| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_dsp_rproc: Add custom memory copy implementation for i.MX DSP Cores
The IRAM is part of the HiFi DSP.
According to hardware specification only 32-bits write are allowed
otherwise we get a Kernel panic.
Therefore add a custom memory copy and memset functions to deal with
the above restriction. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2()
Add SRCU read-side protection when reading PDPTR registers in
__get_sregs2().
Reading PDPTRs may trigger access to guest memory:
kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() ->
kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot()
kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(),
which uses srcu_dereference_check() and requires either kvm->srcu or
kvm->slots_lock to be held. Currently only vcpu->mutex is held,
triggering lockdep warning:
=============================
WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot
6.12.59+ #3 Not tainted
include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.5.1717/15100:
#0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824
__kvm_memslots include/linux/kvm_host.h:1062 [inline]
__kvm_memslots include/linux/kvm_host.h:1059 [inline]
kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline]
kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617
kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302
load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065
svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688
kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline]
__get_sregs2 arch/x86/kvm/x86.c:11784 [inline]
kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279
kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix locking usage for tcon fields
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix use-after-free in pci_bus_release_domain_nr()
Commit c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()")
introduced a use-after-free bug in the bus removal cleanup. The issue was
found with kfence:
[ 19.293351] BUG: KFENCE: use-after-free read in pci_bus_release_domain_nr+0x10/0x70
[ 19.302817] Use-after-free read at 0x000000007f3b80eb (in kfence-#115):
[ 19.309677] pci_bus_release_domain_nr+0x10/0x70
[ 19.309691] dw_pcie_host_deinit+0x28/0x78
[ 19.309702] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
[ 19.309734] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
[ 19.309752] platform_probe+0x90/0xd8
...
[ 19.311457] kfence-#115: 0x00000000063a155a-0x00000000ba698da8, size=1072, cache=kmalloc-2k
[ 19.311469] allocated by task 96 on cpu 10 at 19.279323s:
[ 19.311562] __kmem_cache_alloc_node+0x260/0x278
[ 19.311571] kmalloc_trace+0x24/0x30
[ 19.311580] pci_alloc_bus+0x24/0xa0
[ 19.311590] pci_register_host_bridge+0x48/0x4b8
[ 19.311601] pci_scan_root_bus_bridge+0xc0/0xe8
[ 19.311613] pci_host_probe+0x18/0xc0
[ 19.311623] dw_pcie_host_init+0x2c0/0x568
[ 19.311630] tegra_pcie_dw_probe+0x610/0xb28 [pcie_tegra194]
[ 19.311647] platform_probe+0x90/0xd8
...
[ 19.311782] freed by task 96 on cpu 10 at 19.285833s:
[ 19.311799] release_pcibus_dev+0x30/0x40
[ 19.311808] device_release+0x30/0x90
[ 19.311814] kobject_put+0xa8/0x120
[ 19.311832] device_unregister+0x20/0x30
[ 19.311839] pci_remove_bus+0x78/0x88
[ 19.311850] pci_remove_root_bus+0x5c/0x98
[ 19.311860] dw_pcie_host_deinit+0x28/0x78
[ 19.311866] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
[ 19.311883] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
[ 19.311900] platform_probe+0x90/0xd8
...
[ 19.313579] CPU: 10 PID: 96 Comm: kworker/u24:2 Not tainted 6.2.0 #4
[ 19.320171] Hardware name: /, BIOS 1.0-d7fb19b 08/10/2022
[ 19.325852] Workqueue: events_unbound deferred_probe_work_func
The stack trace is a bit misleading as dw_pcie_host_deinit() doesn't
directly call pci_bus_release_domain_nr(). The issue turns out to be in
pci_remove_root_bus() which first calls pci_remove_bus() which frees the
struct pci_bus when its struct device is released. Then
pci_bus_release_domain_nr() is called and accesses the freed struct
pci_bus. Reordering these fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix leak of 'r10bio->remaining' for recovery
raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.
Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: Put the cdns set active part outside the spin lock
The device may be scheduled during the resume process,
so this cannot appear in atomic operations. Since
pm_runtime_set_active will resume suppliers, put set
active outside the spin lock, which is only used to
protect the struct cdns data structure, otherwise the
kernel will report the following warning:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1
Hardware name: Freescale i.MX8QM MEK (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x64/0x80
dump_stack+0x1c/0x38
__might_resched+0x1fc/0x240
__might_sleep+0x68/0xc0
__pm_runtime_resume+0x9c/0xe0
rpm_get_suppliers+0x68/0x1b0
__pm_runtime_set_status+0x298/0x560
cdns_resume+0xb0/0x1c0
cdns3_controller_resume.isra.0+0x1e0/0x250
cdns3_plat_resume+0x28/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sme: Set new vector length before reallocating
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds
Commit 56124d6c87fd ("fsverity: support enabling with tree block size <
PAGE_SIZE") changed FS_IOC_ENABLE_VERITY to use __kernel_read() to read
the file's data, instead of direct pagecache accesses.
