| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Windows Client License Service allows an authorized attacker to elevate privileges locally. |
| Improper privilege management in Windows Group Policy allows an authorized attacker to elevate privileges locally. |
| Access of resource using incompatible type ('type confusion') in RPC Runtime allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Windows Portable Device MTP Driver allows an unauthorized attacker to elevate privileges with a physical attack. |
| Heap-based buffer overflow in Windows Universal Disk Format File System Driver (UDFS) allows an authorized attacker to elevate privileges locally. |
| No cwe for this issue in Windows Secure Boot allows an authorized attacker to bypass a security feature locally. |
| Improper resolution of path equivalence in WebDAV allows an authorized attacker to elevate privileges over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mtk-sd: Cancel request timeout work on remove
The driver queues req_timeout while a request is active.
msdc_request_done() uses cancel_delayed_work(), which does not wait for
a timeout callback that has already started.
The timeout callback calls mmc_request_done(), which wakes the request
waiter, and then continues to use host->dev_comp and check the SDIO IRQ.
During unbind, msdc_drv_remove() can return and the managed mmc_host can
be freed before the callback finishes.
KASAN reported use-after-free accesses in msdc_request_done() and
msdc_recheck_sdio_irq() in each of three unbind tests. The same tests
completed without a kernel diagnostic after this change.
Call cancel_delayed_work_sync() after mmc_remove_host() has stopped new
requests and before the driver releases the host resources. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix reading free memory in do_resume
When do_resume calls dm_table_get_mode(new_map), the call is done without
holding any locks (it only holds a reference to the md). It may be
possible that another concurrent ioctl on the same device will swap table
after dm_swap_table and before dm_table_get_mode. In this case,
dm_table_get_mode(new_map) reads freed memory.
This race condition was triggered by syzbot.
This commit fixes the race by reading mode of the new table before
dm_swap_table. Note that new_map is also passed to dm_ima_need_measure,
but this function doesn't attempt to dereference it, so this call should
be safe.
Note that this is not a security bug because only root can trigger it and
the commonly used tools such as lvm or cryptsetup do not call the ioctls
concurrently, so that they can't trigger it acceidentally. |
| XDG Desktop Portal is a desktop integration portal. Prior to version 1.22.1, malicious sandboxed applications can use the FileChooser.SaveFiles method to gain arbitrary file access to non-existing files on the host (limited to files the user has access to). The FileChooser.SaveFiles method takes optional filenames which get appended to the selected directory by backends. The backends are supposed to check that the file does not exist yet. The filenames are not validated by the frontend and also not by common backends. This issue has been patched in version 1.22.1. |
| Improper link resolution before file access ('link following') in Windows Update allows an authorized attacker to elevate privileges locally. |
| Improper neutralization of special elements used in a command ('command injection') in Windows Update allows an authorized attacker to elevate privileges locally. |
| Untrusted search path in Windows Update allows an authorized attacker to elevate privileges locally. |
| Double free in Windows Kerberos allows an authorized attacker to elevate privileges locally. |
| Improper link resolution before file access ('link following') in Windows Backup Engine allows an authorized attacker to elevate privileges locally. |
| A security flaw has been discovered in Tenda F6 12.02.01.73. This impacts an unknown function of the component Web Management Interface. Performing a manipulation results in cross-site request forgery. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h
get_align_mask() returns huge_page_mask_align() for hugetlbfs, but get_align_bits()
adds va_align.bits regardless, so vm_unmapped_area() returns an address off the huge
page boundary and __unmap_hugepage_range() hits BUG_ON(start & ~huge_page_mask(h)) at
teardown.
This can be triggered on Carrizo and FX-8370E, both hstates.
Pass the file to get_align_bits() and skip the randomisation for hugetlbfs.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Lock parent access during enhanced SCO setup
Bluetooth: hci_conn: Lock parent access during enhanced SCO setup
hci_enhanced_setup_sync() runs on the request workqueue without the
hci_dev_lock held by its caller when setup was queued. Its CVSD
capability check and find_next_esco_param() dereference conn->parent
while the receive workqueue can unlink and release that parent.
