| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In setClipboardAccessNotificationsEnabledForUser of ClipboardService.java, there is a possible mult-iuser isolation due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In writeToParcel of BleRssiRangingCapabilities.java, there is a possible way to obtain the Bluetooth MAC address due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In onCreate of ContactsPickerActivity.kt, there is a possible misleading UI due to a tapjacking/overlay attack. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In initForUserNoTracing of VoiceInteractionManagerService.java, there is a possible persistent denial of service due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of XmpDataParser.java, there is a possible improper data sanitization due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of rw_t3t.cc, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In updateInternal of MediaProvider.java, there is a possible expose contents of files due to a race condition. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In screenArgsForPermissionCheckIfAny of multiple locations there is a possible risk of unauthorized access due to a confused deputy. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In openFile of AppFuseBridge.java, there is a possible information disclosure due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible improper data sanitization due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Propagate SMU errors and validate S2D address
amd_stb_s2d_init() discards the return value of several S2D SMU commands.
When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the
failure is only noticed indirectly - if at all - and reported as -EIO,
masking the real error.
More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so
on failure phys_addr_low/hi are left uninitialised and the assembled
address is passed straight to devm_ioremap(). When the SMU leaves them at
zero this maps physical address 0 and trips the ioremap-on-RAM warning:
amd_pmc AMDI000B:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 13 PID: 4592 at arch/x86/mm/ioremap.c:...
Check the return value of each SMU command and propagate it, and reject a
zero physical address before calling devm_ioremap(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Remove all sysfs files on registration failure
ipmi_add_smi() creates the nr_users and nr_msgs files before trying to
create the maintenance_mode file. If that last creation fails, the error
path removes only nr_users before dropping the final reference to the
interface.
Remove nr_msgs as well so no sysfs attribute embedded in the freed
interface remains registered. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bnxt: ring the doorbell when SW USO exits early
When a burst of packets is handed down to the driver, the driver defers
the doorbell to the end by setting txr->kick_pending = 1. The normal TX
path handles this, but the SW USO path can miss it if it returns
early.
If bnxt_sw_udp_gso_xmit runs but returns early with NETDEV_TX_BUSY and
txr->kick_pending was previously set to 1, then the TX queue can
stall because the driver wrote some BDs but never wrote the doorbell.
The device won't know to do the TX which would generate the completion
that would wake the queue back up.
Simplify bnxt_sw_udp_gso_xmit to set txr->kick_pending in its success
case and check the flag on return. The added check after
bnxt_sw_udp_gso_xmit returns ensures that any pending doorbells are
written handling both successful USO and any early returns, which
prevents the TX queue stall mentioned above.
This TX queue stall was observed on a production system with a netdev TX
watchdog informing about the queue stall. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix stalled modem TX queue after runtime resume
ipa_start_xmit() unconditionally stops the TX queue before calling
pm_runtime_get(), relying on the wake scheduled by runtime resume
(ipa_modem_wake_queue_work()) to restart it once power is ACTIVE.
But that work is queued from within the runtime resume callback,
before the device's power state reaches RPM_ACTIVE, so it can run
while the device is still RPM_RESUMING. The wake is then consumed
too early: the transmit it restarts stops the queue again,
pm_runtime_get() returns -EINPROGRESS without arranging any future
wake (deferred_resume exists only for RPM_SUSPENDING), and after the
resume completes nothing is left to wake the queue. Transmit stalls
permanently: packets pile up in the qdisc behind the stopped queue,
the device runtime-suspends, and since the netdev registers no
ndo_tx_timeout the watchdog never fires. Observed on SM7635
(Fairphone 6) as the cellular data path going permanently deaf
within hours, RX included, since nothing resumes the suspended
endpoints.
Close the window by making the wake work wait for the resume to
complete (pm_runtime_get_sync()) before waking the queue. Every
queue stop is then guaranteed a later wake that happens while power
is ACTIVE; a transmit racing a new suspend/resume cycle re-schedules
the work. If the device could not be resumed, wake the queue anyway
so pending packets are dropped by the transmit path rather than
stranded.
The STARTED power flag used to narrow this window: a wake running
before the transmit path's stop suppressed that stop, but only once,
as the flag was cleared by the first stop it absorbed. Removing the
flag made a single transmit during an in-flight resume sufficient to
strand the queue, which is the form observed.
With an accelerated reproducer (autosuspend delay shortened to 5 ms,
~20 packets/s of TX), an unpatched kernel stalled three times in
230 s / 4380 packets; with this patch the same test ran 3601 s /
70298 packets without a stall. |
| In the Linux kernel, the following vulnerability has been resolved:
net: l2tp: do not propagate multicast notification errors
The tunnel create, tunnel modify, session create, and session modify
netlink handlers send multicast notifications through helpers that can fail
while allocating or encoding a message, or while multicasting it.
For tunnel and session create/modify, a notification is sent after the live
operation has completed. Returning a best-effort notification error as the
command result can therefore report failure for an operation that already
committed and can cause callers to retry and accumulate live objects.
