| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: frequency: adf4377: Fully initialize clk_init_data and clk_parent_data
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
adf4377_clk_register() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter is uninitialized, and
thus may cause a crash.
Similarly, adf4377_clk_register() fills in only parent_data.fw_name,
leaving other members of the clk_parent_data structure uninitialized.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad4030: fix invalid oversampling_ratio validation
In ad4030_set_avg_frame_len(), the logarithm is calculated before input
validation. Passing zero or negative values leads to an undefined result
from ilog2().
Validate that the input is strictly positive prior to computing its
logarithm. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Hold a router reference for each allocated HopID
tb_stop() drops the reference to all DP tunnels but does not deactivate
them, thus nothing cancels a dprx_work still in flight (which holds its
own tunnel reference) and the tunnel can outlive tb_switch_remove(). The
HopID releases in tb_path_free() then operate on freed IDAs and trigger
warnings like
ida_free called for id=8 which is not allocated.
This can be triggered by unbinding the driver while a DP tunnel is still
waiting for the DPRX capabilities read to finish. On the Apple NHI
unplugging the cable runs into just that reliably because the read can
never finish right now and because the unplug powers down the entire
USB4 complex and removes the NHI device.
Take a router reference whenever an input or output HopID is allocated
and drop it again after the HopID is released. This keeps the ports and
their HopID IDAs alive for as long as they are used.
The KUnit tests allocate routers without ever registering their devices
so initialize the embedded struct device there as well and drop its
initial reference when the test is finished. |
| A flaw was found in the Open Virtual Network (OVN). In OVN clusters where BFD is used between hypervisors for high availability, an attacker can inject specially crafted BFD packets from inside unprivileged workloads, including virtual machines or containers, that can trigger a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: discard post-EOF pagecache when extending a file via clone range
cifs_remap_file_range() discarded the pagecache only for the folios
overlapping the destination region, so when a clone extends the file the
folio straddling the old EOF - which may hold data dirtied past EOF
through an mmap - was never dropped and became visible as file content
once the file was extended.
Start the discard at the smaller of fstart and the old EOF. i_size is
still old here, so nothing past the old EOF is flushed to the server. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kionix-kx022a: Prevent memory leak and fix state
The driver allocates memory for samples at buffer enable path. If regmap
operation fails in the kx022a_fifo_enable() at the buffer enable path, the
allocated memory is never freed. Furthermore, the state information and
previous hardware configuration(s) aren't undone, potentially leaving
WMI interrupts and buffers enabled, or driver state flags wrong.
Free the memory and revert the hardware configuration and state flags on
error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ade9000: fix NULL pointer dereference in clkout registration
ade9000_setup_clkout() passes NULL as the register address when
registering a divider clock. During clock registration, the common
clock framework calls clk_divider_recalc_rate(), which dereferences
the address through readl(). As a result, probing an ADE9000 configured
as a clock provider with an external input clock crashes.
CLKOUT passes CLKIN through without changing its rate. Register it as
a 1:1 fixed-factor clock, which does not require register access.
This change does not affect the configuration using the internal clock,
for which the driver does not register a clock provider. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ade9000: handle Phase C dip events in IRQ1 handler
ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the
STATUS1 event bits, so a value of 25 left out the highest event bit,
ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported.
Bump the value to 26 so bit 25 is scanned. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: adi-axi-adc: Initialize state mutex
The AXI ADC register access paths serialize transactions with st->lock,
but probe does not initialize it. Initialize the mutex before registering
the backend. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: rohm-bu27034: Fix infinite delay on error
When reading an integration-time fails, the code will use error code to
compute the sleep time.
Fix this by using the smallest integration time as a default if
reading fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: rohm-bm1390: Return error when read fails
The data reading function ignores the cached error value, and
unconditionally returns 0. Return cached 'ret' -value after stopping
the measurement so user knows if read failed and data is garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: aw96103: validate firmware data length
The firmware parser reads a length from the binary header and then uses
it to walk six-byte register/value entries. A truncated firmware image
can make the parser read beyond the copied firmware buffer. A value
smaller than the four-byte count field also underflows, producing a very
large length.
