Export limit exceeded: 401906 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401906 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98343 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel() When dma_device_put() drops the last reference on chan->device->ref, dma_device_release() runs and may free the dma_device along with its channels. dma_chan_put() then still reads chan->device->owner via dma_chan_to_owner() for the trailing module_put(). KASAN catches it: slab-use-after-free in dma_chan_put+0x3e6/0x4c0 Read of size 8 by task insmod/6319 Freed by task 6319: kfree+0x225/0x470 dma_chan_put+0x395/0x4c0 dmaengine_put+0xf8/0x160 Cache the module owner in dma_chan_put() before the put so the trailing module_put() does not need chan->device. | ||||
| CVE-2026-98342 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: wait for RCU readers before releasing dma_device dma_issue_pending_all() walks the dma_device_list with list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release() unlinks the device with list_del_rcu() and then calls device->device_release() (which in many drivers, such as plx_dma.c, directly calls kfree()). Because there is no grace period between unlinking the device and freeing it, concurrent RCU readers in dma_issue_pending_all() can access the device after it has been freed. The lockless walk originally relied on clients holding a dmaengine reference to pin the provider module, and therefore the device, for as long as they might traverse the list. Commit 8ad342a86359 ("dmaengine: Add reference counting to dma_device struct") decoupled the dma_device lifetime from the module reference, so the device can now be released while a reader is still walking the list. Add synchronize_rcu() before the device is freed, so RCU readers are guaranteed to have finished. Keep it unconditional: providers that do not implement device_release() free the device themselves once dma_async_device_unregister() returns. This call will delay for a grace period with dma_list_mutex held, which is safe and only teardown path is delayed. | ||||
| CVE-2026-98341 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't free driver-owned scan requests When an interface goes down while a scan is running, cfg80211 completes the scan towards userspace and frees the scan request. However, the driver can be convinced that it owns the request, since the cancellation is (intended to be) asynchronous. The WARN_ON() in the netdev notifier was meant to catch this, but it's not actually avoidable, so it triggers and we get a UAF in scan_done(). There doesn't seem to be a great way around it, so just track that the driver is still convinced it owns the request, and then just free it on completion if it was already cancelled. Also remove the warnings since they can trigger in the intended architecture. | ||||
| CVE-2026-98340 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: only group hidden BSSes with beacon entries When a probe response for an unknown BSS comes in, __cfg80211_bss_update() looks for an existing entry with the same BSSID and a hidden (zero-length or NUL-filled) SSID, and if it finds one it groups them, using the beacon IEs from the existing entry. But that could find another entry without a beacon, if it was also from a probe response (with SSID), so there's a group without beacon elements. If a beacon with a hidden SSID for that BSSID arrives later, cfg80211_combine_bsses() goes looking for the probe response entries that belong to it - i.e. entries with the same BSSID and channel that have no beacon IEs - and finds those two. They are already grouped with each other, so it hits its WARN_ON_ONCE(bss->pub.hidden_beacon_bss) WARN_ON_ONCE(!list_empty(&bss->hidden_list)) which are there because an entry without beacon elements is not supposed to be part of a group yet. Only combine entries when a beacon was already received, ones that are kept separate will be combined when a beacon arrives. | ||||
| CVE-2026-98339 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't filter by BSS type when removing stale entries When an assoc AP switches to a channel that already has a BSS entry, cfg80211_update_assoc_bss_entry() removes that entry before rehashing the real one, since the two would otherwise collide in the BSS rbtree. The lookup for that entry also required it to match the connection's BSS type, so an entry advertising e.g. the IBSS capability bit was left in place, and the following cfg80211_rehash_bss() then ran into it: WARN_ON(!cmp) Changing the type shouldn't really happen, but can be triggered by a rogue AP/device, so drop the check and remove any entries matching the comparison. | ||||
| CVE-2026-98338 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: ibss: ref BSS entry for joined event When the IBSS is joined, we only record the BSSID/channel in the event and look up the BSS entry when processing it. However, that's racy, e.g. a new scan with NL80211_SCAN_FLAG_FLUSH can remove it, causing a warning in the event work: !bss WARNING: net/wireless/ibss.c:37 at __cfg80211_ibss_joined+0x3d3/0x440 Workqueue: cfg80211 cfg80211_event_work cfg80211_process_wdev_events+0x39f/0x5b0 net/wireless/util.c:1144 cfg80211_process_rdev_events+0xa1/0x110 net/wireless/util.c:1179 cfg80211_event_work+0x2f/0x40 net/wireless/core.c:393 Do the lookup early (the driver is expected to only join an IBSS that has a BSS entry) and keep a reference to it. | ||||
