| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Use of Multiple Resources with Duplicate Identifier vulnerability in the IKE daemon (iked) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
On an MX with SPC3 and SRX devices configured for VPN service, when a large number of VPN negotiations fail a peer index rollover will eventually occur. As a result, new peers are assigned index values that are already in use and the iked process starts to crash repeatedly. This results in failure to establish new VPN connections and rekeying existing ones. To restore service the system must be rebooted.
Please note that the index value can't be monitored, so customers should monitor tunnel up and down events and if a lot of events occur over an extended period of time it becomes likely that this issue occurs.
To be exposed to this issue the system needs to run iked (vs. kmd which is not affected), which can be verified with:
user@host> show system processes extensive | match "KMD|IKED"
This issue affects Junos OS on MX with SPC3, SRX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R1-S1. |
| A Return of Pointer Value Outside of Expected Range vulnerability in the fileio library of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privilged attacker to cause a Denial-of-Service (DoS).
On EX Series, QFX Series and MX Series a low-privileged attacker issuing a specific 'show l2-learning' command will cause an l2ald crash which will lead to a temporary service impact for all layer 2 services until the process has automatically restarted.
This issue affects EX Series, QFX Series, MX Series:
Junos OS:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2,
* 24.4 versions before 24.4R1-S2.
Junos OS Evolved:
* all versions before 23.2R2-S7-EVO,
* 23.4 versions before 23.4R2-S8-EVO,
* 24.2 versions before 24.2R2-EVO,
* 24.4 versions before 24.4R1-S3-EVO. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the SIP plugin of Juniper Networks Junos OS on MX Series with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).If the SIP ALG is enabled on an affected device, the processing of a malformed SIP invite packet will cause a flow processing daemon (flowd) crash and restart. This leads to a complete service outage until the system has automatically recovered.
This issue affects Junos OS on MX Series with SPC3 and SRX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S5,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2,
* 25.4 versions before 25.4R1-S2. |
| An Improper Restriction of Communication Channel to Intended Endpoints vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause license exhaustion.
Due to an incorrect initialization, a process which should only be able to communicate internally within the device, can be reached over the network via an open port. This leads to unauthorized access to the license management.
This issue affects all Junos OS Evolved versions before 23.2R2-EVO. |
| A Missing Synchronization vulnerability in the flow collector handler of Juniper Networks Junos OS Evolved on QFX Series allows an adjacent, unauthenticated attacker to cause a Denial-of-Service (DoS).
When the reachability of an sFlow collector changes, the corresponding next-hop entry is updated. If this update occurs simultaneously with the sFlow thread accessing the next-hop data (which is outside the attackers control), it causes the evo-pfemand process to crash, impacting all traffic forwarding until the automatic process restart has completed.
This issue affects Junos OS Evolved on QFX Series:
* all 23.2 versions,
* 23.4 versions before 23.4R2-S7-EVO,
* 24.2 versions before 24.2R2-S5-EVO,
* 24.4 versions before 24.4R2-S3-EVO,
* 25.2 versions before 25.2R2-EVO. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on MX Series allows adjacent subscribers to bypass configured firewall filters.
On MX Series devices with MPC10/11, LC4800/9600, and MX304 with subscribers configured on static interfaces, ingress firewall filters are not enforced, so that neither protocol level nor upstream bandwidth limitation are in effect.
This issue affects Junos OS on MX with MPC10/11, LC4800/9600/4802, and MX304:
* 23.2 versions from 23.2R2-S1 before 23.2R2-S7,
* 23.4 versions from 23.4R2 before 23.4R2-S7,
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S2,
* 25.2 versions before 25.2R2. |
| Hermes WebUI before 0.51.788 contains an unauthenticated remote code execution vulnerability that allows remote attackers to execute arbitrary shell commands by accessing the embedded terminal API endpoints without credentials. Attackers can create a session, attach a PTY shell, and write arbitrary commands through the terminal input endpoint to achieve full command execution as the server process user via four sequential unauthenticated HTTP requests. |
| An Improper Handling of Undefined Parameters vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on EX Series devices allows an authenticated attacker with low privileges to cause a Denial-of-Service (DoS).
If an attempt is made to subscribe to an unsupported telemetry sensor path on EX2300, EX3400, EX4000, EX4100 and EX4400 via gRPC, this causes the FPC to crash. This leads to a complete service outage until the module has automatically restarted.
The following log message can be seen when this issue happens:
agentd[<PID>]: AGENTD_RESOURCE_NOT_FOUND: No resource name found for <sensor>
This issue affects Junos OS on
EX2300, EX3400, EX4000, EX4100 and EX4400
devices:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S5,
* 24.4 versions before 24.4R2. |
| A Use of Incorrectly-Resolved Name or Reference vulnerability in the URL filtering plugin of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass web filtering and access downstream resources that should be unreachable.
