| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The salt.auth.pki module does not properly authenticate callers. The "password" field contains a public certificate which is validated against a CA certificate by the module. This is not pki authentication, as the caller does not need access to the corresponding private key for the authentication attempt to be accepted. |
| CryptX for Perl before version 0.065 contains a dependency that may be susceptible to malformed unicode.
CryptX embeds the tomcrypt library. The versions of that library in CryptX before 0.065 may be susceptible to CVE-2019-17362. |
| Net::Dropbear versions through 0.16 for Perl contains a dependency that may be susceptible to an integer overflow.
Net::Dropbear embeds a version of the libtommath library that is susceptible to an integer overflow associated with CVE-2023-36328. |
| Perl CryptX before version 0.087 contains a dependency that may be susceptible to an integer overflow.
CryptX embeds a version of the libtommath library that is susceptible to an integer overflow associated with CVE-2023-36328. |
| CGI::Simple versions before 1.282 for Perl has a HTTP response splitting flaw
This vulnerability is a confirmed HTTP response splitting flaw in CGI::Simple that allows HTTP response header injection, which can be used for reflected XSS or open redirect under certain conditions.
Although some validation exists, it can be bypassed using URL-encoded values, allowing an attacker to inject untrusted content into the response via query parameters.
As a result, an attacker can inject a line break (e.g. %0A) into the parameter value, causing the server to split the HTTP response and inject arbitrary headers or even an HTML/JavaScript body, leading to reflected cross-site scripting (XSS), open redirect or other attacks.
The issue documented in CVE-2010-4410 https://www.cve.org/CVERecord?id=CVE-2010-4410 is related but the fix was incomplete.
Impact
By injecting %0A (newline) into a query string parameter, an attacker can:
* Break the current HTTP header
* Inject a new header or entire body
* Deliver a script payload that is reflected in the server’s response
That can lead to the following attacks:
* reflected XSS
* open redirect
* cache poisoning
* header manipulation |
| JSON::XS before version 4.04 for Perl has an integer buffer overflow causing a segfault when parsing crafted JSON, enabling denial-of-service attacks or other unspecified impact |
| Mautic uses predictable page indices for unpublished landing pages, their content can be accessed by unauthenticated users under public preview URLs which could expose sensitive data. At the time of publication of the CVE no patch is available
|
| Cpanel::JSON::XS before version 4.40 for Perl has an integer buffer overflow causing a segfault when parsing crafted JSON, enabling denial-of-service attacks or other unspecified impact |
| JSON::SIMD before version 1.07 and earlier for Perl has an integer buffer overflow causing a segfault when parsing crafted JSON, enabling denial-of-service attacks or other unspecified impact. |
| A vulnerability has been identified in SIMATIC ET 200AL IM 157-1 PN (6ES7157-1AB00-0AB0) (All versions), SIMATIC ET 200MP IM 155-5 PN HF (6ES7155-5AA00-0AC0) (All versions >= V4.2.0), SIMATIC ET 200SP IM 155-6 MF HF (6ES7155-6MU00-0CN0) (All versions), SIMATIC ET 200SP IM 155-6 PN HA (incl. SIPLUS variants) (All versions < V1.3), SIMATIC ET 200SP IM 155-6 PN R1 (6ES7155-6AU00-0HM0) (All versions < V6.0.1), SIMATIC ET 200SP IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0) (All versions >= V4.2.0), SIMATIC ET 200SP IM 155-6 PN/3 HF (6ES7155-6AU30-0CN0) (All versions < V4.2.2), SIMATIC PN/MF Coupler (6ES7158-3MU10-0XA0) (All versions), SIMATIC PN/PN Coupler (6ES7158-3AD10-0XA0) (All versions < V6.0.0), SIPLUS ET 200MP IM 155-5 PN HF (6AG1155-5AA00-2AC0) (All versions >= V4.2.0), SIPLUS ET 200MP IM 155-5 PN HF (6AG1155-5AA00-7AC0) (All versions >= V4.2.0), SIPLUS ET 200MP IM 155-5 PN HF T1 RAIL (6AG2155-5AA00-1AC0) (All versions >= V4.2.0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU01-2CN0) (All versions >= V4.2.0), SIPLUS ET 200SP IM 155-6 PN HF (6AG1155-6AU01-7CN0) (All versions >= V4.2.0), SIPLUS ET 200SP IM 155-6 PN HF T1 RAIL (6AG2155-6AU01-1CN0) (All versions >= V4.2.0), SIPLUS ET 200SP IM 155-6 PN HF TX RAIL (6AG2155-6AU01-4CN0) (All versions >= V4.2.0), SIPLUS NET PN/PN Coupler (6AG2158-3AD10-4XA0) (All versions < V6.0.0). Affected devices do not properly handle S7 protocol session disconnect requests. When receiving a valid S7 protocol Disconnect Request (COTP DR TPDU) on TCP port 102, the devices enter an improper session state.
