| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: properly unregister fixed rate clocks
The additional resources allocated with clk_register_fixed_rate() need
to be released with clk_unregister_fixed_rate(), otherwise they are lost. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: lag: Check for LAG device before creating debugfs
__mlx5_lag_dev_add_mdev() may return 0 (success) even when an error
occurs that is handled gracefully. Consequently, the initialization
flow proceeds to call mlx5_ldev_add_debugfs() even when there is no
valid LAG context.
mlx5_ldev_add_debugfs() blindly created the debugfs directory and
attributes. This exposed interfaces (like the members file) that rely on
a valid ldev pointer, leading to potential NULL pointer dereferences if
accessed when ldev is NULL.
Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer
before attempting to create the debugfs entries. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix switchdev mode rollback in case of failure
If for some internal reason switchdev mode fails, we rollback to legacy
mode, before this patch, rollback will unregister the uplink netdev and
leave it unregistered causing the below kernel bug.
To fix this, we need to avoid netdev unregister by setting the proper
rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode.
devlink (431) used greatest stack depth: 11048 bytes left
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), \
necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload
mlx5_core 0000:00:03.0: Loading uplink representor for vport 65535
mlx5_core 0000:00:03.0: mlx5_cmd_out_err:816:(pid 456): \
QUERY_HCA_CAP(0x100) op_mod(0x0) failed, \
status bad parameter(0x3), syndrome (0x3a3846), err(-22)
mlx5_core 0000:00:03.0 enp0s3np0 (unregistered): Unloading uplink \
representor for vport 65535
------------[ cut here ]------------
kernel BUG at net/core/dev.c:12070!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 456 Comm: devlink Not tainted 6.16.0-rc3+ \
#9 PREEMPT(voluntary)
RIP: 0010:unregister_netdevice_many_notify+0x123/0xae0
...
Call Trace:
[ 90.923094] unregister_netdevice_queue+0xad/0xf0
[ 90.923323] unregister_netdev+0x1c/0x40
[ 90.923522] mlx5e_vport_rep_unload+0x61/0xc6
[ 90.923736] esw_offloads_enable+0x8e6/0x920
[ 90.923947] mlx5_eswitch_enable_locked+0x349/0x430
[ 90.924182] ? is_mp_supported+0x57/0xb0
[ 90.924376] mlx5_devlink_eswitch_mode_set+0x167/0x350
[ 90.924628] devlink_nl_eswitch_set_doit+0x6f/0xf0
[ 90.924862] genl_family_rcv_msg_doit+0xe8/0x140
[ 90.925088] genl_rcv_msg+0x18b/0x290
[ 90.925269] ? __pfx_devlink_nl_pre_doit+0x10/0x10
[ 90.925506] ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10
[ 90.925766] ? __pfx_devlink_nl_post_doit+0x10/0x10
[ 90.926001] ? __pfx_genl_rcv_msg+0x10/0x10
[ 90.926206] netlink_rcv_skb+0x52/0x100
[ 90.926393] genl_rcv+0x28/0x40
[ 90.926557] netlink_unicast+0x27d/0x3d0
[ 90.926749] netlink_sendmsg+0x1f7/0x430
[ 90.926942] __sys_sendto+0x213/0x220
[ 90.927127] ? __sys_recvmsg+0x6a/0xd0
[ 90.927312] __x64_sys_sendto+0x24/0x30
[ 90.927504] do_syscall_64+0x50/0x1c0
[ 90.927687] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 90.927929] RIP: 0033:0x7f7d0363e047 |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix potential double free of skb
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
net/x25/x25_in.c:x25_backlog_rcv() {
...
queued = x25_process_rx_frame(sk, skb);
...
if (!queued)
kfree_skb(skb);
} |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable kprobe_multi programs at attach time
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix incorrect pruning due to atomic fetch precision tracking
When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC
and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as
a destination, thus receiving the old value from the memory location.
The current backtracking logic does not account for this. It treats
atomic fetch operations the same as regular stores where the src
register is only an input. This leads the backtrack_insn to fail to
propagate precision to the stack location, which is then not marked
as precise!
Later, the verifier's path pruning can incorrectly consider two states
equivalent when they differ in terms of stack state. Meaning, two
branches can be treated as equivalent and thus get pruned when they
should not be seen as such.
Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to
also cover atomic fetch operations via is_atomic_fetch_insn() helper.
When the fetch dst register is being tracked for precision, clear it,
and propagate precision over to the stack slot. For non-stack memory,
the precision walk stops at the atomic instruction, same as regular
BPF_LDX. This covers all fetch variants.
Before:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
After:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0
mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1
mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: qixis-fpga: Fix error handling for devm_regmap_init_mmio()
devm_regmap_init_mmio() returns an ERR_PTR() on failure, not NULL.
The original code checked for NULL which would never trigger on error,
potentially leading to an invalid pointer dereference.
Use IS_ERR() and PTR_ERR() to properly handle the error case. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Handle DBC deactivation if the owner went away
When a DBC is released, the device sends a QAIC_TRANS_DEACTIVATE_FROM_DEV
transaction to the host over the QAIC_CONTROL MHI channel. QAIC handles
this by calling decode_deactivate() to release the resources allocated for
that DBC. Since that handling is done in the qaic_manage_ioctl() context,
if the user goes away before receiving and handling the deactivation, the
host will be out-of-sync with the DBCs available for use, and the DBC
resources will not be freed unless the device is removed. If another user
loads and requests to activate a network, then the device assigns the same
DBC to that network, QAIC will "indefinitely" wait for dbc->in_use = false,
leading the user process to hang.
