| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: don't flood a cancelling task with task_work
io_ring_exit_work() asks each task which has used the ring to remove its
tctx node, by task_work, and repeats that until the list is empty.
io_tctx_exit_cb() doesn't touch the node while the task is in
io_uring_cancel_generic(), which removes all the nodes at its end. So the
work item queues the callback again as soon as it has completed, for
nothing.
That is more than a waste of time. task_work_run() only returns when it
finds the list empty. If the rings are released from inside the
cancellation, because requests of other rings held the last references to
their files, up to 64 work items keep sending callbacks to the one task
which is running them. It never finds the list empty, never gets back to
the cancellation, the nodes stay, and so it goes on: a task with 60 pairs
of rings which poll each other ran 280000 callbacks in 5 seconds, 20
seconds after exit_group(). It ends when all the senders happen to be late
at the same time. Until then the task keeps a CPU and the work items busy.
An exiting task can't be killed meanwhile. execve() cancels the requests in
the same way, so a live task can get stuck there as well, for minutes. If
it takes more than five, the work items run into the
WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No
privilege is needed for any of this.
If the callback has met a task in cancellation, wait a little before it is
sent again. Nobody has to wake the work item up for that: either the node
is gone by then, or it is the turn of the next round. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: correct reservation fence slots for userq per-vm BOs eviction
It fixes both the move overflow and the eviction fence add for
evicting these per-vm BOs. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Hold trace_types_lock when resetting last boot data from readers
update_last_data_if_empty() is called from tracing_open() with O_TRUNC,
tracing_read_pipe() and tracing_buffers_read() without trace_types_lock.
Two readers can both pass the LAST_BOOT test and free module_delta
twice, and a module notifier can update module_delta while it is being
freed.
Take trace_types_lock in those paths and keep the callers that already
hold it on an unlocked variant. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/timeout: don't lose a cancel as io-wq arms a timeout
An IORING_OP_TIMEOUT run by io-wq, because of IOSQE_ASYNC, has the same
problem as poll, futex and waitid. io_wq_submit_work() looks at
IO_WQ_WORK_CANCEL once, before it issues the request. A cancel in between
flags the work, gets -EALREADY, and searches ->timeout_list in vain,
while the worker then adds the request and starts the timer:
io-wq worker io_try_cancel()
io_wq_submit_work()
IO_WQ_WORK_CANCEL isn't set
io_async_cancel_one()
sets IO_WQ_WORK_CANCEL
= -EALREADY
io_timeout_cancel() = -ENOENT
io_timeout()
adds the request to ->timeout_list
hrtimer_start()
= IOU_ISSUE_SKIP_COMPLETE
Nobody looks at the flag again, and the timeout runs its course. At ring
exit, io_uring_try_cancel_requests() cancels io-wq work and then kills
the timeouts the same way, so an exiting task can get stuck for the full
duration of such a timeout.
Look at the flag under ->timeout_lock, which the search takes as well,
and fail the request if it is set. If the search came first, the flag is
visible. If it comes later, it finds the request on the list. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: don't retry recv on uncommitted buffers
Commit 41b70df5b38b ("io_uring/net: commit partial buffers on retry")
commits ring provided buffers when a receive is going to be retried after
a partial transfer, so that another request using the same buffer group
can't be handed the memory the first one keeps receiving into. It commits
the number of bytes received so far. That does the job for a single
buffer which is consumed as a whole, but the request hangs on to all it
has mapped:
- For a buffer ring with IOU_PBUF_RING_INC only these bytes are consumed.
The rest of the buffer stays at the head of the ring.
- For a bundle only the buffers which hold these bytes are consumed, the
others that were peeked stay in the ring.
In both cases the next receive with that buffer group gets memory that
the retried request is still going to write to, and whoever comes last
overwrites the data of the other. What the retry fills isn't committed at
all, as the buffer list isn't known any more at that point. So the kernel
hands it out again later on, while the CQE tells the application that it
was used, and for an incremental buffer that it is done with.
The remainder can't be committed in advance: if the request ends up
receiving less, there is no way to tell the application that more was
consumed than the CQE accounts for. Complete the request with what it has
got instead of retrying it. MSG_WAITALL is no longer honoured for
receives into incremental buffers or multi buffer bundles, they can
return a short count, with the request marked as failed like for other
short MSG_WAITALL transfers. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: wake ring pollers for local task_work
With IORING_SETUP_DEFER_TASKRUN completions are queued as local work, and
only become CQEs when the submitter enters the kernel to wait for events.
For an application that finds out via poll() or epoll on the ring fd when
it is time to do that, io_uring_poll() reports EPOLLIN if local work is
pending.