An unintended consequence of this is that the
'WARN_ON_ONCE(!(file->f_mode & FMODE_READ))' in __kernel_read() became
reachable by fuzz tests. This happens if FS_IOC_ENABLE_VERITY is called
on a fd opened with access mode 3, which means "ioctl access only".
Arguably, FS_IOC_ENABLE_VERITY should work on ioctl-only fds. But
ioctl-only fds are a weird Linux extension that is rarely used and that
few people even know about. (The documentation for FS_IOC_ENABLE_VERITY
even specifically says it requires O_RDONLY.) It's probably not
worthwhile to make the ioctl internally open a new fd just to handle
this case. Thus, just reject the ioctl on such fds for now. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
The subs function argument may be NULL, so do not use it before the NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: don't reissue in case of poll race on multishot request
A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.
A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix possible null pointer dereference
abo->tbo.resource may be NULL in amdgpu_vm_bo_update. |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds
If the "struct can_priv::echoo_skb" is accessed out of bounds, this
would cause a kernel crash. Instead, issue a meaningful warning
message and return with an error. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
When tearing down a 'hisi_hns3' PMU, we mistakenly run the CPU hotplug
callbacks after the device has been unregistered, leading to fireworks
when we try to execute empty function callbacks within the driver:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| CPU: 0 PID: 15 Comm: cpuhp/0 Tainted: G W O 5.12.0-rc4+ #1
| Hardware name: , BIOS KpxxxFPGA 1P B600 V143 04/22/2021
| pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
| pc : perf_pmu_migrate_context+0x98/0x38c
| lr : perf_pmu_migrate_context+0x94/0x38c
|
| Call trace:
| perf_pmu_migrate_context+0x98/0x38c
| hisi_hns3_pmu_offline_cpu+0x104/0x12c [hisi_hns3_pmu]
Use cpuhp_state_remove_instance_nocalls() instead of
cpuhp_state_remove_instance() so that the notifiers don't execute after
the PMU device has been unregistered.
[will: Rewrote commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: perf: Do not broadcast to other cpus when starting a counter
This command:
$ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000
gives rise to this kernel warning:
[ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436
[ 444.364515] Modules linked in:
[ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73
[ 444.364771] Hardware name: riscv-virtio,qemu (DT)
[ 444.364868] epc : smp_call_function_many_cond+0x42c/0x436
[ 444.364917] ra : on_each_cpu_cond_mask+0x20/0x32
[ 444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800
[ 444.364966] gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0
[ 444.364982] t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0
[ 444.364998] s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000
[ 444.365013] a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100
[ 444.365029] a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000
[ 444.365044] s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98
[ 444.365060] s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000
[ 444.365075] s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001
[ 444.365090] s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6
[ 444.365104] t5 : 0000000400000000 t6 : ff60000002e010d0
[ 444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[ 444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436
[ 444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32
[ 444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa
[ 444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66
[ 444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac
[ 444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c
[ 444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e
[ 444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96
[ 444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52
[ 444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98
[ 444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a
[ 444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da
[ 444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a
[ 444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114
[ 444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a
[ 444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46
[ 444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74
[ 444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e
[ 444.365796] ---[ end trace 0000000000000000 ]---
That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic
in riscv SBI mmap support") was wrong since there is no need to broadcast
to other cpus when starting a counter, that's only needed in mmap when
the counters could have already been started on other cpus, so simply
remove this broadcast. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/powernv: Add a null pointer check to scom_debug_init_one()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/powernv: Add a null pointer check in opal_event_init()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen2: Add sanity check for session stop
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet
to firmware to fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ftrace: fix module PLTs with mcount
Li Huafei reports that mcount-based ftrace with module PLTs was broken
by commit:
a6253579977e4c6f ("arm64: ftrace: consistently handle PLTs.")
When a module PLTs are used and a module is loaded sufficiently far away
from the kernel, we'll create PLTs for any branches which are
out-of-range. These are separate from the special ftrace trampoline
PLTs, which the module PLT code doesn't directly manipulate.
