| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SQL injection vulnerability in the ‘/ws/apiprensa/getVideoSubcanal’ endpoint due to improper handling of the id_video parameter. The application does not sanitize input before constructing SQL queries, which results in execution errors when malicious input is provided. The vulnerability exposes internal file paths and complete stack traces through the Slim framework’s error handler, which increases the severity due to the combination of information disclosure and SQL injection. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - fix rctx->cryptlen calculation in tegra_gcm_do_one_req()
Perform rctx->cryptlen calculation in tegra_gcm_do_one_req() the same way
it is done in tegra_ccm_crypt_init(). The current formulae may lead to a
crash if a caller does not call tegra_gcm_setauthsize() and so ctx->authsize
remains zero. Then a decrypt operation with incorrect rctx->cryptlen will
lead to a write beyound rctx->dst_sg buffer.
As a follow-up cleanup delete struct tegra_aead_ctx->authsize field since
it appears to be completely unused. Also simplify tegra_ccm_setauthsize()
and tegra_gcm_setauthsize() functions respectively. |
| GNU gzip contains a global buffer overflow vulnerability in the LZH decompression logic caused by improper reuse of shared global state between different decompression formats within a single execution. GNU gzip maintains a global array that is shared across the LZ77, LZW, and LZH decompression routines and is not reinitialized between files processed in the same invocation.
By decompressing a specially crafted LZW file followed by a specially crafted LZH file in a single gzip -d command, an attacker can poison the shared global state and subsequently trigger an out‑of‑bounds read in the LZH decoder. The LZH decompression logic follows stale values left in the shared array, causing reads past the end of the allocated global buffer.
This issue has been fixed in commits 63dbf6b3b9e6e781df1a6a64e609b10e23969681 and e7378c2d421be6a286922374425680bbe9ad8b7d. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve EP11 CPRB length and overflow checks
The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Missing minimum size validation: The ep11_cprb structure and
subsequent payload fields (pld_tag, pld_lenfmt) are copied from
userspace without verifying sufficient buffer length.
2. Arithmetic overflow in length calculations: CEIL4 alignment could
overflow, bypassing size checks and enabling buffer overflows.
3. The payload is asn1 encoded but the function just uses a simple c
struct overlay to access some fields of the payload.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, and validating minimum request size and
minimum reply size before copying from userspace. Do a very simple
asn1 parsing of the payload up to the function value field. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qce - fix error path in devm_qce_register_algs
If ops->register_algs() fails, the error path repeatedly calls the same
ops->unregister_algs() from the failed registration. Use the loop index
to unregister the previously registered algorithms instead. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: avoid deadlock when canceling IRQ affinity notifier
Unregistering IRQ affinity notifiers waits for the callback synchronously.
bnxt takes the netdev instance lock in the notifier (to restart the queue)
and cancels the work under the same lock. This may obviously deadlock.
Move the restart to the async service task. The queue restart isn't
super time sensitive. Store the new TPH tag, schedule the task.
Safely canceling the service task is already ironed out.
In bnxt_request_irq() the order of registering notifier, affinity and
initial TPH programming has to be inverted. I think it was racy
previously since user may trigger an update as soon as notifier
is installed.
There's a small known gap - if pcie_tph_get_cpu_st() fails at init
and the target tag is 0 we may miss programming the entry.
This does not seem worth fixing, the code has skip-on-failure
all over the place, anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: revalidate ihl to prevent out-of-bounds access
While the outer IP header is already pulled into the skb head,
we must be careful and revalidate the embedded headers after
reading them from the skb frags to prevent out-of-bounds
access.
One such place reported by Sashiko is ip_vs_nat_icmp() where
local process can change the ihl field and after
skb_ensure_writable() we can see larger value which is a
problem for the ip_send_check(cih) calls.
