Export limit exceeded: 362458 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (45833 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45831 | 2 Chroma, Trychroma | 2 Chromadb, Chromadb | 2026-06-16 | 8.8 High |
| The SimpleRBACAuthorizationProvider authorization provider in versions 0.5.0 or later of the ChromaDB Python project evaluates whether a user holds a given permission but never checks which tenant, database, or collection that permission applies to allowing users to perform cross tenant actions. | ||||
| CVE-2026-53703 | 1 Redhat | 1 Enterprise Linux | 2026-06-16 | 7.1 High |
| A vulnerability was found in the GStreamer RealMedia demuxer (gst-plugins-ugly). When processing a RealMedia (.rm) file, the demuxer parses MDPR (media properties) chunks to configure audio streams. For audio stream header versions 4 and 5, the parser reads fields such as codec type, packet size, sample rate, channel count, and extra codec data length from fixed offsets within the chunk without first checking that the chunk contains enough data. If a malicious file provides an MDPR chunk that is too small to contain a complete audio stream header, the parser reads beyond the end of the buffer. This can cause the application to crash. In some cases, bytes read past the buffer boundary may be incorporated into stream metadata, which could result in limited information disclosure. | ||||
| CVE-2026-46049 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Add fallback to default RSR for S/PDIF spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR for the MSR calculation loop. However, pll_rate is only updated in atc_pll_init() and not in hw_pll_init(), so it remains 0 after the card init. When spdif_passthru_playback_setup() skips atc_pll_init() for 32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin indefinitely. Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects the hardware state, since hw_card_init() already configures the PLL to the default RSR. | ||||
| CVE-2026-46050 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix deadlock with check operation and nowait requests When an array check is running it will raise the barrier at which point normal requests will become blocked and increment the nr_pending value to signal there is work pending inside of wait_barrier(). NOWAIT requests do not block and so will return immediately with an error, and additionally do not increment nr_pending in wait_barrier(). Upstream change commit 43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit this condition. raid_end_bio_io() eventually calls allow_barrier() and it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even though the corresponding increment on nr_pending didn't happen in the NOWAIT case. This can be easily seen by starting a check operation while an application is doing nowait IO on the same array. This results in a deadlocked state due to nr_pending value underflowing and so the md resync thread gets stuck waiting for nr_pending to == 0. Output of r10conf state of the array when we hit this condition: crash> struct r10conf barrier = 1, nr_pending = { counter = -41 }, nr_waiting = 15, nr_queued = 0, Example of md_sync thread stuck waiting on raise_barrier() and other requests stuck in wait_barrier(): md1_resync [<0>] raise_barrier+0xce/0x1c0 [<0>] raid10_sync_request+0x1ca/0x1ed0 [<0>] md_do_sync+0x779/0x1110 [<0>] md_thread+0x90/0x160 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 kworker/u1040:2+flush-253:4 [<0>] wait_barrier+0x1de/0x220 [<0>] regular_request_wait+0x30/0x180 [<0>] raid10_make_request+0x261/0x1000 [<0>] md_handle_request+0x13b/0x230 [<0>] __submit_bio+0x107/0x1f0 [<0>] submit_bio_noacct_nocheck+0x16f/0x390 [<0>] ext4_io_submit+0x24/0x40 [<0>] ext4_do_writepages+0x254/0xc80 [<0>] ext4_writepages+0x84/0x120 [<0>] do_writepages+0x7a/0x260 [<0>] __writeback_single_inode+0x3d/0x300 [<0>] writeback_sb_inodes+0x1dd/0x470 [<0>] __writeback_inodes_wb+0x4c/0xe0 [<0>] wb_writeback+0x18b/0x2d0 [<0>] wb_workfn+0x2a1/0x400 [<0>] process_one_work+0x149/0x330 [<0>] worker_thread+0x2d2/0x410 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-1765 | 1 Redhat | 1 Enterprise Linux | 2026-06-16 | 5.6 Medium |
| A flaw was found in the `tracker-extract-mp3` component of GNOME localsearch (previously known as tracker-miners). This vulnerability, a heap buffer overflow, occurs when processing specially crafted MP3 files. A remote attacker could exploit this by providing a malicious MP3 file, leading to a Denial of Service (DoS) where the application crashes. It may also potentially expose sensitive information from the system's memory. | ||||
| CVE-2026-1764 | 1 Redhat | 1 Enterprise Linux | 2026-06-16 | 5.6 Medium |
| A flaw was found in GNOME localsearch (previously known as tracker-miners) MP3 Extractor. When processing specially crafted MP3 files containing ID3v2.4 tags, a missing bounds check in the `extract_performers_tags` function can lead to a heap buffer overflow. This vulnerability allows a remote attacker to cause a Denial of Service (DoS) by triggering a read of unmapped memory. In some cases, it could also lead to information disclosure by reading visible heap data. | ||||
| CVE-2026-48714 | 1 I18next | 1 I18next-http-middleware | 2026-06-16 | 9.1 Critical |
