| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 was discovered to manage users' sessions system wide instead of an account-by-account basis, potentially leading to a Denial of Service (DoS) via resource exhaustion. NOTE: the Supplier reports that the system-wide limit is intentional. |
| masterstack_imgcap v0.0.1 was discovered to contain a SQL injection vulnerability via the endpoint /submit. |
| An issue in Sublime HQ Pty Ltd Sublime Text 4 4200 allows authenticated attackers with low-level privileges to escalate privileges to Administrator via replacing the uninstall file with a crafted binary in the installation folder. NOTE: this is disputed by the Supplier because replacing the uninstall file requires administrator permissions, i.e., there is no privilege escalation. |
| System logs could be accessed through web management application due to a lack of access control.
An attacker can obtain the following sensitive information:
• Wi-Fi access point credentials to which the EV charger can connect.
• APN web address and credentials.
• IPSEC credentials.
• Web interface access credentials for user and admin accounts.
• JuiceBox system components (software installed, model, firmware version, etc.).
• C2G configuration details.
• Internal IP addresses.
• OTA firmware update configurations (DNS servers).
All the credentials are stored in logs in an unencrypted plaintext format. |
| A flaw has been found in SEAT Queue Ticket Kiosk up to 20250827. This affects an unknown part of the component Java RMI Registry Handler. This manipulation causes deserialization. The attack can only be done within the local network. The attack is considered to have high complexity. It is indicated that the exploitability is difficult. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper access control in BMC Firmware for the Intel(R) Server Board S2600WF, Intel(R) Server Board S2600ST, Intel(R) Server Board S2600BP, before version 02.01.0017 and Intel(R) Server Board M50CYP and Intel(R) Server Board D50TNP before version R01.01.0009 may allow an authenticated user to enable escalation of privilege via local access. |
| XWiki Remote Macros provides XWiki rendering macros that are useful when migrating content from Confluence. Starting in version 1.0 and prior to version 1.26.5, missing escaping of the ac:type in the ConfluenceLayoutSection macro allows remote code execution for any user who can edit any page The classes parameter is used without escaping in XWiki syntax, thus allowing XWiki syntax injection which enables remote code execution. Version 1.26.5 has a fix for the issue. |
| api is a module for FreePBX@, which is an open source GUI that controls and manages Asterisk© (PBX). In versions lower than 15.0.13, 16.0.2 through 16.0.14, 17.0.1 and 17.0.2, there is an identical OAuth private key used across multiple systems that installed the same FreePBX RPM or DEB package. An attacker with access to the shared OAuth private key could forge JWT tokens, bypass authentication, and potentially gain full access to both REST and GraphQL APIs. Systems with the "api" module enabled, configured and previously activated by an administrator for remote inbound connections may be affected. This issue is fixed in versions 15.0.13, 16.0.15 and 17.0.3. |
| nginx-defender is a high-performance, enterprise-grade Web Application Firewall (WAF) and threat detection system engineered for modern web infrastructure. This is a configuration vulnerability affecting nginx-defender deployments. Example configuration files
config.yaml and docker-compose.yml contain default credentials (default_password: "change_me_please", GF_SECURITY_ADMIN_PASSWORD=admin123). If users deploy nginx-defender without changing these defaults, attackers with network access could gain administrative control, bypassing security protections. The issue is addressed in v1.5.0 and later. |
| File upload leading to remote code execution (RCE) in the “melis-cms-slider” module of Melis Technology's Melis Platform. This vulnerability allows an attacker to upload a malicious file via a POST request to '/melis/MelisCmsSlider/MelisCmsSliderDetails/saveDetailsForm' using the 'mcsdetail_img' parameter. |
| A flaw was found in Keycloak. The Keycloak guides recommend to not expose /admin path to the outside in case the installation is using a proxy. The issue occurs at least via ha-proxy, as it can be tricked to using relative/non-normalized paths to access the /admin application path relative to /realms which is expected to be exposed. |
| Gitpod is a developer platform for cloud development environments. In versions before main-gha.33628 for both Gitpod Classic and Gitpod Classic Enterprise, OAuth integration with Bitbucket in certain conditions allowed a crafted link to expose a valid Bitbucket access token via the URL fragment when clicked by an authenticated user. This resulted from how Bitbucket returned tokens and how Gitpod handled the redirect flow. The issue was limited to Bitbucket (GitHub and GitLab integrations were not affected), required user interaction, and has been mitigated through redirect handling and OAuth logic hardening. The issue was resolved in main-gha.33628 and later. There are no workarounds. |
| A unauthenticated reflected XSS vulnerability in VirtueMart 1.0.0-4.4.10 for Joomla was discovered. |
| Missing Authorization vulnerability in YMC Filter & Grids allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Filter & Grids: from n/a through 2.8.33. |
| gurk (aka gurk-rs) through 0.6.3 mishandles ANSI escape sequences. |
| Improper Authentication vulnerability in WF Steuerungstechnik GmbH airleader MASTER allows Authentication Bypass.This issue affects airleader MASTER: 3.00571. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_router: Fix neighbour use-after-free
We sometimes observe use-after-free when dereferencing a neighbour [1].
