| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: bound check rq_pages index in inline path
svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without
verifying rc_curpage stays within the allocated page array. Add guards
before the first use and after advancing to a new page. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: Avoid overflowing userspace buffer on stats query
The ethtool -S command operates across three ioctl calls:
ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and
ETHTOOL_GSTATS for the values.
If the number of stats changes between these calls (e.g., due to device
reconfiguration), userspace's buffer allocation will be incorrect,
potentially leading to buffer overflow.
Drivers are generally expected to maintain stable stat counts, but some
drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making
this scenario possible.
Some drivers try to handle this internally:
- bnad_get_ethtool_stats() returns early in case stats.n_stats is not
equal to the driver's stats count.
- micrel/ksz884x also makes sure not to write anything beyond
stats.n_stats and overflow the buffer.
However, both use stats.n_stats which is already assigned with the value
returned from get_sset_count(), hence won't solve the issue described
here.
Change ethtool_get_strings(), ethtool_get_stats(),
ethtool_get_phy_stats() to not return anything in case of a mismatch
between userspace's size and get_sset_size(), to prevent buffer
overflow.
The returned n_stats value will be equal to zero, to reflect that
nothing has been returned.
This could result in one of two cases when using upstream ethtool,
depending on when the size change is detected:
1. When detected in ethtool_get_strings():
# ethtool -S eth2
no stats available
2. When detected in get stats, all stats will be reported as zero.
Both cases are presumably transient, and a subsequent ethtool call
should succeed.
Other than the overflow avoidance, these two cases are very evident (no
output/cleared stats), which is arguably better than presenting
incorrect/shifted stats.
I also considered returning an error instead of a "silent" response, but
that seems more destructive towards userspace apps.
Notes:
- This patch does not claim to fix the inherent race, it only makes sure
that we do not overflow the userspace buffer, and makes for a more
predictable behavior.
- RTNL lock is held during each ioctl, the race window exists between
the separate ioctl calls when the lock is released.
- Userspace ethtool always fills stats.n_stats, but it is likely that
these stats ioctls are implemented in other userspace applications
which might not fill it. The added code checks that it's not zero,
to prevent any regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix middle attribute validation in push_nsh() action
The push_nsh() action structure looks like this:
OVS_ACTION_ATTR_PUSH_NSH(OVS_KEY_ATTR_NSH(OVS_NSH_KEY_ATTR_BASE,...))
The outermost OVS_ACTION_ATTR_PUSH_NSH attribute is OK'ed by the
nla_for_each_nested() inside __ovs_nla_copy_actions(). The innermost
OVS_NSH_KEY_ATTR_BASE/MD1/MD2 are OK'ed by the nla_for_each_nested()
inside nsh_key_put_from_nlattr(). But nothing checks if the attribute
in the middle is OK. We don't even check that this attribute is the
OVS_KEY_ATTR_NSH. We just do a double unwrap with a pair of nla_data()
calls - first time directly while calling validate_push_nsh() and the
second time as part of the nla_for_each_nested() macro, which isn't
safe, potentially causing invalid memory access if the size of this
attribute is incorrect. The failure may not be noticed during
validation due to larger netlink buffer, but cause trouble later during
action execution where the buffer is allocated exactly to the size:
BUG: KASAN: slab-out-of-bounds in nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch]
Read of size 184 at addr ffff88816459a634 by task a.out/22624
CPU: 8 UID: 0 PID: 22624 6.18.0-rc7+ #115 PREEMPT(voluntary)
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x70
print_address_description.constprop.0+0x2c/0x390
kasan_report+0xdd/0x110
kasan_check_range+0x35/0x1b0
__asan_memcpy+0x20/0x60
nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch]
push_nsh+0x82/0x120 [openvswitch]
do_execute_actions+0x1405/0x2840 [openvswitch]
ovs_execute_actions+0xd5/0x3b0 [openvswitch]
ovs_packet_cmd_execute+0x949/0xdb0 [openvswitch]
genl_family_rcv_msg_doit+0x1d6/0x2b0
genl_family_rcv_msg+0x336/0x580
genl_rcv_msg+0x9f/0x130
netlink_rcv_skb+0x11f/0x370
genl_rcv+0x24/0x40
netlink_unicast+0x73e/0xaa0
netlink_sendmsg+0x744/0xbf0
