| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in conductor-oss conductor up to 3.32.4/3.33.0/3.34.0-rc3/4.0.0-alpha.1. This issue affects the function WorkflowSystemTask.start of the file PlannerContextFetchTask.java of the component PLANNER_CONTEXT_FETCH Task Handler. The manipulation of the argument url results in server-side request forgery. It is possible to launch the attack remotely. The exploit has been made public and could be used. The researcher claims to have submitted a GHSA on the repository of the project. |
| A vulnerability was determined in Convene Azeus Convene Board Management Portal 7.0.2.7_3 p72. The impacted element is an unknown function of the file /jsp/ge/dummy_launcher.jsp. Executing a manipulation of the argument REDIRECT_URL can lead to cross site scripting. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit()
The transmit loop in airoha_dev_xmit() reads fragment address and length
during its final iteration, when the loop index equals
skb_shinfo(skb)->nr_frags, at which point the fragment data is
uninitialized. While these values are never consumed, the read itself is
unsafe and may trigger a page fault. Fix this by avoiding the fragment
read on the last iteration.
Additionally, move the skb pointer from the first to the last used packet
descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb
until the final descriptor is processed. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int()
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rsnd: Fix potential out-of-bounds access of component_dais[]
component_dais[RSND_MAX_COMPONENT] is initially zero-initialized
and later populated in rsnd_dai_of_node(). However, the existing boundary check:
if (i >= RSND_MAX_COMPONENT)
does not guarantee that the last valid element remains zero. As a result,
the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero,
which may lead to an out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix use-after-free in rawdata dedup loop
aa_replace_profiles() walks ns->rawdata_list to dedup the incoming
policy blob against entries already attached to existing profiles.
Per the kernel-doc on struct aa_loaddata, list membership does not
hold a reference: profiles hold pcount, and when the last pcount
drops, do_ploaddata_rmfs() is queued on a workqueue that takes
ns->lock and removes the entry. Between dropping the last pcount
and the workqueue running, an entry remains on the list with
pcount == 0.
aa_get_profile_loaddata() is an unconditional kref_get() on
pcount, so when the dedup loop hits such an entry, refcount
hardening reports
refcount_t: addition on 0; use-after-free.
inside aa_replace_profiles(), and the poisoned counter then
trips "saturated" and "underflow" warnings on the subsequent
uses of the same loaddata.
Before commit a0b7091c4de4 ("apparmor: fix race on rawdata
dereference") the dedup path used a get_unless_zero-style helper
on a single counter, so the existing "if (tmp)" guard was
meaningful. The split-refcount refactor introduced
aa_get_profile_loaddata(), which has plain kref_get() semantics,
and the guard quietly became a no-op.
Introduce aa_get_profile_loaddata_not0(), matching the existing
_not0 convention used by aa_get_profile_not0(), and use it for
the rawdata_list dedup lookup so dying entries are skipped.
Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu
24.04 + stress-ng 0.17.06:
stress-ng --apparmor 1 --klog-check --timeout 60s
Without this patch the three refcount_t warnings fire within a
few seconds. With it the same 60 s run is clean. Coverage is a
smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN
and CONFIG_PROVE_LOCKING would be welcome from anyone with the
cycles. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, an XML external entity reference vulnerability in SVG image processing allows an unauthenticated attacker to read local files on the server via a crafted SVG image with a nested embedded SVG, when the image is processed or exported to PDF. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, a path traversal vulnerability in the Convert and Merge AI agent tools allows an authenticated attacker with low privileges who can supply tool arguments to read files outside the configured output directory, and to overwrite such files where they are writable, via relative file paths that resolve against the process current working directory. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in rt6_fill_node()
Sashiko reported this issue [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)
without waiting for RCU readers; rt->fib6_siblings.next then still
points into the old ring and this softirq-side walker never reaches
&rt->fib6_siblings, causing a CPU stall. fib6_del_route() always
WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an
inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, unchecked loop condition and inefficient regular expression vulnerabilities in RadSpreadProcessing and RadSpreadStreamProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted XLSX or XLS workbook or formula. |
| A remote command injection vulnerability exists in the Barracuda Load Balancer product line (confirmed on v5.4.0.004 (2015-11-26) and v6.0.1.006 (2016-08-19); fixed in 6.1.0.003 (2017-01-17)) in which an authenticated user can execute arbitrary shell commands and gain root privileges. The vulnerability stems from unsanitized data being processed in a system call when the delete_assessment command is issued. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, inefficient algorithmic complexity and resource allocation vulnerabilities in RadPdfProcessing and AI document summarization and question answering allow an unauthenticated attacker to terminate or hang the host process via a crafted PDF document or document text submitted for summarization or question answering. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, inefficient algorithmic complexity and infinite loop vulnerabilities in RadWordsProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted DOCX, DOC, RTF or HTML document. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: fix use-after-free in store_modes()
store_modes() replaces a framebuffer's modelist with modes from userspace.
On success it frees the old modelist with fb_destroy_modelist(). Two
fields still point into that freed list.
One pointer is fb_display[i].mode, the mode a console is using.
fbcon_new_modelist() moves these pointers to the new list. It only does so
for consoles still mapped to the framebuffer. An unmapped console is
skipped and keeps its stale pointer. Unbinding fbcon, for example, sets
con2fb_map[i] to -1 but leaves fb_display[i].mode set. An
FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches
fbcon_mode_deleted(). That function reads the stale fb_display[i].mode
through fb_mode_is_equal(). The read is a use-after-free.
The other pointer is fb_info->mode, the current mode. It is set through
the mode sysfs attribute. store_modes() does not update fb_info->mode, so
it is left pointing into the freed list. show_mode(), the attribute's read
handler, dereferences the stale fb_info->mode through mode_string(). The
read is a use-after-free.
Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon:
Set fb_display[i]->mode to NULL when the mode is released") added the
helper fbcon_delete_modelist(). It clears every fb_display[i].mode that
points into a given list. So far it is called only from the unregister
path. Call it from store_modes() too, and set fb_info->mode to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix warning when unbinding
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath11k_pci),
and we get:
WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90
Call Trace:
free_large_kmalloc
ath11k_dp_free
ath11k_core_deinit
ath11k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in CodeRockz Delivery & Pickup Date Time for WooCommerce woo-delivery allows Stored XSS.This issue affects Delivery & Pickup Date Time for WooCommerce: from n/a through 1.3.90. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: usb: fix memory leaks on USB write failures
When rtw_usb_write_port() fails to submit a USB Request Block (URB)
(e.g., due to device disconnect or ENOMEM), the completion callback is
never executed.
Currently, the driver ignores the return value of rtw_usb_write_port()
in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these
functions rely on the completion callback to free the socket buffers
(skbs) and the transaction control block (txcb), a submission failure
results in:
1. A memory leak of the allocated skb in rtw_usb_write_data().
2. A memory leak of the txcb structure and all aggregated skbs in
rtw_usb_tx_agg_skb().
Fix this by checking the return value of rtw_usb_write_port(). If it
fails, explicitly free the skb in rtw_usb_write_data(), and properly
purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb().
The issue was discovered in practice during device disconnect/reconnect
scenarios and memory pressure conditions. Tested by verifying normal TX
operation continues after the fix without regressions. |
| In JetBrains IntelliJ IDEA before 2026.2.2 terminal command input could be written to idea.log |