The problem seems to be that the driver stores a pointer to the
neighbour, but without holding a reference on it. A reference is only
taken when the neighbour is used by a nexthop.
Fix by simplifying the reference counting scheme. Always take a
reference when storing a neighbour pointer in a neighbour entry. Avoid
taking a referencing when the neighbour is used by a nexthop as the
neighbour entry associated with the nexthop already holds a reference.
Tested by running the test that uncovered the problem over 300 times.
Without this patch the problem was reproduced after a handful of
iterations.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x2d4/0x310
Read of size 8 at addr ffff88817f8e3420 by task ip/3929
CPU: 3 UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full)
Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6e/0x300
print_report+0xfc/0x1fb
kasan_report+0xe4/0x110
mlxsw_sp_neigh_entry_update+0x2d4/0x310
mlxsw_sp_router_rif_gone_sync+0x35f/0x510
mlxsw_sp_rif_destroy+0x1ea/0x730
mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0
__mlxsw_sp_inetaddr_lag_event+0xcc/0x130
__mlxsw_sp_inetaddr_event+0xf5/0x3c0
mlxsw_sp_router_netdevice_event+0x1015/0x1580
notifier_call_chain+0xcc/0x150
call_netdevice_notifiers_info+0x7e/0x100
__netdev_upper_dev_unlink+0x10b/0x210
netdev_upper_dev_unlink+0x79/0xa0
vrf_del_slave+0x18/0x50
do_set_master+0x146/0x7d0
do_setlink.isra.0+0x9a0/0x2880
rtnl_newlink+0x637/0xb20
rtnetlink_rcv_msg+0x6fe/0xb90
netlink_rcv_skb+0x123/0x380
netlink_unicast+0x4a3/0x770
netlink_sendmsg+0x75b/0xc90
__sock_sendmsg+0xbe/0x160
____sys_sendmsg+0x5b2/0x7d0
___sys_sendmsg+0xfd/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0xfd0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[...]
Allocated by task 109:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7b/0x90
__kmalloc_noprof+0x2c1/0x790
neigh_alloc+0x6af/0x8f0
___neigh_create+0x63/0xe90
mlxsw_sp_nexthop_neigh_init+0x430/0x7e0
mlxsw_sp_nexthop_type_init+0x212/0x960
mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280
mlxsw_sp_nexthop6_group_get+0x392/0x6a0
mlxsw_sp_fib6_entry_create+0x46a/0xfd0
mlxsw_sp_router_fib6_replace+0x1ed/0x5f0
mlxsw_sp_router_fib6_event_work+0x10a/0x2a0
process_one_work+0xd57/0x1390
worker_thread+0x4d6/0xd40
kthread+0x355/0x5b0
ret_from_fork+0x1d4/0x270
ret_from_fork_asm+0x11/0x20
Freed by task 154:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kmem_cache_free_bulk.part.0+0x1eb/0x5e0
kvfree_rcu_bulk+0x1f2/0x260
kfree_rcu_work+0x130/0x1b0
process_one_work+0xd57/0x1390
worker_thread+0x4d6/0xd40
kthread+0x355/0x5b0
ret_from_fork+0x1d4/0x270
ret_from_fork_asm+0x11/0x20
Last potentially related work creation:
kasan_save_stack+0x30/0x50
kasan_record_aux_stack+0x8c/0xa0
kvfree_call_rcu+0x93/0x5b0
mlxsw_sp_router_neigh_event_work+0x67d/0x860
process_one_work+0xd57/0x1390
worker_thread+0x4d6/0xd40
kthread+0x355/0x5b0
ret_from_fork+0x1d4/0x270
ret_from_fork_asm+0x11/0x20 |
| Out-of-bounds read in UEFI firmware for some Intel(R) Processors may allow a privileged user to potentially enable denial of service via local access. |
| O2 UK before 2025-05-19 allows subscribers to determine the Cell ID of other subscribers by initiating an IMS (IP Multimedia Subsystem) call and then reading the utran-cell-id-3gpp field of a Cellular-Network-Info SIP header, aka an ECI (E-UTRAN Cell Identity) leak. The Cell ID might be usable to identify a cell location via crowdsourced data, and might correspond to a small physical area (e.g., if the called party is in a city centre). Removal of the Cellular-Network-Info header is mentioned in section 4.4.19 of ETSI TS 124 229. |
| Openindiana, kernel SunOS 5.11 has a denial of service vulnerability. For the processing of TCP packets with RST or SYN flag set, Openindiana has a wide acceptable range of sequence numbers. It does not require the sequence number to exactly match the next expected sequence value, just to be within the current receive window, which violates RFC5961. This flaw allows attackers to send multiple random TCP RST/SYN packets to hit the acceptable range of sequence numbers, thereby interrupting normal connections and causing a denial of service attack. |
