| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mali-c55: Fix possible ERR_PTR in enable_streams
The media_pad_remote_pad_unique() function returns either a valid
pointer or an ERR_PTR() on failure (-ENOTUNIQ if multiple links are
enabled, -ENOLINK if no connected pad is found). The return value
was assigned directly to isp->remote_src and dereferenced in the
next line without checking for errors, which could lead to an
ERR_PTR dereference.
Add proper error checking with IS_ERR() before dereferencing the
pointer. Also set isp->remote_src to NULL on error to maintain
consistency with other error paths in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: alvium: fix critical pointer access in alvium_ctrl_init
The current implementation of alvium_ctrl_init creates several controls in
function alvium_ctrl_init and uses the returned pointer without check. That
can cause write access over NULL-pointer for several controls. The reworked
code checks the pointers before adding flags. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: Fix the error code of devm_kzalloc() in vip_probe_slice()
In vip_probe_slice(), the error check for devm_kzalloc() incorrectly
uses PTR_ERR_OR_ZERO() which returns 0 for NULL pointer.
Return -ENOMEM for devm_kzalloc() failure. |
| A flaw was found in the Linux kernel's udmabuf device driver, within a fault handler. This issue occurs due to the lack of proper validation of user-supplied data, which can result in memory access past the end of an array. This may allow an attacker to escalate privileges and execute arbitrary code in the context of the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Preserve rq tracking across local DSQ dispatch
dispatch_to_local_dsq() can run from scx_bpf_dsq_move_to_local() while
ops.dispatch() has recorded the current rq. Moving a task to a local DSQ
may switch to the source or destination rq before synchronously invoking
ops.dequeue() through the following path:
SCX_CALL_OP(dispatch, rq)
ops.dispatch()
scx_bpf_dsq_move_to_local()
scx_flush_dispatch_buf()
finish_dispatch()
dispatch_to_local_dsq()
scx_dispatch_enqueue()
local_dsq_post_enq()
call_task_dequeue()
SCX_CALL_OP_TASK(dequeue, locked_rq, ...)
The nested callback saves the recorded rq and restores it on return. If
the rq tracking does not follow the lock switch, update_locked_rq() can
trigger the following lockdep assertion while restoring an rq which is
no longer held:
WARNING: kernel/sched/sched.h:1641 at call_task_dequeue+0x160/0x170
Call Trace:
scx_dispatch_enqueue+0x2b0/0x460
dispatch_to_local_dsq+0x138/0x230
scx_flush_dispatch_buf+0x1af/0x220
scx_bpf_dsq_move_to_local___v2+0xe2/0x1c0
bpf__sched_ext_ops_dispatch+0x4b/0xa7
do_pick_task_scx+0x3b6/0x910
__pick_next_task+0x105/0x1f0
__schedule+0x3e7/0x1980
Introduce switch_rq_lock() to update the tracking state together with
each rq lock handoff. Use it in dispatch_to_local_dsq(),
move_remote_task_to_local_dsq() and the in-balance paths of
scx_dsq_move(), ensuring that scx_locked_rq() consistently refers to the
rq whose lock is actually held throughout the lock dance. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix race between registration and connection abortion
This fixes this race:
- thread a: io_uring_enter -> register sqe ->
fuse_uring_create_ring_ent -> allocate ent but doesn't grab queue_ref
yet
- thread b: fuse_conn_destroy() -> fuse_chan_abort() ->
fuse_uring_abort() is a no-op due to queue ref being 0
- thread a: grabs the queue_ref, queue_ref is now 1, rest of
fuse_uring_do_register() logic executes
- thread b: fuse_chan_abort() returns, fuse_chan_wait_aborted() now runs
and calls
"wait_event(ring->stop_waitq, atomic_read(&ring->queue_refs) == 0);"
The abort/unmount thread will hang indefinitely in unkillable state as
nothing will decrement queue_refs or wake stop_waitq, and the ring,
queue, and ent are leaked.
Fix this by checking fch->connected under fch->lock after the created
ent has grabbed a ref count on the queue. This ensures that in the
scenario above, it is guaranteed that we either release the queue ref
and wake up stop_waitq (in case fuse_chan_wait_aborted() is already
waiting) in fuse_uring_do_register() when we detect !fch->connected, or
if the connection is aborted after the check, it is guaranteed that the
async teardown worker will be running in the background cleaning up ents
and decrementing the ent's ref on the queue, which will unblock the
eventual queue and ring teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix aperture mapping leak
amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver
fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to
always return false, so iounmap(aper_base_kaddr) never runs on normal
driver unload, leaving an orphaned entry in the x86 PAT interval tree.
