| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the Oracle HRMS (Norway) product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle HRMS (Norway). While the vulnerability is in Oracle HRMS (Norway), attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle HRMS (Norway) accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead to denial of service via Exponential Data Expansion (CAPEC-197). An authenticated user may submit a specially crafted query to the ES|QL engine that causes exponential CPU consumption during query evaluation. Because the resource exhaustion persists beyond query completion, repeated requests can fully exhaust the available query worker resources, rendering ES|QL queries unavailable until the node is restarted. |
| In NLnet Labs Unbound 1.13.2 up to and including 1.25.1, stub or forward zones where the name is below an intermediate labed below a DNSSEC signed zone could be shadowed by the intermediate label's secure NXDOMAIN answer from the parent. This is caused by an off-by-one error in 'harden-below-nxdomain' logic; enabled by default. It effectively bypasses the configuration and the configured stub/forward zone is never contacted. 'harden-below-nxdomain' does an upward DNS cache walk together with a delegation point guard that does not allow NXDOMAIN synthesis above stub/forward zones. The guard tests the domain name but before stripping a label. This results in an iteration where the domain name equals the configured stub/forward zone apex that passes the guard, strips one more label, and probes the cache at the apex's immediate public parent. If that parent has a cached DNSSEC-secure NXDOMAIN, which it will for any private namespace nested two or more labels under a signed public name, the walk returns it and the configured stub/forward upstream is never contacted. This can only be triggered by the query for the intermediate label (between the stub/forward apex and the DNSSEC parent zone). |
| With NLnet Labs Unbound up to and including version 1.25.1, applications using libunbound and configured with 'unwanted-reply-threshold', could eventually be abruptly terminated if the threshold is reached and libunbound needs to call 'libworker_alloc_cleanup' since the function is absent from the function call allow list. When an application using libunbound sets 'unwanted-reply-threshold' to any non-zero value and the iterator queries an authoritative that replies with enough wrong-transaction-ID UDP datagrams to cross the threshold, the 'libworker_alloc_cleanup' will eventually be called. Since the function is absent from the function call allow list, this leads to a fatal exit of libunbound and eventual termination of the embedding application.Unbound itself is not affected since its relevant function 'worker_alloc_cleanup' is registed in the allow list and proceeds to perform the documented cache flush. |
| In NLnet Labs Unbound 1.16.2 up to and including 1.25.1, a similar vulnerability as with CVE-2026-40622 in the 'ghost domain names' family of attacks was found in Unbound that could extend the ghost domain window by up to one cached TTL configured value for A/AAAA glue records. Similar to other 'ghost domain names' attacks, an adversary needs to control a (ghost) zone and be able to query a vulnerable Unbound. A single client A/AAAA query can cause Unbound to overwrite the cached expired parent-side glue rrset and essentially extend the ghost domain window by up to one cached TTL configured value ('cache-max-ttl'). In configurations where 'harden-referral-path: yes' is used (non-default configuration), no client query is required since Unbound implicitly performs that query. This is a variant of CVE-2026-40622 which only addressed the NS query. |
| A flaw was found in the Ansible Lightspeed Model Context Protocol (MCP) server. This vulnerability, known as path traversal, allows an attacker to manipulate an AI agent through indirect prompt injection. By doing so, the attacker can cause the server to write files to unauthorized locations on the user's system. This can result in the exposure of sensitive host information and enable the attacker to execute malicious commands, potentially leading to a full system compromise. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, client terminated DNS-over-QUIC (DoQ) queries are not accounted properly by Unbound resulting in low-cost inflation of the waiting number of replies for already in-flight resolution queries. This results in degradation of resolution service for new clients for already in-flight queries. A malicious actor can exploit the vulnerability by issuing DoQ queries for query names that need resolution and proceeding on immediately terminating the query by one of STOP_SENDING/RESET_STREAM/CONNECTION_CLOSE QUIC frames. Those terminated DoQ queries are not properly counted for and keep inflating the number of waiting replies for in-flight queries. When the maximum is reached, it results in silent query drops for new clients needing resolution for already in-flight queries. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. Additionally, a malicious actor needs access to multiple source IPs to bypass the by-default configured 'wait-limit' option. |
| Traefik 3.6.0 through 3.6.22 and 3.7.0 through 3.7.6 fail to enforce the crossProviderNamespaces allowlist for IngressRouteTCP service serversTransport references (the allowlist was only enforced for HTTP serversTransport references). A low-privileged Kubernetes user in a namespace not listed in crossProviderNamespaces can set serversTransport: foo@file on an IngressRouteTCP service, causing Traefik to accept the forbidden cross-provider reference and use a file-provider TCPServersTransport — including privileged backend mTLS client certificates, SPIFFE identity, or PROXY-protocol settings. This is fixed in 3.6.23 and 3.7.7. |