That only helps if the work is there at the time of the call. When
DEFER_TASKRUN was added, io_req_local_work_add() did io_cqring_wake(),
which took care of tasks sleeping in poll() as well. Then polling got a
wait queue of its own, ->poll_wq, and the wake up in
io_req_local_work_add() was replaced by waking the submitter directly.
Since then ->poll_wq is only woken when CQEs are committed, which for
such a ring is done by the very task that is waiting to be told to:
submitter completion
poll(ring_fd)
io_uring_poll() // nothing yet
schedule()
io_req_local_work_add()
// ->cq_wait_nr: nobody waits
// sleeps on
Wake ->poll_wq when the first entry is put on the work list. Like for the
eventfd, that must not be done right away if the work is queued from a
wake up handler, as the chain of wake ups could get back to the wait
queue whose lock is held. Use an RCU callback in that case, with a
reference to the ring. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: protect node reset trace dump with node lock
The tipc_node_reset_links trace event asks tipc_node_dump() to walk the
node's link entries. Unlike the other node events that request link data,
this event runs without the node lock.
This permits bearer teardown to free a link while the trace callback is
dumping it:
CPU 0 CPU 1
trace_tipc_node_reset_links()
tipc_node_dump()
l = n->links[0].link
tipc_node_write_lock()
kfree(l)
n->links[0].link = NULL
tipc_node_write_unlock()
tipc_link_dump(l)
tipc_link_dump() then dereferences the stale pointer. KASAN reported:
BUG: KASAN: slab-use-after-free in tipc_link_dump
Read of size 4 by task poc/115
Call Trace:
tipc_link_dump+0x10cb/0x16b0
tipc_node_dump+0x4bb/0x740
trace_event_raw_event_tipc_node_class+0x258/0x360
tipc_node_reset_links+0x14d/0x1a0
tipc_rcv+0x13f5/0x3030
tipc_udp_recv+0x4e3/0x670
Allocated by task 0:
tipc_link_create+0x1e1/0x1020
tipc_node_check_dest+0x7d2/0x11a0
tipc_disc_rcv+0xdbf/0x1430
Freed by task 89:
kfree+0x131/0x3c0
tipc_node_link_down+0x267/0x4b0
tipc_node_delete_links+0xec/0x160
bearer_disable+0x107/0x260
Take the node write lock around the trace event. This serializes the
dump against tipc_node_link_down(delete=true), which frees the link
under the same write lock. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Do not initialize tracefs work if tracing is disabled
If trace buffer allocation fails during early boot (e.g. in
early_trace_init() -> allocate_trace_buffers()), tracing_disabled is
left set to 1 and the global trace array events list remains
uninitialized.
Later during boot, tracer_init_tracefs() (invoked via fs_initcall)
queues tracerfs_init_work asynchronously without checking if tracing was
disabled. When tracer_init_tracefs_work_func() runs, it calls
event_trace_init() and init_tracer_tracefs(&global_trace, NULL)
unconditionally. This leads to __find_event_file() dereferencing an
uninitialized tr->events list, causing an early boot NULL pointer
dereference Oops:
BUG: Kernel NULL pointer dereference on read at 0x00000010
Faulting instruction address: 0xc000000000485be0
Oops: Kernel access of bad area, sig: 7 [#1]
...
NIP [c000000000485be0] __find_event_file+0x70/0x3c0
LR [c000000000448874] init_tracer_tracefs+0x274/0xc80
Call Trace:
init_tracer_tracefs+0x274/0xc80
tracer_init_tracefs_work_func+0x50/0x320
process_one_work+0x1e8/0x5c0
worker_thread+0x1dc/0x3d0
kthread+0x194/0x1b0
start_kernel_thread+0x14/0x18
Check tracing_disabled at the beginning of tracer_init_tracefs_work_func()
and return immediately if tracing is disabled or failed to initialize,
preventing the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/openclose: keep the lock in io_pipe_fixed()
io_pipe_fixed() installs both ends of the pipe in the fixed file table,
drops ->uring_lock, and copies the slot numbers to the application. If
that faults, it takes the lock again and removes whatever is in these
slots.
If the request is run by io-wq the lock really is dropped in between, and
the slots are visible to everybody else. By the time the error path gets
to them, they may have been closed and reused, by IORING_OP_CLOSE and a
direct open or accept, or by IORING_REGISTER_FILES_UPDATE. Then a file is
removed from the table that has nothing to do with the failed request.
