| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipip: fix skb leak in collect_md mode when metadata_dst allocation fails
In collect_md mode ipip_tunnel_rcv() returns 0 without freeing the skb
when ip_tun_rx_dst() fails to allocate the metadata_dst. ipip_rcv() and
mplsip_rcv() are registered as xfrm_tunnel handlers, so tunnel4_rcv()
and tunnelmpls4_rcv() read the zero return as "the packet has been
consumed" and do not free it either. The skb is leaked.
The other tunnel drivers all dispose of the packet at this point:
ip6_tunnel.c jumps to its drop label, ip_gre.c and ip6_gre.c return
PACKET_REJECT, which makes gre_rcv() free the skb. Only ipip returns 0.
Jump to the existing drop label instead. It frees the skb and still
returns 0, so the packet keeps being reported as consumed, which is what
we want here: the outer header has already been pulled, and neither the
remaining handlers nor an ICMP unreachable have any use for it.
Triggering this needs an ipip or mplsip tunnel in collect_md mode and an
atomic allocation failure, which is why it has gone unnoticed. |
| In the Linux kernel, the following vulnerability has been resolved:
params: fix charp corruption on allocation failure
param_set_charp() stores charp parameters in allocated memory after slab is
available, and releases the previous value when the parameter is updated.
The previous value is released before the replacement allocation succeeds.
If kmalloc_parameter() fails, the setter returns -ENOMEM with the parameter
left as NULL.
Failing zswap's compressor update before zswap is initialized can later
trigger:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:strcmp+0x10/0x30
Call Trace:
zswap_setup+0x3b1/0x490
zswap_enabled_param_set+0x5b/0xa0
param_attr_store+0x93/0xe0
module_attr_store+0x1c/0x30
kernfs_fop_write_iter+0x116/0x1f0
Allocate and copy the replacement first, then replace the parameter value
only after allocation succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix use-after-free in __rpc_clnt_handle_event and __rpc_clnt_remove_pipedir
Normal client creation goes through rpc_setup_pipedir(), which records
clnt->pipefs_sb, but the mount-event path in __rpc_clnt_handle_event()
calls rpc_setup_pipedir_sb() directly and never refreshes that field.
The umount path also removes the directory without clearing
clnt->pipefs_sb.
After a late pipefs mount or any remount, rpc_clnt_remove_pipedir()
compares the current superblock against a stale pipefs_sb pointer and
skips cleanup, leaving pipefs dentries whose inode private data still
points at a freed rpc_clnt, leading to a potential use-after-free during
subsequent rpc_info_open() or rpc_show_info() calls.
Fix this by properly updating clnt->pipefs_sb upon mount events and
clearing it during unmount or failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject oversized Read segments at decode time
The RPC/RDMA Read list decoder stores wire-supplied segment
lengths without validation. xdr_count_read_segments() checks
4-byte alignment for non-zero position values but does not
cap the segment length.
An oversized rs_length reaches svc_rdma_build_read_segment(),
which derives nr_bvec from it and can drive a large dynamic
bvec allocation before verifying that enough rq_pages remain.
If the post-allocation page-overrun guard fires, the freshly
acquired rw context is not returned, leaking the resource.
Reject any segment whose length exceeds the receive context's
page budget during Read list decoding, consistent with how
xdr_check_write_chunk() bounds Write segment counts against
rc_maxpages. Also return the rw context on the existing
post-allocation overrun path in svc_rdma_build_read_segment(),
keeping that defensive guard balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Use svc_xprt_put to free listener on create failure
svc_rdma_create() calls kfree(cma_xprt) when
svc_rdma_create_listen_id() fails. svc_xprt_init() has already
acquired a net namespace reference via get_net_track(); kfree
bypasses svc_xprt_free() which releases it.
Replace the kfree() with svc_xprt_put() so the kref_init birth
reference drops to zero and svc_xprt_free() dispatches
svc_rdma_free() to clean up properly. sc_cm_id is still NULL
at that point; the preceding patch added the necessary NULL
guard in svc_rdma_free().
svc_xprt_free() also drops the module reference via
module_put(), but the caller _svc_xprt_create() does the same
on xpo_create failure, double-putting the single
try_module_get() it acquired. Take a compensating
__module_get() before the svc_xprt_put() to keep the count
balanced, matching the convention in svc_rdma_accept()'s error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: reject VAT indexes equal to the entry count
UDF 1.50 virtual partition mapping uses the VAT as an array of physical
block mappings. s_num_entries stores the number of entries in that array,
not the highest valid index. The valid VAT indexes are therefore below
s_num_entries.
udf_get_pblock_virt15() currently rejects only indexes greater than
s_num_entries. A crafted image can request index s_num_entries, pass the
bounds check, and make the kernel read one entry past the allocated VAT table.