__sys_sendto+0x3d6/0x450
do_syscall_64+0x79/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Let's add some checks that the attribute is properly sized and it's
the only one attribute inside the action. Technically, there is no
real reason for OVS_KEY_ATTR_NSH to be there, as we know that we're
pushing an NSH header already, it just creates extra nesting, but
that's how uAPI works today. So, keeping as it is. |
| Out-of-bounds read in Remote Desktop Gateway Service allows an authorized attacker to disclose information over a network. |
| lwIP through 2.2.1 contains a stack out-of-bounds write vulnerability in mdns_handle_response that allows adjacent attackers to corrupt stack memory by sending mDNS responses with invalid domain names. Attackers on the local link can send multicast PTR answers with oversized RDLENGTH or SRV answers with RDLENGTH below 6 during a service search, overflowing a 256-byte stack buffer and crashing the device. |
| A Improper Validation of Specified Quantity in Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated attacker to cause a denial of service via a malformed RSVP packet when RSVP is enabled on the receiving interface. |
| IBM MQ could allow an authenticated attacker to cause a denial of service due to improper validation of offset values in MQOPEN requests. |
| librtmp (RTMPDump) through 2.6 contains a heap out-of-bounds read vulnerability in AMFProp_Decode that reads an AMF0 strict-array element count before checking that four bytes remain. A malicious RTMP server or man in the middle can send an AMF0 body ending with a strict-array type byte and fewer than four trailing bytes to crash the client. |
| An Improper Validation of Consistency within Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured BGP ISO-VPN peer to cause an rpd crash by sending a specific ISO-VPN update which is then processed by BMP route monitoring or NSR. |
| Insufficient Granularity of Access Control vulnerability in Apache Camel Platform HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The component decided whether an endpoint ran in proxy mode by testing whether its configured path started with the string proxy, rather than by matching the path exactly. Any endpoint whose path merely begins with those characters - proxyStatus, proxy-config, proxying and so on - therefore became a proxy endpoint without the route author asking for it. A proxy endpoint forwards requests onward, so an endpoint that was intended to serve its own content instead relays traffic on behalf of whoever calls it, which is both a request forgery primitive and an exposure of whatever the forwarding path can reach.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Proxy mode is now selected by an exact path match rather than by prefix. For deployments that cannot upgrade immediately, rename any endpoint path that begins with proxy but is not intended to be a proxy. |
| An issue was discovered in GStreamer gst-plugins-good before 1.28.2. While parsing an MP4 file, the isomp4 plugin's qtdemux_parse_uuid function may read past the end of a heap-allocated buffer, allowing an attacker to disclose heap memory contents. |
| snac2 before 2.93 contains a heap-based buffer overflow vulnerability in _xs_json_load_lexer() that allows unauthenticated remote attackers to corrupt heap memory by sending JSON strings containing a \u0000 escape. Attackers can send a single crafted application/activity+json POST to activitypub_post_handler(), which parses it before signature checks, overflowing heap allocations and crashing the server. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Heap-based buffer overflow in Remote Access Point-to-Point Protocol (PPP) EAP-TLS allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: Check range in proc_dointvec_ms_jiffies_minmax
Add the range check to do_proc_int_conv_ms_jiffies_minmax that commit
d174174c6776 ("sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with
functions") incorrectly removed. |
| Dimension is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Dimension is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, parseUserInformation in src/mms/iso_acse/acse.c checks len for zero before validating the negative bufPos returned by BerDecoder_decodeLength for a truncated long-form length. The continue path therefore swallows the error, reads buffer[-1], resets parsing to the beginning, and repeats the same malformed state. An unauthenticated remote peer can send a malformed AARE PDU during association to cause an infinite CPU loop under a normal allocator or a one-byte out-of-bounds read and process abort when the preceding byte is inaccessible. This issue is fixed in version 1.6.2. |