On connected_to_cpu hardware, the aperture is mapped write-back (WB) via
ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC)
over the same range. The WC vs WB conflict causes:
ioremap error for 0x..., requested 0x1, got 0x0
amdgpu: discovery failed: -2
Fix by switching to devres-managed mappings so cleanup is guaranteed
regardless of drm_dev_enter() state:
- connected_to_cpu path: devm_memremap(MEMREMAP_WB). For
IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut,
returning __va(offset) from the existing kernel direct map. No new
ioremap VA or PAT entry is created, so there is nothing to orphan.
- dGPU path: devm_ioremap_wc() registers iounmap() as a devres action,
guaranteeing cleanup at device_del() time.
Also remove iounmap(aper_base_kaddr) from amdgpu_device_unmap_mmio()
since the mapping is now devres-owned.
v2: Remove redundant x86_64 guard (Lijo)
(cherry picked from commit d871e99879cb5fd1fa798b006b4888887e63a17a) |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix irq-disabled in local_bh_enable()
The rxrpc_assess_MTU_size() function calls down into the IP layer to find
out the MTU size for a route. When accepting an incoming call, this is
called from rxrpc_new_incoming_call() which holds interrupts disabled
across the code that calls down to it. Unfortunately, the IP layer uses
local_bh_enable() which, config dependent, throws a warning if IRQs are
enabled:
WARNING: CPU: 1 PID: 5544 at kernel/softirq.c:387 __local_bh_enable_ip+0x43/0xd0
...
RIP: 0010:__local_bh_enable_ip+0x43/0xd0
...
Call Trace:
<TASK>
rt_cache_route+0x7e/0xa0
rt_set_nexthop.isra.0+0x3b3/0x3f0
__mkroute_output+0x43a/0x460
ip_route_output_key_hash+0xf7/0x140
ip_route_output_flow+0x1b/0x90
rxrpc_assess_MTU_size.isra.0+0x2a0/0x590
rxrpc_new_incoming_peer+0x46/0x120
rxrpc_alloc_incoming_call+0x1b1/0x400
rxrpc_new_incoming_call+0x1da/0x5e0
rxrpc_input_packet+0x827/0x900
rxrpc_io_thread+0x403/0xb60
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
...
hardirqs last enabled at (23): _raw_spin_unlock_irq+0x24/0x50
hardirqs last disabled at (24): _raw_read_lock_irq+0x17/0x70
softirqs last enabled at (0): copy_process+0xc61/0x2730
softirqs last disabled at (25): rt_add_uncached_list+0x3c/0x90
Fix this by moving the call to rxrpc_assess_MTU_size() out of
rxrpc_init_peer() and further up the stack where it can be done without
interrupts disabled.
It shouldn't be a problem for rxrpc_new_incoming_call() to do it after the
locks are dropped as pmtud is going to be performed by the I/O thread - and
we're in the I/O thread at this point. |
| Nefteprodukttekhnika BUK TS-G Gas Station Automation System 2.9.1 on Linux contains a SQL Injection vulnerability (CWE-89) in the system configuration module. A remote attacker can send specially crafted HTTP POST requests to the /php/request.php endpoint via the sql parameter in application/x-www-form-urlencoded data (e.g., action=do&sql=<query_here>&reload_driver=0) to execute arbitrary SQL commands and potentially achieve remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Drain pending requests at net namespace exit
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: clone set on flush only
Syzbot with fault injection triggered a failing memory allocation with
GFP_KERNEL which results in a WARN splat:
iter.err
WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992
Modules linked in:
CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845
Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43
+80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9
RSP: 0018:ffffc900045af780 EFLAGS: 00010293
RAX: ffffffff89ca45bd RBX: 00000000fffffff4 RCX: ffff888028111e40
RDX: 0000000000000000 RSI: 00000000fffffff4 RDI: 0000000000000000
RBP: ffffc900045af870 R08: 0000000000400dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d141db R12: ffffc900045af7e0
R13: 1ffff920008b5f24 R14: dffffc0000000000 R15: ffffc900045af920
FS: 000055557a6a5500(0000) GS:ffff888125496000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb5ea271fc0 CR3: 000000003269e000 CR4: 00000000003526f0
Call Trace:
<TASK>
__nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115
nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380
netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761
__sock_release net/socket.c:662 [inline]
sock_close+0xc3/0x240 net/socket.c:1455
Restrict set clone to the flush set command in the preparation phase.
Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree
and pipapo backends to only clone the set when this iteration type is
used.
As for the existing NFT_ITER_UPDATE type, update the pipapo backend to
use the existing set clone if available, otherwise use the existing set
representation. After this update, there is no need to clone a set that
is being deleted, this includes bound anonymous set.
An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone
interface and call it from the flush set path. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix data races on ring->ready
On weakly-ordered architectures, the store to fiq->ops can be
reordered past the store to ring->ready, allowing a CPU that sees
ring->ready == true via fuse_uring_ready() to dispatch requests
through a stale fiq->ops pointer. Upgrade the store to
smp_store_release() and the load in fuse_uring_ready() to
smp_load_acquire() so that the preceding WRITE_ONCE(fiq->ops, ...)
is visible to any CPU that observes ring->ready == true.
Additionally, fuse_uring_do_register() publishes ring->ready with
WRITE_ONCE() but the fast-path check reads it with a plain load.
This is a marked-vs-unmarked access that KCSAN will flag. Wrap it in
READ_ONCE() to mark it without adding unnecessary ordering.
Also wrap the fc->ring load in fuse_uring_ready() in READ_ONCE() to
prevent the compiler from reloading it between the NULL check and the
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: arc: emac: quiesce interrupts before requesting IRQ
Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe
should not see interrupt delivery in the usual case. However, hardware may
still present stale or latched interrupt status left by firmware or the
bootloader.
If probe later unwinds after devm_request_irq() has installed the handler,
such a stale interrupt can still reach arc_emac_intr() during teardown and
race with release of the associated net_device.
Avoid that window by putting the device into a known quiescent state before
requesting the IRQ: disable all EMAC interrupt sources and clear any
pending EMAC interrupt status bits. This keeps the change hardware-focused
and minimal, while preventing spurious IRQ delivery from leftover state. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix unsol_bcast_probe_resp double free on alloc failure
ieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the old
template before allocating the replacement. If the kzalloc() then fails,
it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still points
at the object already queued for freeing. A later update or AP teardown
re-queues that same rcu_head; the second free is caught by KASAN when the
RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800d06f300 by task exploit/145
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-128 of size 128
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: Fix error code in smb2_aead_req_alloc()
The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.
We would have to do something similar to the previous line where it's
cast to int and then long. However, it's simpler to store the return in
an int ret variable.
This bug would eventually result in a crash when dereference the invalid
error pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
In capture_urb_complete(), usb_anchor_urb() is called on every
completion callback, but the URB is already anchored from the
initial submission in tascam_trigger_start(). Each redundant call
corrupts the anchor's doubly-linked list and inflates the URB
refcount. When usb_kill_anchored_urbs() traverses the list during
stream stop / suspend / disconnect, the corrupted list leads to
use-after-free.
Remove the redundant usb_anchor_urb() from the resubmit path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags()
When iptfs_skb_add_frags() copies frag references from the source
frag walk into a new SKB, it increments the page reference count via
__skb_frag_ref() but does not propagate SKBFL_SHARED_FRAG to the
destination SKB's skb_shinfo->flags.
If the source SKB carries shared frags (e.g. from a page-pool backed
receive path), the new inner SKB will appear to ESP as having privately
owned frags. A subsequent esp_input() call for a nested transport-mode
SA then takes the no-COW fast path and decrypts in place, writing over
pages that are still referenced by the outer IPTFS SKB. This causes
kernel-visible memory corruption and can trigger a panic.
All other frag-transfer helpers in the kernel (skb_try_coalesce,
skb_gro_receive, __pskb_copy_fclone, skb_shift, skb_segment) correctly
propagate SKBFL_SHARED_FRAG; align iptfs_skb_add_frags() with this
convention by setting the flag inside the loop immediately after
__skb_frag_ref() and nr_frags++, so every exit path that attaches a frag
unconditionally propagates SKBFL_SHARED_FRAG. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state
Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid
guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path
doesn't use nested_vmx_vmexit() as that API is intended to be used if and
only if L2 is active, and the open coded equivalent neglects to put the
vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages
(and/or mappings) if L1 retries VMLAUNCH/VMRESUME.
Note, the !from_vmenter scenario doesn't suffer the same problem, as
vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is
active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry
getting vmcs12 pages. |
| Out of bounds write in GPU in Google Chrome on Linux prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
