| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the gateway GPRS support node (GGSN) of Cisco ASR 5000 Series Aggregation Services Routers 17.3.9.62033 through 21.1.2 could allow an unauthenticated, remote attacker to redirect HTTP traffic sent to an affected device. More Information: CSCvc67927. |
| A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838. |
| A vulnerability in the Session Initiation Protocol (SIP) UDP throttling process of Cisco Unified Communications Manager (Cisco Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection. An attacker could exploit this vulnerability by sending the affected device a high rate of SIP messages. An exploit could allow the attacker to cause the device to reload unexpectedly. The device and services will restart automatically. This vulnerability affects Cisco Unified Communications Manager (CallManager) releases prior to the first fixed release; the following list indicates the first minor release that includes the fix for this vulnerability: 10.5.2.14900-16 11.0.1.23900-5 11.5.1.12900-2. Cisco Bug IDs: CSCuz72455. |
| apt-cacher before 1.7.15 and apt-cacher-ng before 3.4 allow HTTP response splitting via encoded newline characters, related to lack of blocking for the %0[ad] regular expression. |
| An issue was discovered in the Cisco WebEx Extension before 1.0.7 on Google Chrome, the ActiveTouch General Plugin Container before 106 on Mozilla Firefox, the GpcContainer Class ActiveX control plugin before 10031.6.2017.0126 on Internet Explorer, and the Download Manager ActiveX control plugin before 2.1.0.10 on Internet Explorer. A vulnerability in these Cisco WebEx browser extensions could allow an unauthenticated, remote attacker to execute arbitrary code with the privileges of the affected browser on an affected system. This vulnerability affects the browser extensions for Cisco WebEx Meetings Server and Cisco WebEx Centers (Meeting Center, Event Center, Training Center, and Support Center) when they are running on Microsoft Windows. The vulnerability is a design defect in an application programing interface (API) response parser within the extension. An attacker that can convince an affected user to visit an attacker-controlled web page or follow an attacker-supplied link with an affected browser could exploit the vulnerability. If successful, the attacker could execute arbitrary code with the privileges of the affected browser. |
| A vulnerability in the handling of list headers in Cisco cBR Series Converged Broadband Routers could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Cisco cBR-8 Converged Broadband Routers running vulnerable versions of Cisco IOS XE are affected. More Information: CSCux40637. Known Affected Releases: 15.5(3)S 15.6(1)S. Known Fixed Releases: 15.5(3)S2 15.6(1)S1 15.6(2)S 15.6(2)SP 16.4(1). |
| In libosip2 in GNU oSIP 4.1.0 and 5.0.0, a malformed SIP message can lead to a heap buffer overflow in the msg_osip_body_parse() function defined in osipparser2/osip_message_parse.c, resulting in a remote DoS. |
| A vulnerability in the TCP throttling process of Cisco UCS C-Series Rack Servers 3.0(0.234) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP SYN packets to a specific TCP listening port on an affected device. An exploit could allow the attacker to cause a specific TCP listening port to stop accepting new connections, resulting in a DoS condition. Cisco Bug IDs: CSCva65544. |
| spice versions though 0.13 are vulnerable to out-of-bounds memory access when processing specially crafted messages from authenticated attacker to the spice server resulting into crash and/or server memory leak. |
| Buffer overflow in TS-WPTCAM firmware version 1.18 and earlier, TS-WPTCAM2 firmware version 1.00, TS-WLCE firmware version 1.18 and earlier, TS-WLC2 firmware version 1.18 and earlier, TS-WRLC firmware version 1.17 and earlier, TS-PTCAM firmware version 1.18 and earlier, TS-PTCAM/POE firmware version 1.18 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors. |
| A vulnerability in the Data-in-Motion (DMo) process installed with the Cisco IOx application environment could allow an unauthenticated, remote attacker to cause a stack overflow that could allow remote code execution with root privileges in the virtual instance running on an affected device. The vulnerability is due to insufficient bounds checking in the DMo process. An attacker could exploit this vulnerability by sending crafted packets that are forwarded to the DMo process for evaluation. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. This vulnerability affects the following Cisco 800 Series Industrial Integrated Services Routers: Cisco IR809 and Cisco IR829. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52330. |
| A vulnerability in the Universal Plug-and-Play (UPnP) implementation in the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, Layer 2-adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition. The remote code execution could occur with root privileges. The vulnerability is due to incomplete range checks of the UPnP input data, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a malicious request to the UPnP listening port of the targeted device. An exploit could allow the attacker to cause the device to reload or potentially execute arbitrary code with root privileges. This vulnerability affects all firmware releases of the Cisco CVR100W Wireless-N VPN Router prior to Firmware Release 1.0.1.22. Cisco Bug IDs: CSCuz72642. |
| Augeas versions up to and including 1.8.0 are vulnerable to heap-based buffer overflow due to improper handling of escaped strings. Attacker could send crafted strings that would cause the application using augeas to copy past the end of a buffer, leading to a crash or possible code execution. |
| A vulnerability in Cisco Ultra Services Framework Staging Server could allow an authenticated, remote attacker with access to the management network to log in as an admin user of the affected device, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76681. Known Affected Releases: 21.0.0. |
| A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839. |
| A buffer overflow vulnerability in Juniper Networks NorthStar Controller Application prior to version 2.1.0 Service Pack 1 may allow an authenticated malicious user to cause a buffer overflow leading to a denial of service. |
| The drag-and-drop (DnD) function in VMware Workstation 12.x before version 12.5.4 and Fusion 8.x before version 8.5.5 has an out-of-bounds memory access vulnerability. This may allow a guest to execute code on the operating system that runs Workstation or Fusion. |
| VMware Unified Access Gateway (2.5.x, 2.7.x, 2.8.x prior to 2.8.1) and Horizon View (7.x prior to 7.1.0, 6.x prior to 6.2.4) contain a heap buffer-overflow vulnerability which may allow a remote attacker to execute code on the security gateway. |
| VMware Workstation (12.x prior to 12.5.3) and Horizon View Client (4.x prior to 4.4.0) contain multiple heap buffer-overflow vulnerabilities in JPEG2000 parser in the TPView.dll. On Workstation, this may allow a guest to execute code or perform a Denial of Service on the Windows OS that runs Workstation. In the case of a Horizon View Client, this may allow a View desktop to execute code or perform a Denial of Service on the Windows OS that runs the Horizon View Client. Exploitation is only possible if virtual printing has been enabled. This feature is not enabled by default on Workstation but it is enabled by default on Horizon View. |
| VMware Workstation (12.x prior to 12.5.3) and Horizon View Client (4.x prior to 4.4.0) contain a heap buffer-overflow vulnerability in TrueType Font (TTF) parser in the TPView.dll. On Workstation, this may allow a guest to execute code or perform a Denial of Service on the Windows OS that runs Workstation. In the case of a Horizon View Client, this may allow a View desktop to execute code or perform a Denial of Service on the Windows OS that runs the Horizon View Client. Exploitation is only possible if virtual printing has been enabled. This feature is not enabled by default on Workstation but it is enabled by default on Horizon View. |