| i18next-http-middleware is a middleware to be used with Node.js web frameworks like express or Fastify and also for Deno. In versions prior to 3.9.7, the missingKeyHandler blocked the literal request-body keys __proto__, constructor, and prototype (added in 3.9.3, see GHSA-5fgg-jcpf-8jjw), but did not reject dotted variants such as "__proto__.polluted". Downstream backends that split the missing-key string on a configured keySeparator (notably i18next-fs-backend ≤ 2.6.5) hand these keys to an unguarded setPath() walker that writes to Object.prototype. Applications that expose missingKeyHandler to untrusted input AND use i18next-fs-backend ≤ 2.6.5 are directly exploitable for remote prototype pollution. Other downstream backends that split the missing-key string the same way may be similarly affected. Depending on the host application, polluted prototype properties may cause crashes, corrupted translation behaviour, configuration poisoning, or bypasses of property-based security checks. This issue has been fixed in version 3.9.7. If developers cannot upgrade immediately, they should do the following: do not expose missingKeyHandler to untrusted users (mount it behind authentication, or remove the route), add a request-body filter ahead of the handler that rejects any top-level key containing __proto__, constructor, or prototype after splitting on their configured keySeparator, and disable missing-key persistence (saveMissing: false) when accepting writes from untrusted input. | ||||
| CVE-2026-33997 | 2 Docker, Moby | 2 Engine, Moby | 2026-06-16 | 6.8 Medium |
| Moby is an open source container framework. Prior to version 29.3.1, a security vulnerability has been detected that allows plugins privilege validation to be bypassed during docker plugin install. Due to an error in the daemon's privilege comparison logic, the daemon may incorrectly accept a privilege set that differs from the one approved by the user. Plugins that request exactly one privilege are also affected, because no comparison is performed at all. This issue has been patched in version 29.3.1. | ||||
| CVE-2026-49110 | 2 Wordpress, Wp Swings | 2 Wordpress, Upsell Order Bump Offer For Woocommerce | 2026-06-16 | 7.5 High |
| Unauthenticated Broken Authentication in Upsell Order Bump Offer for WooCommerce <= 3.1.4 versions. | ||||
| CVE-2026-6250 | 1 Tp-link | 2 Tapo C110, Tapo C110 Firmware | 2026-06-16 | 8.1 High |
| An authenticated format string vulnerability exists in the ONVIF service of Tapo C110 v2 due to improper handling of user-controlled input. Externally controlled data is interpreted as a format string, which can be used to manipulate stack memory, including control flow data such as return addresses. A remote authenticated attacker may redirect execution flow to existing internal functions, triggering an unauthorized factory reset, leading to loss of configuration, deletion of stored credentials and service disruption. | ||||
| CVE-2026-45990 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: slub: fix data loss and overflow in krealloc() Commit 2cd8231796b5 ("mm/slub: allow to set node and align in k[v]realloc") introduced the ability to force a reallocation if the original object does not satisfy new alignment or NUMA node, even when the object is being shrunk. This introduced two bugs in the reallocation fallback path: 1. Data loss during NUMA migration: The jump to 'alloc_new' happens before 'ks' and 'orig_size' are initialized. As a result, the memcpy() in the 'alloc_new' block would copy 0 bytes into the new allocation. 2. Buffer overflow during shrinking: When shrinking an object while forcing a new alignment, 'new_size' is smaller than the old size. However, the memcpy() used the old size ('orig_size ?: ks'), leading to an out-of-bounds write. The same overflow bug exists in the kvrealloc() fallback path, where the old bucket size ksize(p) is copied into the new buffer without being bounded by the new size. A simple reproducer: // e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW while (1) { void *p = kmalloc(128, GFP_KERNEL); p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE); kfree(p); } demonstrates the issue: ================================================================== BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130 Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47): memcpy_orig+0x68/0x130 krealloc_node_align_noprof+0x1c8/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... kfence-#47: 0xffff8883ad756fc0-0xffff8883ad756fff, size=64, cache=kmalloc-64 allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago): krealloc_node_align_noprof+0x19c/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... ================================================================== Fix it by moving the old size calculation to the top of __do_krealloc() and bounding all copy lengths by the new allocation size. | ||||
| CVE-2026-45994 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix OOB reads in command_file_write due to missing size checks The command_file_write() handler allocates a kernel buffer of exactly count bytes and copies user data into it, but does not validate the buffer against the dot command protocol before passing it to get_dot_command_size() and get_dot_command_timeout(). Since both the allocation size (count) and the header fields (command_size, data_size) are independently user-controlled, an attacker can cause get_dot_command_size() to return a value exceeding the allocation, triggering OOB reads in get_dot_command_timeout() and an out-of-bounds memcpy_toio() that leaks kernel heap memory to the service processor. Fix with two guards: reject writes smaller than sizeof(struct dot_command_header) before allocation, then after copying user data reject commands where the buffer is smaller than the total size declared by the header (sizeof(header) + command_size + data_size). This ensures all subsequent header and payload field accesses stay within the buffer. | ||||
