| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: harden firmware build-info bounds checks
panthor_fw_read_build_info() checks whether the metadata range fits in the
firmware image with hdr.meta_start + hdr.meta_size. Both fields are u32, so
the addition can wrap and let an out-of-bounds range pass validation.
The function also reads the "git_sha: " prefix without first checking that
the metadata is long enough, and meta_size == 0 can underflow the NULL
terminator index.
Use subtraction-based bounds checking and reject metadata that is too short
to contain the expected prefix and trailing NULL byte. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid force-completing uninitialized UVD rings
uvd_v7_0_sw_init() does not initialize the UVD decode ring for an
SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes
the decode ring when restoring its fence sequence.
Skip fence completion when the fence driver is not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix FCE trace use-after-free during firmware dump
qla2x00_free_fce_trace() freed and cleared ha->fce while holding only
fce_mutex. The firmware-dump consumers qla27xx_fwdt_entry_t264() and
qla25xx_copy_fce() read ha->fce (NULL check followed by a copy of the
buffer) under hardware_lock and never take fce_mutex. A debugfs FCE
disable could therefore free the DMA buffer between a dump's NULL check
and its copy, resulting in a use-after-free.
Unpublish ha->fce under hardware_lock, then release the lock and free
the DMA buffer (dma_free_coherent() may sleep). A concurrent dump either
completes its check and copy with the buffer still valid, or observes
ha->fce == NULL and skips it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize flash version read in reset handler
The "update cache versions without reset" sysfs reset operation (0x20261)
calls get_flash_version(), which reads hardware flash registers, without
holding ha->optrom_mutex. The VPD update path serializes the same call
under optrom_mutex, so this reset path can interleave its flash register
accesses with a concurrent VPD or optrom flash operation and corrupt the
reads.
Hold ha->optrom_mutex across the get_flash_version() call to match the
VPD update path. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix BSG job leak on validate flash image error path
qla28xx_validate_flash_image() returns QLA_SUCCESS (0) unconditionally,
telling the FC BSG transport (fc_bsg_host_dispatch()) that the driver
owns and will complete the request. But bsg_job_done() is guarded by "if
(!rval)", so on the error path (rval == -EINVAL) neither the driver nor
the transport completes the job. The request dangles until it times out,
leaking block layer resources.
Commit c2c68225b145 ("scsi: qla2xxx: Fix bsg_done() causing double
free") added the "if (!rval)" guard to a batch of BSG handlers. That is
correct for handlers that also return the error code (the transport then
completes the job once via fail_host_msg), but this function returns
QLA_SUCCESS unconditionally, so the guard turned a correct single
completion into a leak.
Always call bsg_job_done(): bsg_reply->result is DID_OK and the error is
reported in vendor_rsp[0], and since the function returns 0 the
transport will not complete the job a second time. |
| Dell ObjectScale, versions prior to ObjectScale 4.4.0.0, contains an Improper Authentication vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, `djust.tenants` isolation was enforced only on the HTTP path. The current tenant was stored in `threading.local()` and set exclusively by the HTTP-only `TenantMiddleware`, so on the live (WebSocket/SSE) path `get_current_tenant()` was always `None` during mount and every event handler — and the tenant-aware `QuerySet` manager failed OPEN (returned the unfiltered queryset, ignoring `STRICT_MODE`), disclosing every tenant's rows to whoever held the socket. `threading.local` was additionally shared across connections on the `sync_to_async` executor thread. This issue is fixed in djust 1.0.7. Tenant storage moved to a `contextvars.ContextVar` (per async task); the resolved tenant is bound around WS/SSE mount and every dispatch; both managers scope the base queryset once and fail CLOSED (`.none()` under the default `STRICT_MODE`); and system check S006 warns when `STRICT_MODE=False`. No known workarounds are available on the live path. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to clear dirty flag on folio in error path
If node block is corrupted due to chksum mismatch or inconsistent
footer info, it needs to drop clear flag of node folio, in order
to persist inconsistent node data to storage. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: use the mount idmap for the owner check in f2fs_xattr_advise_set()
f2fs_xattr_advise_set() calls inode_owner_or_capable() with &nop_mnt_idmap
before allowing the "system.advise" xattr to be set, instead of the idmap
that the VFS passes to the ->set() handler.
f2fs supports idmapped mounts, so on such a mount this checks the caller's
fsuid against the unmapped on-disk owner rather than the mapped owner: the
actual owner can be wrongly denied with -EPERM and an unrelated caller
wrongly allowed. Pass the handler's idmap instead. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate MOVE_RANGE destination size
F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end
before updating i_size. A source hole can expose this: __clone_blkaddrs()
skips NULL_ADDR entries and returns success, so the caller can still extend
the destination inode with unchecked pos_out + len.
Reject destination overflow and use inode_newsize_ok() before extending
the destination inode. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: only redirty pinned folios in redirty_blocks
redirty_blocks() pins folios with read_cache_folio() and then walks the
same range again with filemap_lock_folio() to redirty them and drop the
references it took.
Commit 5951fee46bef ("f2fs: Use a folio in redirty_blocks()") changed
the second pass to a do/while loop. If read_cache_folio() fails before
anything is pinned, page_idx does not advance but the cleanup loop still
runs once.
If readahead has already populated the failed folio in page cache, that
extra iteration finds it and folio_put_refs(folio, 2) drops one
reference too many. Later drop_caches or reclaim can then report
"BUG: Bad page state".
