Both happen while
the IRQ handler (bdc_udc_interrupt, requested with IRQF_SHARED)
remains deliverable in the window up to the post-remove devm
free_irq().
On receipt of a shared interrupt in that window, bdc_udc_interrupt()
dereferences bdc->srr.sr_bds[bdc->srr.dqp_index] (NULL or freed DMA)
and dispatches sr_handler callbacks that index into bdc_ep_array,
causing a NULL-deref or use-after-free.
The same window affects the delayed_work bdc->func_wake_notify, which is
armed from the IRQ handler via bdc_sr_uspc() -> handle_link_state_change()
-> schedule_delayed_work() and may self-rearm from its own callback
bdc_func_wake_timer(). No cancel exists anywhere in the driver, so a
queued work item that fires after bdc_remove() returns and the bdc
structure is devm-freed dereferences freed memory.
Replace devm_request_irq() with request_irq() and add an explicit
free_irq(bdc->irq, bdc) in bdc_remove(). Clear BDC_GIE before
free_irq() to stop the device from asserting interrupts, then
free_irq() drains any in-flight handler, then cancel_delayed_work_sync()
drains the func_wake_notify delayed work. This ordering ensures the
IRQ handler and delayed work cannot interfere with the subsequent
endpoint and DMA teardown in bdc_udc_exit() and bdc_hw_exit(). Wire the
matching free_irq() into the bdc_udc_init() error path so the IRQ is
released on probe failure, and route the bdc_init_ep() failure through
err0 instead of returning directly.
This issue was found by an in-house static analysis tool. |
| Erroneously reserved under wrong year by automation defect; never assigned. |
| A security vulnerability has been detected in TinyAGI 0.0.20. Impacted is the function processMessage of the file packages/main/src/index.ts of the component Message API Endpoint. Such manipulation leads to missing authorization. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw was found in the GStreamer gst-plugins-good package. The rtph264depay and rtph265depay RTP depayloader elements do not enforce a maximum size limit on the reassembly buffer used during fragmented RTP packet processing. A remote, unauthenticated attacker can send a continuous stream of RTP fragments without ever transmitting an end-of-fragment marker, causing the reassembly buffer to grow without bound until process memory is exhausted. This results in a denial of service through process termination. |
| A weakness has been identified in TinyAGI 0.0.20. This issue affects the function collectFiles of the file packages/core/src/response.ts of the component Message API Endpoint. This manipulation causes file inclusion. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in mf-yang openclaw-cn up to 0.2.1. This issue affects the function assertNoSymlinkEscape of the file src/agents/sandbox-paths.ts of the component apply_patch Tool. Such manipulation leads to link following. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in mf-yang openclaw-cn up to 0.2.1. This vulnerability affects the function isApprovedElevatedSender of the file src/auto-reply/reply/reply-elevated.ts. This manipulation causes improper privilege management. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| The Google Authenticator WordPress plugin before 0.56 does not verify a CSRF nonce when saving its two-factor setup, allowing attackers to trick a logged-in user into overwriting their own 2FA secret with an attacker-controlled value, which enables two-factor authentication and locks the victim out of their account. |
| The WPCargo Track & Trace WordPress plugin before 8.0.4 does not properly sanitise and escape a parameter before using it in a SQL statement, allowing unauthenticated users to perform SQL injection attacks. This affects a code path distinct from the one addressed by CVE-2024-44004. |
| The Nexter Blocks WordPress plugin before 5.0.2 does not sanitize uploaded SVG files and allows SVG uploads for any user able to upload files (Author by default), allowing them to upload a file containing malicious JavaScript that executes when the file is accessed, leading to Stored Cross-Site Scripting. |
| The Welcart e-Commerce WordPress plugin before 2.11.32 does not properly sanitise a value taken from an imported CSV file before using it in a SQL statement, allowing users with the Editor role and above (including its custom shop-management roles) to perform SQL injection attacks. |
| A vulnerability was found in mf-yang openclaw-cn 2026.2.5. This affects an unknown part of the file src/agents/bash-tools.exec.ts of the component Ggateway Exec Approval Flow. The manipulation results in incorrect authorization. The attack may be performed from remote. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