The following interleaving can cause a use-after-free:
hci_enhanced_setup_sync() hci_disconn_complete_evt()
load conn->parent
hci_dev_lock()
hci_conn_del(ACL parent)
unlink SCO child
drop link's parent reference
clear child->parent
release ACL parent
bt_link_release()
kfree(parent)
hci_dev_unlock()
read parent->features[0][3]
The reference held for the queued SCO child does not keep its ACL parent
alive after unlinking. Commit 42de40abe25d ("Bluetooth: hci_conn: fix the
SCO setup context lifetime") protects the child stored in the queued
context, but leaves these parent accesses unprotected.
With a 40 ms diagnostic delay after loading conn->parent, an instrumented
kernel based on fd179f8a05be, which already contains 42de40abe25d,
BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0xda5/0xdf0
Read of size 1 at addr ffff888102204047 by task kworker/u17:0/93
Call Trace:
hci_enhanced_setup_sync+0xda5/0xdf0
hci_cmd_sync_work+0x13c/0x290
process_one_work+0x6b4/0x10e0
Allocated by task 92:
__hci_conn_add+0x304/0x1df0
hci_connect_acl+0x349/0x3e0
hci_connect_sco+0x3b/0x9a0
sco_sock_connect+0x475/0xca0
Freed by task 94:
kfree+0x121/0x3c0
bt_link_release+0x79/0xa0
device_release+0xc8/0x240
kobject_put+0x14d/0x280
hci_conn_del+0x524/0xe30
hci_disconn_complete_evt+0x403/0x8c0
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
The accessed address is 71 bytes into the freed ACL parent, at its
features[0][3] byte; the queued SCO child is a different object. The
diagnostic preserves the loaded parent across the delay, matching the
unmodified compiled capability check, and does not change the parent
references or teardown path.
Hold hci_dev_lock() across the codec switch, including every call to
find_next_esco_param(), and release it on all selection errors. Keep
configure_datapath_sync() outside the critical section because it waits
for HCI events. Preserve parameter selection and existing return values. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix initial port reference race
For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and
__rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the
initial tty_port reference. The release path tests the bit separately
from the install path setting it, so both can drop that reference.
The synchronous hangup does not prevent this race: port->tty is not
assigned until tty_port_open(), after installation. The following
interleaving is possible:
1. Install and release each obtain a reference with rfcomm_dev_get().
2. Release observes RFCOMM_TTY_OWNED clear.
3. Install sets RFCOMM_TTY_OWNED and drops the initial reference.
4. Release drops the same initial reference again.
5. TTY cleanup drops its reference and frees the device.
6. Release performs its final tty_port_put() on the freed port.
KASAN reported:
BUG: KASAN: slab-use-after-free in tty_port_put+0x22/0x190
Write of size 4 at addr ffff8881001d3d5c by task poc/92
Call Trace:
tty_port_put+0x22/0x190
rfcomm_dev_ioctl+0x1d4/0x1930
sock_do_ioctl+0x110/0x260
sock_ioctl+0x380/0x590
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 88:
rfcomm_dev_ioctl+0x8f6/0x1930
sock_do_ioctl+0x110/0x260
sock_ioctl+0x380/0x590
__x64_sys_ioctl+0x134/0x1c0
Freed by task 65:
kfree+0x131/0x3c0
rfcomm_dev_destruct+0x23b/0x2f0
release_one_tty+0xc1/0x370
process_one_work+0x661/0x1090
Use test_and_set_bit() in both paths so that only the caller that changes
RFCOMM_TTY_OWNED from clear to set drops the initial reference. Each path
keeps its own lookup reference until release or TTY cleanup, preserving
the existing callback ordering and error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/altera: Drop __init from ECC setup paths for re-probe safety
Sashiko reports:
"Does suppressing sysfs unbinding fully prevent the execution of freed __init
memory? If altr_sysmgr_regmap_lookup_by_phandle() returns -EPROBE_DEFER, the
probe is deferred until after __init memory is freed."
The a10 EDAC .setup callbacks (sdmmc, ethernet, nand, dma, usb, qspi) and
their helpers (altr_init_a10_ecc_device_type, altr_init_a10_ecc_block) were
marked __init. These run from the probe path, which may execute after init
memory is freed -- e.g. a probe deferred via -EPROBE_DEFER that only succeeds
once a late/module dependency appears, or a manual unbind/rebind. Calling
__init code then dereferences freed memory. Remove __init so these functions
remain valid at runtime. |