Do the copy with the lock held. Faulting in user memory under
->uring_lock is fine, the registration paths do it all the time. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: MOLY01898195; Issue ID: MSV-8906. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: Fix key_reject_and_link() race with keyring restriction
The restrict_link check in key_reject_and_link() is done before taking
the keyring semaphore, racing with a concurrent keyring_restrict()
that installs the restriction while holding the semaphore in write
mode.
Move the check to after __key_link_lock(), so it is done under the
semaphore, matching the pattern used in __key_create_or_update(). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Wait for SCX_OPSS_DISPATCHING before moving tasks off DSQs
A task can be found on a non-local DSQ while the CPU which dispatched it
is still running ops.dequeue() and hasn't cleared SCX_OPSS_DISPATCHING.
The DSQ consume and move paths don't wait for the dispatch to finish and
can operate on the task concurrently with the dispatcher.
Call scx_wait_dispatching() in scx_move_local_task_to_local_dsq(),
unlink_dsq_and_switch_rq_lock() and move_task_between_dsqs() before they
operate on the task. In scx_move_local_task_to_local_dsq(), wait before
scx_resolve_local_dsq() as it may update p->scx.flags. |
| A flaw in the connection management layer of the MongoDB Node.js driver can leave a pooled network connection in the pool for reuse while data from an earlier operation is still outstanding on it. In applications that enable an optional client-side operation timeout, an unauthenticated party that can send ordinary requests to the application may cause database replies to be paired with the wrong requests. This may result in unintended disclosure of other users' records, incorrect operation results being returned, and failures of legitimate requests. |
| Control Web Panel (CWP) before webpanel_version 1.16 contains an arbitrary file write and OS command injection vulnerability in the phpini_editor user panel module that allows attackers with access to the module to write attacker-controlled content to arbitrary paths and execute arbitrary OS commands. Attackers can exploit the acc=update action to write files via file_put_contents without path confinement and the acc=addlabelphpiniadv action to pass unsanitized input into shell_exec, achieving code execution in the user panel context. |
| In Eclipse Mnestix AAS Generator versions 0.1.0 up until but excluding 1.5.0, a practical upper bound on the client-supplied count parameter of the GET /api/v1/IdGenerator/submodelIds/{count} and GET /api/v2/IdGenerator/submodelIds/{count} endpoints is not enforced. The service generates and retains identifiers in memory before returning a response. A remote unauthenticated attacker can submit a large count to cause excessive memory consumption, potentially resulting in denial of service. Exploitation requires network access to the endpoint and successful retrieval of the ID-generation configuration from the configured backend repository. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix resident conversion in ntfs_new_attr_flags
When setting sparse/compressed flags on a resident attribute, the
function skipped the resident-to-non-resident conversion and
terminated. |
| Control Web Panel (CWP) before webpanel_version 1.16 contains a path traversal vulnerability in services/users/index.php that allows attackers to include arbitrary local PHP files by supplying an unsanitized module name parameter concatenated directly into an include path. Attackers can inject directory traversal sequences into the module name to achieve local file inclusion and execute arbitrary PHP code in the user panel context. |
| Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.8, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| Ninja Forms plugin for WordPress before 3.15.4 contains an incomplete server-side validation vulnerability that allows unauthenticated attackers to submit arbitrary values to Checkbox List, Multi-Select List, Image List, Country, and State fields because NF_Abstracts_List falls through to a validate() method that only checks required-field presence. Attackers can submit crafted formula payloads through the unauthenticated nf_ajax_submit endpoint that bypass CSV escaping applied only to Textbox and Textarea fields, resulting in CSV injection when an administrator downloads and opens the exported submissions file. |
| Functype is a family of TypeScript functional programming libraries. Prior to 1.4.4, the `set_functype_version` MCP tool in `functype-mcp-server` accepts an unconstrained `version` string using only `z.string()` validation in `packages/mcp-server/src/index.ts` and interpolates it into `functype@<version>` for `pnpm add`. Package-alias syntaxes such as `file:`, `npm:`, URLs, or paths can cause an arbitrary local or remote package to be installed as functype. Immediately afterward, `initDocsData(true)` in `packages/mcp-server/src/lib/docs/data.ts` resolves `functype/cli` and dynamically imports the newly installed module, executing attacker-controlled JavaScript with the MCP server process's privileges. Any MCP client able to send a `tools/call` request invoking the tool can exploit the flaw; the tool is enabled by default without authentication in `stdio` mode. A connected AI assistant susceptible to indirect prompt injection can also be induced to invoke it from a malicious document or web page. In non-default `TRANSPORT_TYPE=httpStream` deployments, a network-accessible attacker does not require local access. Successful execution can read process secrets, modify files, or terminate the server. This issue is fixed in `version` 1.4.4. |
