| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Slican telephone exchanges it is possible to manage the control panel remotely. An unauthenticated attacker can connect to the modem via a telephone with a specific caller ID. This allows them to bypass admin authentication and gain full access to the service protocol and configuration panel. This vulnerability is independent of the telephone exchanges configuration. If remote access is disabled, calling with this caller ID will temporarily enable it.
This issue was fixed in versions below:
- IPL-256: version 6.61.0040
- IPM-032: version 6.61.0040
- CCT-1668: version 6.56.0430
- MAC-6400: version 6.56.0430
- CXS-0424: version 6.30.0510
The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below:
- CCT-1668 (CCT1CPU)
- MAC-6400
- CXS-0424
These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading. |
| In Slican telephone exchanges secure key is generated in a predictable manner using properties of the telephone exchange which can be obtained without authentication. An unauthenticated attacker can deduce the secure key and obtain admin credentials.
This issue was fixed in versions below:
- IPx series: version 6.61.0040
- CCT-1668: version 6.56.0430
- MAC-6400: version 6.56.0430
- CXS-0424: version 6.30.0510
The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below:
- CCT-1668 (CCT1CPU)
- MAC-6400
- CXS-0424
These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading. |
| An origin validation error vulnerability in Synology Active Backup for Business Agent before 3.1.0-4967 allows local users to write arbitrary files with restricted content during installation. |
| IBM Engineering Lifecycle Management 7.0.3 Interim Fix 001 through Interim Fix 021, 7.1.0 Interim Fix 001 through Interim Fix 009, and 7.2.0 and 7.2.0 Interim Fix 001 is vulnerable to an XML external entity injection (XXE) attack when processing XML data. An authenticated attacker could exploit this vulnerability to expose sensitive information or consume memory resources. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in IniLerm Advanced IP Blocker advanced-ip-blocker allows DOM-Based XSS.This issue affects Advanced IP Blocker: from n/a through <= 8.10.7. |
| An low privileged remote attacker can exploit an unauthenticated SQL Injection vulnerability in the user_alarmprofile view due to improper neutralization of special elements in a SQL SELECT command. This can result in a total loss of confidentiality. |
| A highly authenticated attacker can alter the config generator injecting a payload into future created configurations. The device is not correctly checking this configuration value before passing it to an system execute leading to code execution. This can result in a total loss of confidentiality, integrity and availability. |
| Improperly validated order clauses lead to a SQL injection vulnerability in com_tags. |
| IBM InfoSphere Optim Test Data Fabrication 1.0.0, 1.0.0.1, 1.0.0.2, 1.0.2, 1.0.2.2, 1.0.2.3, 1.0.2.4, 1.0.2.5, 1.0.2.6, 1.0.2.7 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system |
| An improper validation of user-supplied input leads to a local file inclusion vulnerability. |
| IBM MQ Operator SC2: v3.2.0 through 3.2.23CD: v3.3.0, v3.4.0, v3.4.1, v3.5.0, v3.5.1 - v3.5.3, v3.6.0 - v3.6.4, v3.7.0 - v3.7.2, v3.8.0, v3.8.1, v3.9.0, v3.9.1LTS: v2.0.0 - 2.0.29 and IBM supplied MQ Advanced container images SC2: 9.4.0.6 through r1, 9.4.0.6-r2, 9.4.0.7-r1, 9.4.0.10-r1, 9.4.0.10-r2, 9.4.0.11-r1, 9.4.0.11-r2, 9.4.0.11-r3, 9.4.0.12-r1, 9.4.0.15-r1 - 9.4.0.15-r4, 9.4.0.16-r1, 9.4.0.16-r2, 9.4.0.17-r1, 9.4.0.17-r2, 9.4.0.20-r1CD: 9.4.1.0-r1, 9.4.1.0-r2, 9.4.1.1-r1, 9.4.2.0-r1, 9.4.2.0-r2, 9.4.2.1-r1, 9.4.2.1-r2, 9.4.3.0-r1, 9.4.3.0-r2, 9.4.3.1-r1 - 9.4.3.1-r3, 9.4.4.0-r1 - 9.4.4.0-r4, 9.4.4.1-r1, 9.4.5.0-r1, 9.4.5.0-r2LTS: 9.3.0.0-r1, 9.3.0.0-r2, 9.3.0.0-r3, 9.3.0.1-r1, 9.3.0.1-r2, 9.3.0.1-r3, 9.3.0.1-r4, 9.3.0.3-r1, 9.3.0.4-r1, 9.3.0.4-r2, 9.3.0.5-r1, 9.3.0.5-r2, 9.3.0.5-r3, 9.3.0.6-r1, 9.3.0.10-r1, 9.3.0.10-r2, 9.3.0.11-r1,9.3.0.11-r2, 9.3.0.15-r1, 9.3.0.16-r1, 9.3.0.16-r2, 9.3.0.17-r1, 9.3.0.17-r2, 9.3.0.17-r3, 9.3.0.20-r1, 9.3.0.20-r2, 9.3.0.21-r1, 9.3.0.21-r2, 9.3.0.21-r3, 9.3.0.25-r1, 9.4.0.0-r1, 9.4.0.0-r2, 9.4.0.0-r3, 9.4.0.5-r1, 9.4.0.5-r2 IBM MQ stores potentially sensitive information in log files that could be read by a local user. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe()