If an MX Series device is configured with web filtering, and an attacker sends a request with a specifically formatted URL, this request will get forwarded despite the system being configured to block it. In turn, an attacker can access downstream resources that are expected to be unreachable.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S5,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2-S1,
* 25.4 versions before 25.4R1-S2, 25.4R2. |
| Hermes WebUI before 0.51.307 contains an authentication bypass vulnerability that allows unauthenticated remote attackers to circumvent local-origin IP restrictions on onboarding endpoints by supplying a spoofed X-Forwarded-For header with a loopback address. Attackers can exploit this bypass to perform server-side request forgery against internal services including cloud metadata endpoints, overwrite LLM provider configuration and API keys with attacker-controlled values, or initiate OAuth device-code flows to obtain persistent access tokens stored in auth.json. |
| Vim is an open source, command line text editor. Prior to 9.2.0725, the single-byte branch of spell_soundfold_sal() in src/spell.c translates a word through a spell file's SAL sound-folding rules into a caller-owned result buffer, but its result writes are guarded with reslen < MAXWLEN, allowing reslen to reach MAXWLEN before res[reslen] = NUL writes one byte past the end of the MAXWLEN-element stack buffer. A boundary-length word passed to soundfold(), or reached via sound-based spell suggestion while a SAL-based spell language is active under a non-multibyte 8-bit encoding, can corrupt the eval_soundfold() stack frame and crash the editor. This issue is fixed in version 9.2.0725. |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 0.12.0-alpha.1, the email and WeChat account binding endpoints GET /api/oauth/email/bind and GET /api/oauth/wechat/bind used GET requests for state-changing account operations, allowing an attacker to trigger a logged-in user's browser to bind an attacker-controlled email address or OAuth identity in deployments where session cookies could be sent on cross-site navigations. This issue is fixed in version 0.12.0-alpha.1. |
| In checkSsrcCollisionOnRcv of RtpSession.cpp, there is a possible memory safety issue due to a missing null check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| decompress before 4.2.2 allows arbitrary hardlink creation during archive extraction, enabling file read disclosure and file corruption. When processing hardlink entries (type === 'link'), the x.linkname field from the archive is passed directly to fs.link() without validation (index.js line 113). An attacker can craft an archive with a hardlink entry whose linkname is an absolute path to any file on the same filesystem. This creates a hardlink inside the extraction directory that shares the same inode as the target file, enabling both reading and overwriting the original file's content. Hardlinks are limited to files on the same filesystem and cannot target directories. |
| decompress before 4.2.2 contains an improper path containment check that enables directory traversal and arbitrary file write. The safeMakeDir function (index.js line 29) and the extraction path validation (index.js line 106) use String.indexOf() to verify the resolved path is within the output directory: realDestinationDir.indexOf(realOutputPath) !== 0. This check is flawed because it does not enforce a path separator boundary. For example, "/tmp/app_config".indexOf("/tmp/app") returns 0, incorrectly passing the check even though /tmp/app_config is outside /tmp/app. Combined with the unvalidated symlink creation in the same package, an attacker can write arbitrary files to directories adjacent to the extraction target. This is a bypass of the fix for CVE-2020-12265. The correct check requires appending a path separator: realParentPath.indexOf(realOutputPath + path.sep) !== 0. |
| decompress before 4.2.2 allows arbitrary symlink creation during archive extraction. When processing symlink entries (type === 'symlink'), the x.linkname field from the archive is passed directly to fs.symlink() without validation (index.js line 121). The preventWritingThroughSymlink check on line 98 only applies to file entries, not symlink creation. An attacker can craft an archive with symlink entries pointing to sensitive files outside the extraction directory (e.g., /etc/passwd), enabling information disclosure when the application reads the extracted contents. |
| An Improper Restriction of Communication Channel to Intended Endpoints vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a limited information disclosure and availability impact to the device.
Due to a wrong initialization, a process which should only be able to communicate internally within the device can be reached over the network via an open port. This leads to a device being inadvertently exposed and increased CPU cycles spent processing ingress packets.
This issue affects Junos OS Evolved:
* all versions before 23.2R2-S7-EVO,
* 23.4 versions before 23.4R2-S8-EVO,
* 24.2 versions before 24.2R2-S5-EVO,
* 24.4 versions before 24.4R2-S4-EVO,
* 25.2 versions before 25.2R2-S1-EVO,
* 25.4 versions before 25.4R1-S2-EVO. |
| OpenFGA is an authorization/permission engine built for developers. Prior to 1.18.0, when MySQL is being used as the datastore and authorization decisions rely on case-sensitive user strings, the tuple, changelog, and authorization_model identifier columns can compare case-distinct values such as user:Alice and user:alice as equivalent, causing two distinct check requests to return the same response. This issue is fixed in 1.18.0. |
| An Improper Validation of Specified Quantity in Input vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).
When a specific packet is received from device in the same broadcast domain, an affected system calculates the packet size incorrectly. This causes further packet processing to fail, which triggers an FPC major error, resulting in a FPC reset impacting traffic until the FPC has automatically recovered.
Affected scenarios are: MAP-T, or non-IP traffic encapsulated in IP (e.g. MPLS over GRE).
When this issue happens the following logs can be observed:
fpc<#> CMError: /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb), scope: pfe, category: functional, severity: major, module: MQSS(0), type: LI: Unroll TAIL length overflow, oc_category: default
fpc<#> Performing action reset-fru for error /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb) in module: MQSS(0) with scope: pfe category: functional level: major, oc_category: default
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on QFX10000 Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).
On all QFX10000 platforms in an EVPN-VxLAN scenario, if an attacker sends IPv6 multicast traffic and these packets reach the non-IRB interface of a spine switch it floods the packet to other spines and all Ethernet Segment Identifier (ESI) leaf switches. This flooding causes the packet to be forwarded in a endless loop, which can lead to saturation of the involved links and in turn impact to legitimate traffic.
This issue affects Junos OS on QFX10000 Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S4.
This issue does not affect Junos version after 24.4 as the QFX10000 Series devices are not supported on newer versions anymore. |