Change the check to reject block >= s_num_entries, so the count is handled as
an exclusive upper bound.
A crafted UDF image reproduced this on origin/master commit
0e35b9b6ec0ffcc5e23cbdec09f5c622ad532b53 with a KASAN slab-out-of-bounds
report in udf_get_pblock_virt15().
Trail of Bits has a reproducer that triggers kernel panic demonstrating the bug, and can share it if needed. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Replace SCX_RQ_BAL_KEEP with a dispatch verdict return
SCX_RQ_BAL_KEEP tells the pick to keep running the previous task, a leftover
from when balancing and picking were separate operations. An rq-level flag
only works while dispatches and picks pair up one to one, which core
scheduling breaks: selections interleave through dispatch's lock drops and a
pick can consume a stale flag, keeping a task that has since been dequeued.
Fixing core scheduling support requires the decision to travel with the
dispatch that made it. Make scx_dispatch_sched() and balance_one() return an
explicit verdict instead and drop the flag's plumbing from the tools autogen
enum headers.
Also factor the pick-side invocation, its follow-up queueing and the
post-dispatch checks out of do_pick_task_scx() into dispatch_pick(). No
functional changes intended.
v2: Drop the SCX_RQ_BAL_KEEP plumbing from the tools autogen enum headers
as well (Andrea). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix this_rq() assumptions in dispatch kfuncs
Under core scheduling, dispatch runs from within the core-wide pick and can
target a sibling rq, so ops.dispatch() may execute on a CPU different from
the dispatched rq's. Several kfunc paths assumed the two always coincide:
- scx_dsq_move() decided whether an rq lock is held by testing this_rq()'s
rq flags and lock-danced accordingly. A dispatch for a sibling took the
unlocked-context branch and acquired the source rq lock on top of the
already held dispatched rq lock which could deadlock.
- scx_bpf_sub_dispatch() dispatched this_rq() with its stashed
sub_dispatch_prev, which is NULL when dispatching for a sibling.
- finish_dispatch(), scx_bpf_dsq_reenq() and scx_bpf_dsq_nr_queued()
resolved SCX_DSQ_LOCAL to this CPU's local DSQ rather than the dispatched
rq's. The latter two are callable from other rq-locked operations too,
where SCX_DSQ_LOCAL now likewise resolves to the op's rq. This changes
behavior also without core scheduling, e.g. for ops.enqueue() running a
remote wakeup on the waking CPU, and is intended: which CPU happens to
execute an operation is incidental, the op's rq is what it is operating
on, and the resolution now matches the insert side where SCX_DSQ_LOCAL
dispatches land on the task's rq.
Use the rq tracked by scx_locked_rq(), which is set to the dispatched rq
around ops invocations and NULL in unlocked contexts. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix rq->core_pick corruption under core scheduling
Core scheduling's pick_next_task() picks what to run on every SMT sibling of
the core in a single pass under the shared core-wide rq lock. The selection
state is consistent only while the lock is held continuously, so
->pick_task() originally could not release it. However, since 4c95380701f5
("sched/ext: Fold balance_scx() into pick_task_scx()"), sched_ext runs
dispatch from inside the pick and dispatching can drop the rq lock. To
support this, pick_next_task() has been updated to restart the whole
selection when a pick returns RETRY_TASK after releasing the lock.
When selections on the same core interleave through the dropped lock, they
corrupt each other's state: one clears the other's rq->core_pick leading to
a NULL deref, or invalidates its keep-the-previous-task decision leaving a
dequeued task running, which deadlocks the next wakeup and matches the
reported hard hangs. A cookied ping-pong load on an SMT machine makes the
interleavings frequent and kills the kernel within seconds.