| CVE-2026-98337 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't start a ROC while scanning The ROC work can be pending when a scan starts (which requires ROC list to be empty, but that's possible), and then a new ROC can be added to the list and the work will pick it up. Avoid starting that ROC if a scan made it between things, as otherwise we'll hit a warning later: WARNING: net/mac80211/offchannel.c:404 at ieee80211_start_next_roc+0x256/0x2d0 Workqueue: events_unbound cfg80211_wiphy_work Call Trace: __ieee80211_scan_completed+0x4fd/0xe40 net/mac80211/scan.c:537 ieee80211_scan_work+0x472/0x1ff0 net/mac80211/scan.c:1193 cfg80211_wiphy_work+0x410/0x570 net/wireless/core.c:513 | ||||
| CVE-2026-98336 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't offload TC setup on AP_VLAN interfaces AP_VLAN interfaces are purely virtual, so don't try to offload TC setup to drivers. We can't really use the AP interface either since we may not know it all the time, and it could technically even change. Just reject the TC offload so things get done in software. | ||||
| CVE-2026-98335 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: abort chanswitch when leaving a mesh The code in ieee80211_stop_mesh() leaves CSA active, but leaving the mesh released the channel context, so the CSA finalize work crashes: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:ieee80211_put_srates_elem+0x42/0x640 net/mac80211/util.c:3272 Call Trace: ieee80211_mesh_build_beacon+0xa83/0x1b50 net/mac80211/mesh.c:1093 ieee80211_mesh_rebuild_beacon+0xc7/0x170 net/mac80211/mesh.c:1147 ieee80211_mesh_finish_csa+0x131/0x210 net/mac80211/mesh.c:1542 ieee80211_set_after_csa_beacon net/mac80211/cfg.c:4085 [inline] __ieee80211_csa_finalize net/mac80211/cfg.c:4133 [inline] ieee80211_csa_finalize+0x633/0x1150 net/mac80211/cfg.c:4155 cfg80211_wiphy_work+0x2ab/0x450 net/wireless/core.c:438 Abort the channel switch properly. | ||||
| CVE-2026-98334 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset state when starting AP fails ieee80211_start_ap() can set enable_beacon (and beacon_int) and fail later, leaving it set forever. Scanning can then attempt to restore beaconing on such an interface, leading to: Oops: divide error: 0000 [#1] SMP KASAN NOPTI RIP: 0010:mac80211_hwsim_link_info_changed+0xca7/0xf00 Call Trace: drv_link_info_changed+0x413/0x860 net/mac80211/driver-ops.c:495 ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427 ieee80211_offchannel_return+0x381/0x580 net/mac80211/offchannel.c:160 __ieee80211_scan_completed+0x993/0xe30 net/mac80211/scan.c:519 ieee80211_scan_work+0x472/0x2010 net/mac80211/scan.c:1193 cfg80211_wiphy_work+0x2b7/0x550 net/wireless/core.c:538 in hwsim. Also, cfg80211 then allows changing the interface type, and the off-channel path getgs confused about beaconing as well, leading to another warning: WARNING: net/mac80211/driver-ops.c:468 at drv_link_info_changed+0x583/0x880 ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427 ieee80211_offchannel_stop_vifs+0x328/0x5c0 net/mac80211/offchannel.c:122 ieee80211_start_sw_scan net/mac80211/scan.c:583 [inline] __ieee80211_start_scan+0xfb6/0x1af0 net/mac80211/scan.c:882 Reset the state on failures to always have it correct. | ||||
| CVE-2026-98333 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset the LED state when ifup fails When the first interface comes up, the radio LED is turned on. This can start the TPT trigger timer, which continues running. But if bringing up the interface fails then the timer keeps running and won't be stopped by anything, eventually it can be freed: ODEBUG: free active (active state 0) object: ffff888127e12130 object type: timer_list hint: tpt_trig_timer+0x0/0x300 net/mac80211/led.c:145 WARNING: CPU: 0 PID: 5923 at lib/debugobjects.c:612 debug_print_object+0x1a2/0x2b0 debug_check_no_obj_freed+0x4b7/0x600 lib/debugobjects.c:1129 kfree+0x436/0x670 mm/slub.c:6818 ieee80211_led_exit+0x162/0x1c0 net/mac80211/led.c:210 ieee80211_unregister_hw+0x27e/0x3a0 net/mac80211/main.c:1706 rt2x00lib_remove_dev+0x55b/0x670 Undo the LED state in the error path. | ||||
| CVE-2026-98332 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: only operate on TDLS peers in the TDLS code ieee80211_tdls_oper() can operate on the AP station, which then yields various warnings when the AP station is removed then or at a later point in time after being confused for a TDLS peer. Always check that the station is a TDLS peer. | ||||
