| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A use-after-free in the gf_filter_packet_destroy function (/filter_core/filter_pck.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MPEG-2 file. |
| A heap use-after-free in the gf_odf_ac4_cfg_clean_list function (/odf/descriptors.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AC4 file. |
| A NULL pointer dereference in the gf_ac4_presentation_ch_mode function (/media_tools/av_parsers.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AC4 file. |
| A flaw was found in Podman. If an attacker can pass a crafted tar archive to the `podman load` command, they can create files on the host machine with the privileges of the user running Podman. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure
pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer,
which only calls iio_triggered_buffer_cleanup() -- it does not undo the
iio_device_register() that already succeeded a few lines above. probe()
then returns the error, the devm-managed indio_dev is freed, but the
iio core still has it registered: the sysfs/chardev nodes stay live and
point at freed memory.
Add an error_unreg_dev label that unregisters the iio device before
falling through to the existing buffer cleanup, mirroring the teardown
order already used in lidar_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: rohm-bm1390: Return error when read fails
The data reading function ignores the cached error value, and
unconditionally returns 0. Return cached 'ret' -value after stopping
the measurement so user knows if read failed and data is garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Make the DP tunnel activation callback mandatory
tb_tunnel_alloc_dp() takes an optional callback which is run from
dprx_work once the DPRX capabilities read has completed. Without that
callback tb_dp_dprx_start() reads the capabilities synchronously and
never queues the work. It however always takes a tunnel reference which
is only dropped by dprx_work itself or by tb_dp_dprx_stop() when
cancel_delayed_work() actually canceled that work. That reference is
thus leaked for every tunnel without a callback.
The only tunnels without one are those from tb_tunnel_discover_dp(),
which are activated again when restoring from hibernation.
Pass the callback to tb_tunnel_discover_dp() as well and drop the
synchronous path such that the DPRX capabilities are always read from
dprx_work. Hibernation restore then also no longer blocks for up to 12
seconds while waiting for that read to complete.
Also fix up the KUnit tests. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix dynamic id driver deregistration race
Only free the dynamic ids after having deregistered the driver and
removed the "new_id" attribute to avoid leaking any id added by a racing
write to the attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: set info->band for 802.3 encap offload frames
Unlike the 802.11 TX paths, ieee80211_8023_xmit() does not set
info->band from the channel context on non-MLD interfaces. It stays at
0, so ieee80211_get_tx_rates() uses the wrong band for these frames.
Set it the same way as ieee80211_build_hdr(): drop the frame if there is
no channel context, and leave the band at 0 on MLD interfaces. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: minstrel_ht: validate fixed rate index
The fixed_rate_idx debugfs file is a plain u32 attribute, so any value
can be written to it. minstrel_ht_update_stats() then copies the value
into mi->max_tp_rate[] and mi->max_prob_rate, and
minstrel_ht_set_rate() uses MI_RATE_GROUP()/MI_RATE_IDX() to index
minstrel_mcs_groups[] (42 entries) and mi->groups[].rates[] (10 entries)
with it.
Writing e.g. 65535 selects group 4095 and rate index 15, far outside
both arrays. The out-of-bounds entries are dereferenced and updated as
struct minstrel_rate_stats (retry counts, etc.), so the invalid index
corrupts adjacent kernel memory. With CONFIG_UBSAN_BOUNDS the access is
reported as an array-index-out-of-bounds in minstrel_ht_set_rate().
Only a valid group/rate pair, or U32_MAX to disable fixed rate
processing, can be used safely, so reject any other value when the
debugfs file is written.
The file is only reachable through a root-only debugfs mount, so this is
not a privilege boundary. The out-of-bounds access is still a bug that
must not be reachable through a writable debugfs attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: keep fallback association elements alive
Associating to a non-transmitted MBSSID profile reads freed memory while
determining the operating channel and applying HT capabilities.
When an association response omits WMM, HT, or VHT information,
ieee80211_assoc_config_link() parses the cached BSS IEs and copies the
missing element pointers out of that fallback parse. For a
non-transmitted MBSSID profile those pointers refer to merged-profile
storage owned by the parse object, and the fallback block frees that
object at its end. The copied pointers are used afterwards to determine
the operating channel, configure bandwidth, and apply HT capabilities.
Keep the fallback parse result alive until association setup finishes.
[reorder variable declaration] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: account proxy paths against the mesh path limit
Proxy-path churn can drive the interface path counter negative and let
later mesh path additions exceed MESH_MAX_MPATHS.
mesh_path_free_rcu() decrements the interface mpaths counter for entries
from both the mesh and proxy path tables, but mpp_path_add() never
reserves a slot in that counter. Removing or expiring a proxy path
therefore returns a slot that was never charged.
mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once
it falls below the number of installed paths the limit no longer holds.
Reserve the shared quota before allocating a proxy path and release it on
every unsuccessful addition. Mesh and proxy paths now share one
1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching()
unregister_fprobe() and unregister_fprobe_async() (used by BPF
kprobe-multi) rely on standard RCU grace periods (synchronize_rcu()
and call_rcu()) to wait until in-flight fprobe handlers complete before
freeing the fprobe.
However, if an fprobe handler executes while RCU is not watching (such
as in the idle loop or nohz_full extended quiescent states), standard
RCU does not track preemption-disabled sections. Consequently,
synchronize_rcu() does not wait for those executions, which can lead
to a use-after-free if the fprobe is freed immediately after
unregistration. Ensure handlers exit early when !rcu_is_watching().
Furthermore, fprobe_fgraph_entry() and fprobe_ftrace_entry() previously
used guard(rcu)() and rcu_read_lock(), which invoke lockdep on every
hit under CONFIG_PROVE_LOCKING. This adds overhead and can cause lockdep
recursion if probed functions interact with lockdep.
Since rhltable_lookup() and rhl_for_each_entry_rcu() use
rcu_dereference_all_check() (which checks rcu_read_lock_any_held()),
holding preemption disabled via rcu_read_lock_sched_notrace() is fully
valid and sufficient so long as rcu_is_watching() is true.
Define and use guard(rcu_sched_notrace)() across fprobe_ftrace_entry(),
fprobe_fgraph_entry(), and fprobe_return(). This eliminates fast-path
rcu_read_lock() and lockdep overhead while guaranteeing safe grace
period synchronization. |
| SQL injection via identifier injection in the tableName and tableFields POST parameters of admin AJAX endpoints (admin/AJAX_lookup_handler.php, admin/AJAX_check_id.php, admin/AJAX_vocabolary_control.php) in SENAYAN Library Management System (SLiMS) Bulian 9.8.0 allows any authenticated staff user to extract arbitrary database contents. |
| A segmentation violation in the gf_props_equal_internal function (/filter_core/filter_props.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted data file. |
| The affiliate-toolkit WordPress plugin before 3.9.1 does not prevent a low-privileged user from supplying a template body that its bundled templating engine compiles and executes as PHP, allowing users with the Contributor role or above to run arbitrary PHP code on the server. |
| The Fast Courier WordPress plugin before 5.2.4 does not sanitize and escape a value before using it in a SQL query on an unauthenticated REST route, allowing unauthenticated attackers to perform SQL injection and read arbitrary data from the database. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JAXP). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| Vulnerability in the Oracle Identity Manager product of Oracle Fusion Middleware (component: OIM Legacy UI). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Identity Manager. Successful attacks of this vulnerability can result in takeover of Oracle Identity Manager. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| A segmentation violation in the gf_isom_get_esd function (/isomedia/isom_read.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. |