Keep sending notifications for listener visibility, but do not propagate
their best-effort status as the command result. This also keeps the tunnel
modify command consistent with the other notification-only paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: hold a reference to the route device in mctp_route_lookup()
mctp_route_lookup() uses rt->dev without holding a reference on it.
mctp_route_lookup_single() returns the route under RCU only, so the
route's device can be torn down concurrently: mctp_dev_put() drops the
last reference and synchronously kfree()s mdev->addrs. mctp_dev_saddr()
then reads rt->dev->addrs[0], giving a use-after-free reachable by an
unprivileged local AF_MCTP user on the receive/forwarding path (no
CAP_NET_RAW required):
BUG: KASAN: slab-use-after-free in mctp_route_lookup
Read of size 1 at addr ... by task mctp_uaf/...
mctp_route_lookup
mctp_pkttype_receive
Freed by task ...:
kfree
mctp_dev_put
mctp_dev_notify
In the same window mctp_dst_from_route() -> mctp_dev_hold() also
increments a refcount that has already reached zero
("refcount_t: addition on 0 ... mctp_dev_hold").
This reintroduces the use-after-free class of CVE-2023-3439: the source
address lookup was moved ahead of the point where the destination takes
its device reference.
Take a reference with refcount_inc_not_zero() before touching rt->dev,
skip a device that is already dead, and drop the reference once the
destination has taken its own. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix flow mask use-after-free on flow deletion
The commit in the Fixes tag below made so flow->mask free is scheduled
via RCU right after it is removed from the flow table. The pointer
stays in the flow structure and it can be accessible while in the same
RCU critical section. This is done to avoid requiring ovs_mutex for
the ovs_flow_free().
However, while removing the flow during processing of CMD_DEL, we do
not take RCU read lock before the removal, and ovs_flow_cmd_fill_info()
uses the flow->mask pointer afterwards. The RCU read lock is taken,
but it's already late at that point. The comment on that line
acknowledges that the lock is cosmetic and doesn't serve a real purpose.
This leads to use-after-free if the RCU grace period passes between
removal and the filling. It is a short race window, but it is there
and can lead to a real crash in case memory allocation for the info
takes a bit longer:
BUG: KASAN: slab-use-after-free in __ovs_nla_put_key
net/openvswitch/flow_netlink.c:1996
BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30
net/openvswitch/flow_netlink.c:2250
Read of size 4 at addr ffff88801ee89970 by task ovs_flow_del_ec/9487
Call Trace:
<TASK>
__ovs_nla_put_key net/openvswitch/flow_netlink.c:1996
ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250
ovs_flow_cmd_fill_info+0x420/0x9c0 net/openvswitch/datapath.c:930
ovs_flow_cmd_del+0x53a/0x970 net/openvswitch/datapath.c:1467
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
</TASK>
Allocated by task 9487:
mask_alloc net/openvswitch/flow_table.c:967
flow_mask_insert net/openvswitch/flow_table.c:1012
ovs_flow_tbl_insert+0xea2/0x1a90 net/openvswitch/flow_table.c:1084
ovs_flow_cmd_new+0x7e3/0xd90 net/openvswitch/datapath.c:1086
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
Freed by task 9485:
rcu_free_sheaf+0x1e/0x100 mm/slub.c:5978
rcu_do_batch kernel/rcu/tree.c:2645
rcu_core+0x59c/0x10c0 kernel/rcu/tree.c:2897
handle_softirqs+0x1e4/0x9a0 kernel/softirq.c:622
...
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062
ovs_flow_tbl_remove() must be called after the ovs_flow_cmd_fill_info()
to avoid this race. This also helps with cleaning up the forced cast
and the cosmetic RCU read lock. Before the commit in the Fixes tag the
order did not matter as long as the flow object itself was not freed.
A wider RCU critical section could be another option, but we have a
GFP_KERNEL allocation in the way.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-32042. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phylink: correctly validate returned PCS in phylink_inband_caps
In phylink_inband_caps(), the PCS returned by mac_select_pcs is only
checked if NULL but mac_select_pcs can also return an error pointer.
This can cause a kernel panic as phylink_pcs_inband_caps() only checks
if passed PCS is not NULL and directly dereference ops from the phylink_pcs
struct.
Use the IS_ERR_OR_NULL macro to address both case where the returned
PCS can be NULL or an error pointer and prevent a kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ravb: avoid dereferencing an invalid PTP clock
The PTP clock is unavailable before the first open, so querying its
index can dereference a NULL pointer. Registration failures can also
leave an error pointer in priv->ptp.clock.
Cache the PHC index separately and report -1 while no clock is
registered. Normalize registration errors to NULL and preserve the
static timestamping capabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Release the Rx HopID that was handed out on mismatch
tb_xdomain_alloc_in_hopid() passes the wanted HopID to ida_alloc_range()
as the lower bound, so a taken id is not an error there: the allocator
returns the next free one above it. tbnet_connected_work() asks for the
peer's transmit path, treats any other id as a failure and returns
without releasing what it got, so that allocation stays live for the rest
of the XDomain connection with nothing left holding a reference to it.
Release the id when it is not the one we asked for, the same way the
error unwind at the end of the function releases the expected one. |