| CVE-2026-98331 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: unlist vifs when their netdev is unregistered mac80211 only removes vifs from the local->interfaces list when an interface is removed via ieee80211_if_remove(), before it unregisters the netdev. However, it's possible for a netdev to be unregistered without going through that: When the netns that holds the wiphy is destroyed, the wiphy is supposed to move to the init_ns, but that can run into allocation failures. Then, mac80211 has an interface listed that doesn't exist, and will eventually hit BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()! ... _cfg80211_unregister_wdev+0x24/0x36a [cfg80211] cfg80211_unregister_wdev+0x15/0x1d [cfg80211] ieee80211_remove_interfaces+0x1ff/0x257 [mac80211] ieee80211_unregister_hw+0x73/0x1d1 [mac80211] mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim] Remove the interface from the list in ->ndo_uninit if it's still around to avoid this. | ||||
| CVE-2026-98330 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: get the wiphy out of a dying network namespace When a network namespace is destroyed, cfg80211_pernet_exit() moves any wiphy back to the initial namespace, and just warns if that fails. But moving an interface can fail (due to allocation failures), and then the wiphy is left behind with a garbage netns pointer: Kernel mode fault at addr 0x30 genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211] nl80211_notify_wiphy+0xcd/0xe8 [cfg80211] wiphy_unregister+0x169/0x3fc [cfg80211] Note that commit debac3a20dec ("net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().") fixed another path that could reach it without allocation failures. Remove interfaces that cannot be moved instead of failing the switch, so that the wiphy always ends up in the initial namespace. In this case the netdev core will unregister the interfaces anyway. | ||||
| CVE-2026-98329 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't allow injecting frames wider than the chanctx Frames injected on a monitor interface can carry a radiotap field requesting a bandwidth, which mac80211 passes down to the driver regardless of the the actual operational bandwidth. If the bandwidth requested is too wide, that triggers a warning in hwsim: WARN_ON(hwsim_get_chanwidth(bw) > hwsim_get_chanwidth(confbw)) Drop such frames entirely instead since they cannot be sent. | ||||
| CVE-2026-98328 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: add HE 6 GHz capability in the scan elems len The HE 6 GHz Band Capability element is in the probe request for every band if 6 GHz is supported, so add the size to scan_ies_len. Otherwise, building probe request elements can fail, triggering the WARN_ON in __ieee80211_start_scan(). | ||||
| CVE-2026-98327 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: reset the CSA state when leaving ifmsh->csa is allocated in ieee80211_mesh_csa_beacon() and only freed in ieee80211_mesh_finish_csa(), i.e. when the channel switch completes. Leaving the mesh while a switch is still pending therefore leaks it. Additionally, ifmsh->csa_role and ifmsh->chsw_ttl have their state leak in this case, so things can get mixed up in addition to the memory leak. Refactor the reset and call it in ieee80211_stop_mesh() to fix it all. | ||||
| CVE-2026-98326 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: release the channel if start fails ieee80211_join_mesh() acquires a channel context and then calls ieee80211_start_mesh(), which can fail. In that case, the chanctx isn't released then interface removal will attempt to unassign it after it's removed from the driver, hitting: wlan0: Failed check-sdata-in-driver check, flags: 0x0 WARNING: net/mac80211/driver-ops.c:366 at drv_unassign_vif_chanctx ieee80211_assign_link_chanctx __ieee80211_link_release_channel ieee80211_link_release_channel ieee80211_teardown_sdata unregister_netdevice_many_notify _cfg80211_unregister_wdev ieee80211_remove_interfaces ieee80211_unregister_hw mac80211_hwsim_del_radio hwsim_exit_net Correctly release the channel on start failures. | ||||
| CVE-2026-98325 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set up the TX info early to fix failure paths The previous commit 2c51457d930f ("wifi: mac80211: free ack status frame on TX header build failure") cleaned up the leak, but still left the code a bit messy and the failed SKB didn't get reported to userspace. Fix this up by initialising skb->cb[] earlier, which allows using ieee80211_free_txskb() and therefore reports it for the failure in ieee80211_build_hdr(), and unifies the ieee80211_skb_resize() failure path with it. | ||||
| CVE-2026-98324 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: pxa: fix double counting of the hw descriptors pxad_alloc_desc() was converted from kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT) to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc itself - but only where the compiler has __builtin_counted_by_ref(), so from gcc 15.1 or clang 22.1 on. The loop below it still increments nb_desc, which makes it come out doubled there and correct elsewhere. nb_desc is what pxad_free_desc() iterates over and what set_updater_desc() indexes from, so set it explicitly and drop the increment. The error path has to lower it to the number of descriptors allocated so far, otherwise pxad_free_desc() would free entries that were never allocated. | ||||