| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A vulnerability in the access control list (ACL) processing of IPv4 packets of Cisco SD-WAN vEdge Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to the improper enforcement of the implicit deny all at the end of a configured ACL. An attacker could exploit this vulnerability by attempting to send unauthorized traffic to an interface on an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. |
| The Amp’ed RF BT-AP 111 Bluetooth access point's HTTP admin interface does not have an authentication feature, allowing unauthorized access to anyone with network access. |
| The Wp Social Login and Register Social Counter plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 3.0.7. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token. |
| The User Toolkit plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.2.3. This is due to an improper capability check in the 'switchUser' function. This makes it possible for authenticated attackers, with subscriber-level permissions and above, to log in as any existing user on the site, such as an administrator. CVE-2024-50503 may be a duplicate. |
| The Extensions by HocWP Team plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 0.2.3.2. This is due to missing validation on the user being supplied in the 'verify_email' action. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator. The vulnerability is in the Account extension. |
| The Smart Slider 3 plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the upload function in all versions up to, and including, 3.5.1.22. This makes it possible for authenticated attackers, with contributor-level access and above, to upload files, including SVG files, which can be used to conduct stored cross-site scripting attacks. |
| A weakness has been identified in joey-zhou xiaozhi-esp32-server-java up to 3.0.0. This impacts the function tryAuthenticateWithCookies of the file AuthenticationInterceptor.java of the component Cookie Handler. Executing manipulation can lead to improper authentication. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. Upgrading to version 4.0.0 will fix this issue. It is recommended to upgrade the affected component. |
| The CGC Maintenance Mode plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.2 via the REST API. This makes it possible for unauthenticated attackers to view protected posts via REST API even when maintenance mode is enabled. |
| Users with low privileges (all permissions deselected in the administrator permissions settings) can view certain pages that expose sensitive information such as company names, users' names and surnames, stage names, and monitoring campaigns and their descriptions. In addition, unprivileged users can see and edit the descriptions of tags. At the time of publication of the CVE no patch is available.
|
| Various software builds for the following TCL devices (30Z, A3X, 20XE, 10L) leak the device IMEI to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys); TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys); TCL 20XE (TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB7I-0:user/release-keys and TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB83-0:user/release-keys); and TCL 10L (TCL/T770B/T1_LITE:10/QKQ1.200329.002/3CJ0:user/release-keys and TCL/T770B/T1_LITE:11/RKQ1.210107.001/8BIC:user/release-keys). This malicious app reads from the "gsm.device.imei0" system property to indirectly obtain the device IMEI. |
| OctoPrint-SpoolManager is a plugin for managing spools and all their usage metadata. In versions 1.8.0a2 and older of the testing branch and versions 1.7.7 and older of the stable branch, the APIs of the OctoPrint-SpoolManager plugin do not correctly enforce authentication or authorization checks. This issue has been patched in versions 1.8.0a3 of the testing branch and 1.7.8 of the stable branch. The impact of this vulnerability is greatly reduced when using OctoPrint version 1.11.2 and newer. |
| Budget Control Gateway acts as an entry point for incoming requests and routes them to the appropriate microservices for Budget Control. Budget Control Gateway does not properly validate auth tokens, which allows attackers to bypass intended restrictions. This vulnerability is fixed in 1.5.2. |
| Improper permission settings for mobile applications (com.transsion.carlcare) may lead to user password and account security risks. |
| Stardust is a platform for streaming isolated desktop containers. With this exploit, inter container communication (ICC) is not disabled. This would allow users within a container to access another containers agent, therefore compromising access.The problem has been patched in any Stardust build past 12/20/24. Users are advised to upgrade. Users may also manually disable ICC if they are unable to upgrade. |
| Icinga Director is an Icinga config deployment tool. A Security vulnerability has been found starting in version 1.0.0 and prior to 1.10.4 and 1.11.4 on several director endpoints of REST API. To reproduce this vulnerability an authenticated user with permission to access the Director is required (plus api access with regard to the api endpoints). And even though some of these Icinga Director users are restricted from accessing certain objects, are able to retrieve information related to them if their name is known. This makes it possible to change the configuration of these objects by those Icinga Director users restricted from accessing them. This results in further exploitation, data breaches and sensitive information disclosure. Affected endpoints include icingaweb2/director/service, if the host name is left out of the query; icingaweb2/directore/notification; icingaweb2/director/serviceset; and icingaweb2/director/scheduled-downtime. In addition, the endpoint `icingaweb2/director/services?host=filteredHostName` returns a status code 200 even though the services for the host is filtered. This in turn lets the restricted user know that the host `filteredHostName` exists even though the user is restricted from accessing it. This could again result in further exploitation of this information and data breaches. Icinga Director has patches in versions 1.10.4 and 1.11.4. If upgrading is not feasible, disable the director module for the users other than admin role for the time being. |
| A vulnerability was found in Weitong Mall 1.0.0. It has been classified as critical. This affects an unknown part of the component Sale Endpoint. The manipulation of the argument ID leads to improper authorization. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| Multiple security vulnerabilities has been discovered in web interface of NetGuardian DIN Remote Telemetry Unit (RTU), by DPS Telecom. Attackers can exploit those security vulnerabilities to perform critical actions such as escalate user's privilege, steal user's credential, Cross Site Scripting (XSS) and Cross-Site Request Forgery (CSRF). |
| scratch-coding-hut.github.io is the website for Coding Hut. In 1.0-beta3 and earlier, the login link can be used to login to any account by changing the username in the username field. |
| A flaw in versions of Delphix Data Control Tower (DCT) prior to 19.0.0 results in broken authentication through the enable-scale-testing functionality of the application. |