As a solution to this, handle QAIC_TRANS_DEACTIVATE_FROM_DEV transactions
that are received after the user has gone away. |
| NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. Prior to version 2.0.39, the checkSQL() validation function that blocks dangerous SQL keywords (e.g., pg_read_file, LOAD_FILE, dblink) is applied on the collections:create and sqlCollection:execute endpoints but is entirely missing on the sqlCollection:update endpoint. An attacker with collection management permissions can create a SQL collection with benign SQL, then update it with arbitrary SQL that bypasses all validation, and query the collection to execute the injected SQL and exfiltrate data. This issue has been patched in version 2.0.39. |
| An Improper Access Control vulnerability in Ivanti EPMM before versions 12.6.1.1, 12.7.0.1, and 12.8.0.1 allows a remote authenticated attacker to gain administrative access. |
| An Improper Certificate Validation in Ivanti EPMM before versions 12.6.1.1, 12.7.0.1, and 12.8.0.1 allows a remote unauthenticated attacker to impersonate registered Sentry hosts and obtain valid CA-signed client certificates. |
| Improper neutralization of escape, meta, or control sequences in Microsoft Power Apps allows an authorized attacker to perform spoofing over a network. |
| Sandboxie is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, a local denial of service vulnerability exists in the Sandboxie kernel driver. An unprivileged process running inside a Standard Sandbox can send a malformed IOCTL to the \Device\SandboxieDriverApi driver, triggering an immediate kernel crash (BSOD). The vulnerability affects the Standard Sandbox configuration both with and without dropped administrator privileges, but does not affect the Security Hardened Sandbox configuration. This issue has been fixed in version 1.17.3. Users who cannot update can use the Security Hardened Sandbox configuration as a workaround. |
| i18nextify is a JavaScript library that adds website internationalization via a script tag, without source code changes. Versions prior to 4.0.8 substitute {{key}} interpolation tokens inside src and href attribute values with the raw string returned by i18next.t(). The substitution logic in src/localize.js (the replaceInside handler) only guards against a duplicated http:// origin prefix — it does not validate the URL scheme of the substituted value. A translated value such as javascript:alert(1) or data:text/html,<script>...</script> is applied unchanged to the live DOM attribute when an attacker can influence the content of a translation file or the translation-backend response — for example, via a compromised translation CDN, user-contributed locales, a MITM on a plain-HTTP backend, or write access to the translation JSON. This issue was patched in version 4.0.8. |
| netbox-docker before 2.5.0 has a superuser account with default credentials (admin password for the admin account, and 0123456789abcdef0123456789abcdef01234567 value for SUPERUSER_API_TOKEN). In practice on the public Internet, almost all users changed the password but only about 90% changed the token. Having a default token value was intentional and was valuable for the main intended use case of the netbox-docker product (isolated development networks). Some users engaged in an effort to repurpose netbox-docker for production. The documentation for this effort stated that the defaults must not be used. However, installation did not ensure non-default values. The Supplier was aware of the CVE ID assignment and did not object to the assignment. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Fix double free in dma-buf feature
The error path through vfio_pci_core_feature_dma_buf() ignores its
own advice to only use dma_buf_put() after dma_buf_export(), instead
falling through the entire unwind chain. In the unlikely event that
we encounter file descriptor exhaustion, this can result in an
unbalanced refcount on the vfio device and double free of allocated
objects.
Avoid this by moving the "put" directly into the error path and return
the errno rather than entering the unwind chain. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member
The counter driver can use HW channels 1 and 2, while the PWM driver can
use HW channels 0, 1, 2, 3, 4, 6, 7.
The dev member is assigned both by the counter driver and the PWM driver
for channels 1 and 2, to their own struct device instance, overwriting
the previous value.
The sub-drivers race to assign their own struct device pointer to the
same struct rz_mtu3_channel's dev member.
The dev member of struct rz_mtu3_channel is used by the counter
sub-driver for runtime PM.
Depending on the probe order of the counter and PWM sub-drivers, the
dev member may point to the wrong struct device instance, causing the
counter sub-driver to do runtime PM actions on the wrong device.
To fix this, use the parent pointer of the counter, which is assigned
during probe to the correct struct device, not the struct device pointer
inside the shared struct rz_mtu3_channel. |
| In the Linux kernel, the following vulnerability has been resolved:
counter: rz-mtu3-cnt: prevent counter from being toggled multiple times
Runtime PM counter is incremented / decremented each time the sysfs
enable file is written to.
If user writes 0 to the sysfs enable file multiple times, runtime PM
usage count underflows, generating the following message.
rz-mtu3-counter rz-mtu3-counter.0: Runtime PM usage count underflow!
At the same time, hardware registers end up being accessed with clocks
off in rz_mtu3_terminate_counter() to disable an already disabled
channel.
If user writes 1 to the sysfs enable file multiple times, runtime PM
usage count will be incremented each time, requiring the same number of
0 writes to get it back to 0.
If user writes 0 to the sysfs enable file while PWM is in progress, PWM
is stopped without counter being the owner of the underlying MTU3
channel.
Check against the cached count_is_enabled value and exit if the user
is trying to set the same enable value. |
| Improper neutralization of special elements used in an sql command ('sql injection') in SQL Server allows an authorized attacker to elevate privileges locally. |