| In Unbound 1.9.0 up to and including 1.25.1, when a DNSCrypt query is received over TCP, the routine that encrypts the reply in place fails to bound the reply length against the destination buffer size. The size clamp that protects the UDP path is not applied on the TCP path, so a reply larger than 65504 bytes is shifted forward by 48 bytes inside a buffer of capacity equal to 'msg-buffer-size', writing past the end of the heap allocation. A single malicious encrypted query crashes the resolver and lead to denial of service. This vulnerability needs Unbound to be compiled with DNSCrypt support ('--enable-dnscrypt') and the 'dnscrypt:' clause to be configured and enabled for the listening interfaces. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, when downstream DNS-over-QUIC (DoQ) is enabled, the first two bidirectional streams on a new QUIC connection (stream_id 0 and 4) bypass the per-stream 'quic-size' gate entirely, and large input buffers are allocated later, after only the 2-byte length prefix has been received from the initial streams. As a result, a remote client can make Unbound exceed the configured 'quic-size' limit with low-cost input. Using only one connection and two streams, each sending a declared 65535-byte length prefix and then holding the streams open, a client can already trivially make Unbound roughly allocate double that amount. This is a remote availability issue / memory-accounting bypass in the downstream DoQ implementation that leads to denial of service for new DoQ clients. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. |
| n8n before 1.123.64, 2.29.8, and 2.30.1 fails to enforce the "Allowed HTTP Request Domains" restriction on HTTP-based credentials (Header Auth, Basic Auth, Query Auth, OAuth) in the GraphQL node, unlike the HTTP Request node. An authenticated user able to create or edit workflows can point the node's endpoint at a server they control and exfiltrate restricted credentials. Only instances where a credential has "Allowed HTTP Request Domains" configured and is usable by non-owner users are affected. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, in DNS-over-QUIC environments, with high concurrency and under pressure, an assertion in libngtcp2 about monotonic timestamps could trigger and result in server termination and thus denial of service. When interfacing with libngtcp2, for DNS-over-QUIC support in Unbound, it is expected to use monotonic time. Unbound was using realtime instead, and in DoQ environments with high concurrency and under pressure, an assert in libngtcp2 for the quic timestamp would trigger and terminate the server.This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. |
| n8n before 2.29.8 and 2.30.x before 2.30.1 does not enforce shell sandbox restrictions on Linux and Windows in the @n8n/computer-use package (sandboxing was applied only on macOS). Shell commands executed by the tool run without any filesystem or network restrictions, allowing unrestricted access to the host filesystem and network from within the computer-use agent process. This issue only affects deployments where the @n8n/computer-use package is explicitly installed and running; standard n8n installations are not affected. |
| The WP Foodbakery plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the 'delete_locations_backup_file_callback' function in all versions up to, and including, 4.9. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| A vulnerability in the Veeam Updater component of the Veeam Software Appliance that could allow a local user to elevate their privileges and gain root-level access to the underlying operating system. |
| A weakness has been identified in umijs umi up to 4.6.63. The affected element is the function git.getFileCreateInfo of the file packages/utils/src/getFileGitIno.ts of the component GIT File Helper. This manipulation causes os command injection. The exploit has been made available to the public and could be used for attacks. Upgrading to version 4.6.64 is sufficient to fix this issue. Patch name: b6da12c17b024a43badb1fa565720c38cf42e647. Upgrading the affected component is advised. |
| The Product Addons and Product Options With Custom Fields WordPress plugin before 1.6.15 does not restrict an unauthenticated file-upload endpoint and accepts SVG files that are stored and served inline, allowing an unauthenticated attacker to upload a malicious SVG whose embedded script executes in the session of any user (such as an administrator) who later opens the file. |
| A vulnerability was determined in QUSETIONS MiniCode-Python 0.1.0. This vulnerability affects the function subprocess.Popen of the file minicode/config.py of the component Project File Handler. Executing a manipulation can lead to os command injection. The attack may be launched remotely. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.1.0-rc1 is able to resolve this issue. This patch is called 9d868dc2550f426c6ddf8ee98f30ffe450ca5e32. It is suggested to upgrade the affected component. |
| mrubyc through release3.4.1 was found to contain an out-of-bounds read in builtin missing-method lookup inside mrbc_find_method(). |
| mrubyc through 3.4.1 was found to contain a NULL pointer dereference in src/vm.c in op_super() / OP_SUPER due to a missing runtime guard for top-level super. |