Fix it by making the pick return RETRY_TASK whenever dispatch released the
rq lock, so that a selection only ever commits picks made under a
continuously held lock. The previous patch's rq->scx.lock_drop_seq counts
the releases. A dispatch that touched nothing never releases the lock and
its verdict, including "nothing to run", stands: retries are bounded, each
following a dispatch that actually did something, and an idle CPU does not
loop.
If another dispatch is already in flight on the rq, skip dispatching and
pick from what is already queued locally - the in-flight dispatch has
released the lock, so its own selection will retry and re-pick this rq,
while returning RETRY_TASK here would only spin on the lock that dispatch
needs to finish.
Balance callbacks must run in the context that queued them, so they can only
be queued on the CPU's own rq. When dispatching for another rq, run the
deferred work directly instead - that rq may consume all its picks through
the core-sched fast path and never queue the callback itself.
The put_prev_task_scx() warning about a runnable task being left behind
assumed that dispatch ran as part of the very pick that is switching away.
That now only holds on the non-core path, so gate it and drop the
cookie-match test, which is always true without core scheduling, from its
condition. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users
scx_bpf_dsq_reenq() queues a deferred reenq (dru) that runs from
run_deferred(), not ops.dispatch(). If the DSQ is destroyed before the dru
runs, process_deferred_reenq_users() sees dsq->id == SCX_DSQ_INVALID and
hits the BUG_ON. destroy_dsq() doesn't flush pending drus, so just skip.
tj: Read dsq->id once with READ_ONCE(). Reading it separately in the INVALID
check and the BUG_ON would leave a window where destroy_dsq() can
invalidate the id between the two reads and still trigger the BUG_ON. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
During fuzz testing, the following issue was discovered:
BUG: KMSAN: uninit-value in __dma_map_sg_attrs+0x217/0x310
__dma_map_sg_attrs+0x217/0x310
dma_map_sg_attrs+0x4a/0x70
ata_qc_issue+0x9f8/0x1420
__ata_scsi_queuecmd+0x1657/0x1740
ata_scsi_queuecmd+0x79a/0x920
scsi_queue_rq+0x4472/0x4f40
blk_mq_dispatch_rq_list+0x1cca/0x3ee0
__blk_mq_sched_dispatch_requests+0x458/0x630
blk_mq_sched_dispatch_requests+0x15b/0x340
__blk_mq_run_hw_queue+0xe5/0x250
__blk_mq_delay_run_hw_queue+0x138/0x780
blk_mq_run_hw_queue+0x4bb/0x7e0
blk_mq_sched_insert_request+0x2a7/0x4c0
blk_execute_rq+0x497/0x8a0
sg_io+0xbe0/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Uninit was created at:
__alloc_pages+0x5c0/0xc80
alloc_pages+0xe0e/0x1050
blk_rq_map_user_iov+0x2b77/0x6100
blk_rq_map_user_io+0x2fa/0x4d0
sg_io+0xad6/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Bytes 14-15 of 16 are uninitialized
Memory access of size 16 starts at ffff88800cbdb000
When processing the last unaligned element of the scatterlist, it is
supplemented with missing bytes in the amount of pad_len. These bytes
remain uninitialized, which leads to a problem.
Extend last_sg->length by pad_len first, then use sg_zero_buffer() to
zero those pad_len bytes. sg_zero_buffer() uses sg_miter internally,
which correctly handles sg entries spanning multiple pages and padding
that crosses a page boundary.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: scp: Fix device reference leak on failed lookup
Make sure to drop the reference taken to the SCP device when attempting
to look up its driver data before the driver has been bound.
Note that holding a reference to a device does not prevent its driver
data from going away. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: Embed counter driver data in rdma_counter allocation
Commit 7e53b31acc7f ("RDMA/core: Create and destroy rdma_counter using
rdma_zalloc_drv_obj()") requires drivers implementing counter ops to
embed struct rdma_counter in a driver-specific struct, register its size
via INIT_RDMA_OBJ_SIZE, and provide a counter_init callback.
The ionic driver was merged without this adaptation, causing a NULL
pointer dereference in alloc_and_bind() since rdma_zalloc_drv_obj()
allocates zero bytes when size_rdma_counter is unset.
Consolidate struct ionic_counter into a new struct ionic_rdma_counter
that embeds struct rdma_counter, replace the xarray with a lightweight
ida for ID allocation, and add the required counter_init and
INIT_RDMA_OBJ_SIZE declarations. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Add UVERBS_ATTR_UHW to UVERBS_METHOD_REG_MR
The original commit missed that three drivers (mthca, irdma, siw) have UHW
data associated with reg_mr that cannot be passed through the ioctl. They
also assume that the udata cannot be NULL, so failing to pass a valid
udata can trigger a NULL udata crash in those drivers.