| CVE-2026-8356 | 1 The Document Foundation | 1 Libreoffice | 2026-06-16 | 5.5 Medium |
| LibreOffice can import presentations in the legacy binary PPT format. A stack buffer overflow existed when importing a colour-replacement record. Two fixed-size colour tables were filled from the file, but the write position was not reset between the two passes over the record, so a file whose combined colour counts exceeded the table size wrote past the end of the tables on the stack. In fixed versions the unused second pass is no longer read into those tables. | ||||
| CVE-2026-48710 | 2 Encode, Kludex | 2 Starlette, Starlette | 2026-06-16 | 6.5 Medium |
| Starlette is a lightweight ASGI framework/toolkit. Prior to version 1.0.1, the HTTP `Host` request header was not validated before being used to reconstruct `request.url`. Because the routing algorithm relies on the raw HTTP path while `request.url` is rebuilt from the `Host` header, a malformed header could make `request.url.path` differ from the path that was actually requested. Middleware and endpoints that apply security restrictions based on `request.url` (rather than the raw `scope` path) could therefore be bypassed. Users should upgrade to a version greater than or equal to version 1.0.1, which validates the `Host` header against the grammar of RFC 9112 §3.2 / RFC 3986 §3.2.2 when constructing `request.url` and falls back to `scope["server"]` for malformed values. | ||||
| CVE-2026-52719 | 1 Redhat | 1 Enterprise Linux | 2026-06-16 | 7.1 High |
| An out-of-bounds read vulnerability was found in the VA JPEG decoder in GStreamer's gst-plugins-bad. The JPEG parser reads a segment length value from the bitstream without validating it against available data. A remote attacker could trick a user into opening a specially crafted JPEG file, causing downstream parsing to read beyond the provided input buffer, leading to a crash or potential information disclosure. | ||||
| CVE-2026-48713 | 1 I18next | 1 I18next-fs-backend | 2026-06-16 | 9.1 Critical |
| Versions prior to 2.6.6 are vulnerable to prototype pollution via crafted missing-key strings when used to persist missing translation keys (e.g. via i18next-http-middleware's missingKeyHandler exposed to untrusted input). Backend.writeFile() splits each queued missing-key string on the configured keySeparator (default .) before calling the internal setPath() walker. The walker (getLastOfPath in lib/utils.js) did not guard against unsafe segments, so a key like "__proto__.polluted" was split into ["__proto__", "polluted"] and walked straight into Object.prototype, allowing an attacker to write arbitrary properties onto the global object prototype. Depending on the host application, polluted prototype properties may cause crashes, corrupted translation behaviour, configuration poisoning, or bypasses of property-based security checks. Applications are affected only if the missingKeyHandler (or another route that forwards untrusted request bodies to i18next.t(..., { ... }) with saveMissing: true) is reachable by untrusted users and the default behaviour of splitting missing-key strings on keySeparator is in use (i.e. keySeparator is not false). Apps that do not expose missing-key persistence to untrusted input are not directly affected through this attack path. This issue has been fixed in version 2.6.6. If developers using the library are unable to upgrade immediately, they should take the following precautions: do not expose i18next-http-middleware's missingKeyHandler to untrusted users (mount it behind authentication, or remove the route), disable missing-key persistence (saveMissing: false, or no backend.create implementation) when accepting writes from untrusted input, and set keySeparator: false in their i18next options to disable backend key splitting (note: this also disables nested translation keys). | ||||
| CVE-2026-53704 | 1 Redhat | 1 Enterprise Linux | 2026-06-16 | 7.1 High |
| A flaw was found in GStreamer's RealMedia demuxer in the gst-plugins-ugly package. When processing a RealMedia file containing a specially crafted FILEINFO metadata section, the demuxer parses variable-name and variable-value pairs using re_skip_pascal_string() without validating that offsets remain within the mapped buffer. Additionally, the element count controlling the parsing loop is read from attacker-controlled data without validation, which can cause an infinite loop. A crafted RealMedia file can cause the application to crash, hang, or potentially read limited adjacent memory contents. | ||||
| CVE-2026-10825 | 1 Moxa | 1 Nport 6000-g2 Series | 2026-06-16 | N/A |
| A denial-of-service vulnerability exists in the WebSocket API due to insufficient validation and handling of JSON-based requests. A low-privileged authenticated attacker can send a specially crafted request that causes service disruption and may result in an unexpected device reboot. | ||||
| CVE-2026-40215 | 1 Openvpn | 1 Openvpn | 2026-06-16 | N/A |
| A race condition in OpenVPN 2.6.0 through 2.6.19 and 2.7_alpha1 through 2.7.1 allows remote attackers to potentially cause a server crash or leak heap memory via a use-after-free triggered during TLS session promotion. | ||||
| CVE-2026-9669 | 1 Python | 1 Cpython | 2026-06-16 | 5.9 Medium |
| bz2.BZ2Decompressor objects could be reused after a decompression error. If an application caught the resulting OSError and retried with the same decompressor, crafted input could cause the decompressor to resume from an invalid internal state and perform out-of-bounds writes to a stack buffer. This could crash the process when processing untrusted data. | ||||