This could allow an attacker to cause the device to become unresponsive, leading to a denial-of-service condition that requires a power cycle to restore normal operation. |
| A vulnerability has been identified in Perfect Harmony GH180 (All versions >= V8.0 < V8.3.3 with NXGPro+ controller manufactured between April 2020 to April 2025). The maintenance connection of affected devices fails to protect access to the device's control unit configuration. This could allow an attacker with physical access to the maintenance connection's door port to perform arbitrary configuration changes. |
| Stored Cross-Site Scripting (XSS) vulnerability in WorkDo's HRMGo, consisting of a lack of proper validation of user input by sending a POST request to ‘/hrmgo/ticket/changereply’, using the ‘description’ parameter. |
| Insertion of Sensitive Information Into Sent Data vulnerability in shinetheme Traveler Option Tree custom-option-tree allows Retrieve Embedded Sensitive Data.This issue affects Traveler Option Tree: from n/a through <= 2.8. |
| DLL search order hijacking vulnerability in the wave.exe executable for Windows 11, version 1.27.8. Exploitation of this vulnerability could allow attackers with local access to execute arbitrary code by placing an arbitrary file in the 'C:\Users<user>\AppData\Local\Temp' directory, which could lead to arbitrary code execution and persistence. This vulnerability is only replicable in versions of Windows 11 and does not affect earlier versions. |
| SIMPLE.ERP client is vulnerable to MS SQL protocol downgrade request from a server side, what could lead to an unencrypted communication vulnerable to data interception and modification.
This issue affect SIMPLE.ERP from 6.20 to 6.30. Only the 6.30 version received a patch 6.30@a03.9, which make it possible for an administrator to enforce encrypted communication. Versions 6.20 and 6.25 remain unpatched. |
| The Honeywell Experion PKS contains an Integer Underflow
vulnerability
in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to
Input Data Manipulation, which could result in improper integer data value checking during subtraction leading to a denial of service.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3. |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in jetmonsters Restaurant Menu by MotoPress mp-restaurant-menu allows Retrieve Embedded Sensitive Data.This issue affects Restaurant Menu by MotoPress: from n/a through <= 2.4.7. |
| Cross-Frame Scripting (XFS) vulnerability in BoomCMS v9.1.4 from UXB London. XFS is a web attack technique that exploits specific browser bugs to spy on users via JavaScript. This type of attack is based on social engineering and depends entirely on the browser chosen by the user, so it is perceived as a minor threat to web application security. This vulnerability only works in older browsers. |
| Imaster's Patient Records Management System is vulnerable to SQL Injection in the endpoint ‘/projects/hospital/admin/complaints.php’ through the ‘id’ parameter. |
| SQL injection vulnerability in the DRED virtual campus platform. This vulnerability allows an attacker to retrieve, create, update, and delete data from the database by sending a POST request using the ‘buscame’ parameter in ‘/catalogo_c/catalogo.php’. |