When mcount is in use this is a problem, as each mcount callsite in a
module will be initialized to point to a module PLT, but since commit
a6253579977e4c6f ftrace_make_nop() will assume that the callsite has
been initialized to point to the special ftrace trampoline PLT, and
ftrace_find_callable_addr() rejects other cases.
This means that when ftrace tries to initialize a callsite via
ftrace_make_nop(), the call to ftrace_find_callable_addr() will find
that the `_mcount` stub is out-of-range and is not handled by the ftrace
PLT, resulting in a splat:
| ftrace_test: loading out-of-tree module taints kernel.
| ftrace: no module PLT for _mcount
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffff800029180014>] 0xffff800029180014
| actual: 44:00:00:94
| Initializing ftrace call sites
| ftrace record flags: 2000000
| (0)
| expected tramp: ffff80000802eb3c
| ------------[ cut here ]------------
| WARNING: CPU: 3 PID: 157 at kernel/trace/ftrace.c:2120 ftrace_bug+0x94/0x270
| Modules linked in:
| CPU: 3 PID: 157 Comm: insmod Tainted: G O 6.0.0-rc6-00151-gcd722513a189-dirty #22
| Hardware name: linux,dummy-virt (DT)
| pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x94/0x270
| lr : ftrace_bug+0x21c/0x270
| sp : ffff80000b2bbaf0
| x29: ffff80000b2bbaf0 x28: 0000000000000000 x27: ffff0000c4d38000
| x26: 0000000000000001 x25: ffff800009d7e000 x24: ffff0000c4d86e00
| x23: 0000000002000000 x22: ffff80000a62b000 x21: ffff8000098ebea8
| x20: ffff0000c4d38000 x19: ffff80000aa24158 x18: ffffffffffffffff
| x17: 0000000000000000 x16: 0a0d2d2d2d2d2d2d x15: ffff800009aa9118
| x14: 0000000000000000 x13: 6333626532303830 x12: 3030303866666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : 3362653230383030
| x8 : c0000000ffffefff x7 : 0000000000017fe8 x6 : 000000000000bff4
| x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : 0000000000000001
| x2 : ad2cb14bb5438900 x1 : 0000000000000000 x0 : 0000000000000022
| Call trace:
| ftrace_bug+0x94/0x270
| ftrace_process_locs+0x308/0x430
| ftrace_module_init+0x44/0x60
| load_module+0x15b4/0x1ce8
| __do_sys_init_module+0x1ec/0x238
| __arm64_sys_init_module+0x24/0x30
| invoke_syscall+0x54/0x118
| el0_svc_common.constprop.4+0x84/0x100
| do_el0_svc+0x3c/0xd0
| el0_svc+0x1c/0x50
| el0t_64_sync_handler+0x90/0xb8
| el0t_64_sync+0x15c/0x160
| ---[ end trace 0000000000000000 ]---
| ---------test_init-----------
Fix this by reverting to the old behaviour of ignoring the old
instruction when initialising an mcount callsite in a module, which was
the behaviour prior to commit a6253579977e4c6f. |
| In the Linux kernel, the following vulnerability has been resolved:
class: fix possible memory leak in __class_register()
If class_add_groups() returns error, the 'cp->subsys' need be
unregister, and the 'cp' need be freed.
We can not call kset_unregister() here, because the 'cls' will
be freed in callback function class_release() and it's also
freed in caller's error path, it will cause double free.
So fix this by calling kobject_del() and kfree_const(name) to
cleanup kobject. Besides, call kfree() to free the 'cp'.
Fault injection test can trigger this:
unreferenced object 0xffff888102fa8190 (size 8):
comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s)
hex dump (first 8 bytes):
70 6b 74 63 64 76 64 00 pktcdvd.
backtrace:
[<00000000e7c7703d>] __kmalloc_track_caller+0x1ae/0x320
[<000000005e4d70bc>] kstrdup+0x3a/0x70
[<00000000c2e5e85a>] kstrdup_const+0x68/0x80
[<000000000049a8c7>] kvasprintf_const+0x10b/0x190
[<0000000029123163>] kobject_set_name_vargs+0x56/0x150
[<00000000747219c9>] kobject_set_name+0xab/0xe0
[<0000000005f1ea4e>] __class_register+0x15c/0x49a
unreferenced object 0xffff888037274000 (size 1024):
comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s)
hex dump (first 32 bytes):
00 40 27 37 80 88 ff ff 00 40 27 37 80 88 ff ff .@'7.....@'7....
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
backtrace:
[<00000000151f9600>] kmem_cache_alloc_trace+0x17c/0x2f0
[<00000000ecf3dd95>] __class_register+0x86/0x49a |