Only redirty the range that was pinned successfully. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started
qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not
started (!ha->flags.fw_started), but the out: path unconditionally calls
qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an
unconditional doorbell write to the request queue in-pointer register.
This rings the firmware doorbell and queues an IOCB that stopped or
resetting firmware cannot consume, and touches MMIO during the reset/EEH
window where fw_started is also clear.
Only emit the LS reject IOCB (and ring the doorbell) when fw_started is
set; otherwise just clean up and return. The post-allocation failure
cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started
and still send the reject. Apply the same guard to the reject emission
in qla2xxx_process_purls_pkt(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read
In qla2x00_status_entry(), the FWI2 status path advances sense_data and
shrinks par_sense_len by rsp_info_len:
if (IS_FWI2_CAPABLE(ha)) {
sense_data += rsp_info_len;
par_sense_len -= rsp_info_len;
}
rsp_info_len is a 32-bit value taken directly from the target's FCP
response (sf.rsp_data_len), while par_sense_len is the IOCB data area
size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target
reporting an rsp_info_len larger than par_sense_len makes the unsigned
subtraction underflow to a huge value and advances sense_data out of
bounds.
The underflowed par_sense_len then defeats the cap in
qla2x00_handle_sense():
if (sense_len > par_sense_len)
sense_len = par_sense_len;
memcpy(cp->sense_buffer, sense_data, sense_len);
so the memcpy reads up to SCSI_SENSE_BUFFERSIZE bytes from the
out-of-bounds sense_data pointer, leaking adjacent response-ring/heap
memory into the command's sense buffer.
Clamp rsp_info_len to par_sense_len before the subtraction so
par_sense_len can never underflow and sense_data stays within the IOCB
data area. The fix sits before the comp_status switch, covering both
qla2x00_handle_sense() call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: fix use-after-free of dev_next->devlist on disconnect
When a device with has_dual_ts=1 is probed and the is_audio_only path
is taken, both dev and dev->dev_next are added to the global
em28xx_devlist via em28xx_init_extension(). However, during disconnect,
em28xx_close_extension(dev) only calls list_del(&dev->devlist), leaving
dev->dev_next->devlist still linked in the global list. When dev_next is
subsequently freed via kref_put(), its devlist entry becomes a dangling
pointer in em28xx_devlist. The next device probe that calls
em28xx_init_extension() triggers a list corruption BUG when list_add_tail
detects the freed node.
This bug was exposed by commit a368ecde8a50 ("USB: core: Fix duplicate
endpoint bug by clearing reserved bits in the descriptor") which clears
reserved bits in bEndpointAddress during endpoint parsing. This causes
fuzzed endpoint addresses like 0xf3 to be normalized to 0x83, which
em28xx interprets as a vendor audio endpoint, enabling the
is_audio_only + has_dual_ts code path that was previously unreachable
with such descriptors.
Fix this by removing dev->dev_next->devlist from the global list in
em28xx_close_extension() before the device is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cec: extron-da-hd-4k-plus: add sanity check
Add check to prevent overflowing msg.msg[] in case the incoming data
is malformed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Remove VM-wide VNCR mapping counter
The global VNCR mapping counter is used to decide whether an L1
provided VNCR page is mapped in L0 on any CPU at the point of
dealing with a TLB invalidation. It is incremented when a mapping
is made in the fixmap, and decremented when unmapped.
As it turns out, this tracking has several flaws:
- we are trying to invalidate TLBs, and the mapping is only an
opportunistic consequence of the TLB. Checking this counter to
decide whether a TLB needs to be invalidated may result in missed
invalidations.
- an L1 vcpu invalidating its own TLB (a very likely case) will not
succeed in invalidating the VNCR pseudo TLB because that page is
not mapped in L0 at this stage.
Given that this tracking fails at delivering the minimum guarantees
that are required and is only a performance optimisation, remove it
completely. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: sgp30: Handle IAQ thread creation failure
kthread_run() can fail and return an error pointer, but sgp_probe() stores
it and returns success, so the device is registered without its IAQ thread
and sgp_remove() later passes the error pointer to kthread_stop(). Return
the error from probe instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: loongson: Fix error handling in ACPI property parsing
In loongson_card_parse_acpi(), the return value of
device_property_read_string() for the `codec-dai-name` property was
ignored. If the property is missing or invalid, an uninitialized pointer
would be used later, potentially leading to undefined behavior.
Fix this by checking the return value and propagating the error
appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
struct qla_i2c_access carries a 16-bit length field alongside a fixed
64-byte buffer:
struct qla_i2c_access {
uint16_t device, offset, option, length;
uint8_t buffer[0x40];
} __packed;
qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied
i2c->length without any bounds check. i2c is overlaid on a 256-byte
on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to
65535 overruns both:
- write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and
over-writes the sfp heap buffer, and qla2x00_write_sfp() then DMAs
i2c->length bytes out of the 256-byte buffer.
- read: qla2x00_read_sfp() DMAs i2c->length bytes into the 256-byte sfp,
then memcpy(i2c->buffer, sfp, i2c->length) overflows the 64-byte
buffer inside the on-stack array.
A caller holding CAP_SYS_RAWIO can use this to corrupt the heap and the
kernel stack. Reject requests whose length exceeds the buffer before any
copy or DMA transfer in both handlers. |