Read the little-endian field with get_unaligned_le32(), as previously
proposed by David Lechner. Validate the header size, reject an
underflowed length, ensure the resulting payload is contained in the
firmware image, and require it to contain whole register/value entries. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix _gaccess_shadow_fault()
In some circumstances, it is possible that the page of nested guest
memory that is being shadowed is not present at all in the parent guest
gmap. dat_entry_walk() will not find any leaf entry and return with
-ENOENT, which will erroneously be propagated all the way to userspace.
Fix by manually calling gmap_link() on the memory of the nested guest
that is being shadowed if the mapping was not already present. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Add missing srcu in kvm_s390_set_irq_state()
Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the
kvm->srcu or the slots lock when performing the Store status operation.
Fix by taking kvm->srcu in kvm_s390_set_irq_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key()
Some callers pass NULL as oldkey. Calling page_cond_set_storage_key()
will cause that NULL pointer to get dereferenced.
Fix by checking for NULL and assigning the pointer to a dummy local
variable to avoid crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix potential races in dat skey functions
When dat_cond_set_storage_key() finds a large page, it will
conditionally set the storage key in absolute memory using
large_crste_to_phys() to get the absolute address.
There is a race window between dat_entry_walk() and
large_crste_to_phys(): the large page could have been split
concurrently, and large_crste_to_phys() might be called with a crste
that does not designate a large page, leading to crashes.
Similar issues were also present in dat_set_storage_key().
dat_get_storage_key() and dat_reset_reference_bit() did instead check
for a potential concurrent splitting of the large page, but then
handled it incorrectly.
Fix by performing a READ_ONCE on the crste pointer, checking and using
the result, instead of dereferencing the pointer again. In case a race
is detacted, try dat_entry_walk() again. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix race in _destroy_pages_crste()
Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid
dereferencing the pointer multiple times. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/uv: Prevent potential out-of-bounds read
When the system has more than 85 secrets, the uv_secret_list struct
array only holds up to 85 items per page, resulting in an out of bounds
read in find_secret_in_page if the targeted secret is in the next page
or not stored at all.
Fix this by looping over the number of stored secrets which is the
per sub-list count of stored secrets and not the overall count. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context
bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If
the sock is a listener that still has children in its accept queue,
tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched()
there trips the debug check:
BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
locks held by test_progs/628: 3, last CPU#3:
#0: ffff8881158cee18 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210
#1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0
#2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0
CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT
Tainted: [W]=WARN
Call Trace:
<TASK>
dump_stack_lvl+0xc1/0xf0
dump_stack+0x10/0x20
__might_resched+0x3d2/0x610
inet_csk_listen_stop+0x7b/0xbf0
tcp_abort+0x23b/0x3b0
bpf_sock_destroy+0xfc/0x140
bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a
bpf_iter_run_prog+0x538/0xde0
bpf_iter_tcp_seq_show+0x26b/0x4b0
bpf_seq_read+0x424/0x1210
vfs_read+0x197/0xe40
ksys_read+0x119/0x240
__x64_sys_read+0x72/0xc0
x64_sys_call+0x647/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fad39b28aca
RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca
RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014
RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000
</TASK>
The commit that added the kfunc already guards lock_sock() in tcp_abort()
and udp_abort() with has_current_bpf_ctx(), but missed the listener path.
Do the same for the cond_resched(). The loop runs inside the iterator's
rcu_read_lock(), it must not reschedule or report a quiescent state there. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: riscv: Fix NACL hfence entry update order
The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE
entry to be populated as follows:
1) find an unused entry with Config.Pending == 0
2) update the Page_Number and Page_Count words
3) update the Config word with Config.Pending set
__kvm_riscv_nacl_hfence() writes the Config word first, so the SBI
implementation (or NACL hardware) can observe a pending entry with
pnum/pcount values left over from the previous use of that entry,
resulting in incorrect TLB flush ranges.
Write pnum and pcount first and the Config word last. Since the
consumer is an external agent on coherent shared memory, use
WRITE_ONCE() to stop the compiler from reordering the stores and
smp_wmb() to make the parameter words globally visible before the
Pending bit is set. |