This never happens in real systems since in rdma-core ibv_cmd_reg_mr_ex()
does not accept a udata and those three drivers don't use it, however a
malicious userspace could trigger it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Guard legacy bundles without method_elm
The legacy write() path dispatches through a uverbs_api_write_method, but
the uverbs_attr_bundle passed to provider code does not have an ioctl
method element. If malformed provider input causes the common uverbs
validation code to emit an error message, uverbs_get_handler_fn()
dereferences the uninitialized method_elm pointer.
Initialize method_elm explicitly for legacy bundles and make
uverbs_get_handler_fn() return NULL when no ioctl method is present. The
legacy dispatcher continues to use its local write method, while the ioctl
path continues to use the registered ioctl handler. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Free cpu_buffer::free_page with subbuf_order
When sub-buffers use an order greater than 0, cpu_buffer->free_page is
allocated with subbuf_order. Use the correct order for
cpu_buffer->free_page. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: fix double-free of trailer_buf on readdir copy failure
On a readdir downcall, orangefs_devreq_write_iter() frees
op->downcall.trailer_buf with vfree() when copy_from_iter_full() fails,
but does not clear the pointer before goto Efault. The waiter in
do_readdir() is then woken with a negative status and frees the same
pointer again on its r < 0 path, causing a deterministic double-free.
A client holding /dev/pvfs2-req triggers it by sending a readdir
downcall whose declared trailer_size exceeds the bytes it supplies.
Clear the pointer after freeing so the readdir-side vfree() becomes a
no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: always run deallocs on copy-on-write completion
Local fuzzing of 6.12.94 has found the following memory leak
caused by doing 'copy_file_range()' within the same filesystem:
unreferenced object 0xffff88812192c980 (size 32):
comm "syz.0.49", pid 12095, jiffies 4294964143
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 ................
c0 c5 92 21 81 88 ff ff 00 02 00 00 00 06 00 00 ...!............
backtrace (crc 7068d63f):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
ocfs2_find_per_slot_free_list fs/ocfs2/alloc.c:6618 [inline]
ocfs2_cache_block_dealloc+0x155/0x4b0 fs/ocfs2/alloc.c:6786
ocfs2_cache_extent_block_free fs/ocfs2/alloc.c:6819 [inline]
ocfs2_unlink_path+0x286/0x450 fs/ocfs2/alloc.c:2613
ocfs2_rotate_subtree_left fs/ocfs2/alloc.c:2779 [inline]
__ocfs2_rotate_tree_left+0x1f6f/0x2da0 fs/ocfs2/alloc.c:2985
ocfs2_rotate_tree_left+0x283/0xe00 fs/ocfs2/alloc.c:3237
ocfs2_try_to_merge_extent+0xf56/0x1a20 fs/ocfs2/alloc.c:3825
ocfs2_split_extent+0x15f4/0x2940 fs/ocfs2/alloc.c:5138
ocfs2_clear_ext_refcount+0x2f6/0x550 fs/ocfs2/refcounttree.c:3098
ocfs2_replace_clusters fs/ocfs2/refcounttree.c:3131 [inline]
ocfs2_make_clusters_writable fs/ocfs2/refcounttree.c:3255 [inline]
ocfs2_replace_cow+0x991/0x1660 fs/ocfs2/refcounttree.c:3349
ocfs2_refcount_cow_hunk fs/ocfs2/refcounttree.c:3427 [inline]
ocfs2_refcount_cow+0x5e1/0x9f0 fs/ocfs2/refcounttree.c:3470
ocfs2_prepare_inode_for_write fs/ocfs2/file.c:2340 [inline]
ocfs2_file_write_iter+0xbda/0x1880 fs/ocfs2/file.c:2451
iter_file_splice_write+0x890/0xf60 fs/splice.c:743
do_splice_from fs/splice.c:944 [inline]
direct_splice_actor+0x232/0x480 fs/splice.c:1167
splice_direct_to_actor+0x4b4/0xb60 fs/splice.c:1111
do_splice_direct_actor fs/splice.c:1210 [inline]
do_splice_direct+0x10f/0x1c0 fs/splice.c:1236
do_sendfile+0x430/0xbf0 fs/read_write.c:1388
unreferenced object 0xffff88812192c5c0 (size 32):
comm "syz.0.49", pid 12095, jiffies 4294964143
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
29 70 00 00 00 00 00 00 19 00 00 00 00 00 00 00 )p..............