In au1200fb_drv_probe(), when platform_get_irq fails(), it directly
returns from the function with an error code, which causes a memory
leak.
Replace it with a goto label to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Add validation for MTU changes
Increasing the MTU beyond the HDS threshold causes the hardware to
fragment packets across multiple buffers. If a single-buffer XDP program
is attached, the driver will drop all multi-frag frames. While we can't
prevent a remote sender from sending non-TCP packets larger than the MTU,
this will prevent users from inadvertently breaking new TCP streams.
Traditionally, drivers supported XDP with MTU less than 4Kb
(packet per page). Fbnic currently prevents attaching XDP when MTU is too high.
But it does not prevent increasing MTU after XDP is attached. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a potential use-after-free of BTF object
Refcounting in the check_pseudo_btf_id() function is incorrect:
the __check_pseudo_btf_id() function might get called with a zero
refcounted btf. Fix this, and patch related code accordingly.
v3: rephrase a comment (AI)
v2: fix a refcount leak introduced in v1 (AI) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leak in ext4_ext_shift_extents()
In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the
function returns immediately without releasing the path obtained via
ext4_find_extent(), leading to a memory leak.
Fix this by jumping to the out label to ensure the path is properly
released. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: ab8500: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Commit 1c1f13a006ed ("power: supply: ab8500: Move to componentized
binding") introduced this issue during a refactorization. Fix this racy
use-after-free by making sure the IRQ is requested _after_ the
registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix race condition during PASID entry replacement
The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing
an active PASID entry (e.g., during domain replacement), the current
implementation calculates a new entry on the stack and copies it to the
table using a single structure assignment.
struct pasid_entry *pte, new_pte;
pte = intel_pasid_get_entry(dev, pasid);
pasid_pte_config_first_level(iommu, &new_pte, ...);
*pte = new_pte;
Because the hardware may fetch the 512-bit PASID entry in multiple
128-bit chunks, updating the entire entry while it is active (Present
bit set) risks a "torn" read. In this scenario, the IOMMU hardware
could observe an inconsistent state — partially new data and partially
old data — leading to unpredictable behavior or spurious faults.
Fix this by removing the unsafe "replace" helpers and following the
"clear-then-update" flow, which ensures the Present bit is cleared and
the required invalidation handshake is completed before the new
configuration is applied. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clear Present bit before tearing down context entry
When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.
While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.
Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.
Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: goldfish: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