backtrace (crc afec850f):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
ocfs2_cache_block_dealloc+0x25c/0x4b0 fs/ocfs2/alloc.c:6793
ocfs2_cache_extent_block_free fs/ocfs2/alloc.c:6819 [inline]
ocfs2_unlink_path+0x286/0x450 fs/ocfs2/alloc.c:2613
ocfs2_rotate_subtree_left fs/ocfs2/alloc.c:2779 [inline]
__ocfs2_rotate_tree_left+0x1f6f/0x2da0 fs/ocfs2/alloc.c:2985
ocfs2_rotate_tree_left+0x283/0xe00 fs/ocfs2/alloc.c:3237
ocfs2_try_to_merge_extent+0xf56/0x1a20 fs/ocfs2/alloc.c:3825
ocfs2_split_extent+0x15f4/0x2940 fs/ocfs2/alloc.c:5138
ocfs2_clear_ext_refcount+0x2f6/0x550 fs/ocfs2/refcounttree.c:3098
ocfs2_replace_clusters fs/ocfs2/refcounttree.c:3131 [inline]
ocfs2_make_clusters_writable fs/ocfs2/refcounttree.c:3255 [inline]
ocfs2_replace_cow+0x991/0x1660 fs/ocfs2/refcounttree.c:3349
ocfs2_refcount_cow_hunk fs/ocfs2/refcounttree.c:3427 [inline]
ocfs2_refcount_cow+0x5e1/0x9f0 fs/ocfs2/refcounttree.c:3470
ocfs2_prepare_inode_for_write fs/ocfs2/file.c:2340 [inline]
ocfs2_file_write_iter+0xbda/0x1880 fs/ocfs2/file.c:2451
iter_file_splice_write+0x890/0xf60 fs/splice.c:743
do_splice_from fs/splice.c:9
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix readdir position truncation on 32-bit kernels
In ocfs2_dir_foreach_blk_el(), the directory cookie position is
rebuilt with
ctx->pos = (ctx->pos & ~(sb->s_blocksize - 1)) | offset;
`ctx->pos` is loff_t (signed 64-bit), while `sb->s_blocksize` is
unsigned long. On 32-bit kernels unsigned long is 32-bit, so the mask
~(sb->s_blocksize - 1)
is computed as a 32-bit unsigned value (e.g. 0xfffff000 for a 4 KiB
block size). In the AND expression with the 64-bit `ctx->pos`, that
unsigned operand is zero-extended to 64 bits per the usual arithmetic
conversions, yielding 0x00000000fffff000. The high 32 bits of
`ctx->pos` are silently cleared, even though directory size is
allowed to exceed 4 GiB.
When readdir() crosses the 4 GiB boundary on a 32-bit kernel the
position is reset back into the first 4 GiB block, making the
re-validation path re-enumerate already-returned dirents indefinitely.
This is ocfs2_dir_foreach_blk_el(), the extent-list readdir path taken
for all non-inline directories, so a directory large enough to cross
4 GiB reaches it.
This is the same class of bug that commit 3dce5bb82c97 ("exfat: Fix
bitwise operation having different size") fixed in exfat, and the
fix mirrors the equivalent ext4 fix in this series. Cast the operand
to loff_t so the mask is 64-bit before the AND:
ctx->pos = (ctx->pos & ~((loff_t)sb->s_blocksize - 1)) | offset;
64-bit kernels are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: fix NULL dereference on lockowner allocation failure
nlmclnt_locks_init_private() installs NLM file lock operations even when
nlmclnt_find_lockowner() fails to allocate a lockowner. nlmclnt_proc()
then returns -ENOMEM, but the VFS still tears down the partially
initialized file_lock and calls locks_release_private().
That invokes nlmclnt_locks_release_private(), which dereferences
fl->fl_u.nfs_fl.owner and crashes because the owner was never installed.
Clear fl_ops before attempting to initialize the NLM private state, and
install the NLM lock operations only after a lockowner has been allocated
successfully. |