Add check to drop the packet if the ihl field is changed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix refcount race between list:set GC and swap
__ip_set_put_byindex() resolved the index to a set pointer under RCU,
then took ip_set_ref_lock in __ip_set_put() to decrement set->ref.
ip_set_swap() holds that same lock while swapping both the ip_set_list
slots and the two sets' ref counters, so it can interleave between the
dereference and the lock acquisition, leaving the caller to decrement a
set whose reference already moved to the other index and hit
BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq,
which the nfnl mutex does not serialize against swap: an expiring
list:set member calls list_set_del() -> ip_set_put_byindex() while
IPSET_CMD_SWAP runs on the referenced sets.
Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap()
already does, keeping the refcount tied to the index rather than to a
stale set pointer.
kernel BUG at net/netfilter/ipset/ip_set_core.c:685!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870)
Call Trace:
<IRQ>
list_set_del (net/netfilter/ipset/ip_set_list_set.c:159)
set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181)
list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578)
call_timer_fn (kernel/time/timer.c:1748)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374)
run_timer_softirq (kernel/time/timer.c:2405)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Reject exited events as group leaders
perf_event_remove_on_exec() sets remove-on-exec events to the EXIT state
and detaches their group relationships. The event's file descriptor can
remain open, however, and perf_event_open() currently accepts that event
as a group leader because its early validation rejects only REVOKED and
DEAD events.
A new sibling can consequently be linked to the detached leader. When
the leader is closed, perf_group_detach() observes that its
PERF_ATTACH_GROUP bit is already clear and skips the new sibling. The
sibling then retains a group_leader pointer to the freed event.
Reject group leaders in the EXIT state. Perform the check while holding
the shared context mutex so that an exec in the target task cannot detach
the leader between validation and group attachment.
[peterz: make the earlier test fully consistent] |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix NULL dereference when killing missing key
ovpn_crypto_kill_key assumes both crypto slots are populated and
dereferences each slot before checking it. That is not guaranteed: a
peer can have only one installed key, and the kill path may be asked to
remove a key that is not present.
Read each slot once while holding the crypto state lock, check for NULL
before looking at key_id, and only replace the slot that actually
matches. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Unlink scc_entry in unix_del_edge().
Kyle Zeng reported that GC could free a dead SCC partially.
The scenario is as follows:
1) Create two SCCs:
X -. A <-> B
^--'
2) Run the following concurrently:
2-1) send() sk-B to sk-B from sk-X
2-2) close() both A and B
At 2-1), there is a small window where unix_add_edges()
publishes a new edge (B <-> B) to GC but its skb is not queued
by skb_queue_tail().
If 2-2) completes before skb_queue_tail() and GC is triggered,
it judges A <-> B as dead, but B is not freed because GC cannot
collect the not-yet-queued skb holding the B <-> B edge.
X -. A <-> B -. This edge is visible
^--' ^..' but skb is not
This itself is not a problem since the next GC run will judge
B as dead as well and free it finally.
X -. A <.> B -.
^--' ^--'
However, X's SCC forces the next GC to call unix_walk_scc_fast(),
and it iterates over A through B's scc_entry.
Let's unlink scc_entry before freeing the vertex in unix_del_edge(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate GEM_CREATE domain combinations
AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK,
but did not validate domain combinations. Userspace could combine
CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making
amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and
hit BUG_ON().
Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/
VRAM domains to be specified one at a time. Return -EINVAL for invalid
combinations in amdgpu_gem_create_ioctl().
v2: Rename helper from amdgpu_gem_domain_valid() to
amdgpu_gem_are_domains_valid() (Christian)
(cherry picked from commit db39852d0c39843cb02048dfb47e4b8c703e9080) |
| Unauthenticated Broken Access Control in Kali Forms <= 2.4.23 versions. |
| Improper neutralization of Script-Related HTML tags in a web page (basic XSS) vulnerability in Softtr Informatics Technology Trading Limited Company E-Commerce Pack allows Cross-Site Scripting (XSS).
This issue affects E-Commerce Pack: before 5.03.01.49. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling
In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is
not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences
wx->msix_entry->entry, leading to a NULL pointer dereference crash.
This issue was introduced by fixing the IRQ vector when the number of
VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to
determine the correct vector index.
Additionally, as a side fix, set the interrupt mask to BIT(0) for the
non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts
share vector 0, and the WX_PX_MISC_IVAR register is only valid in the
MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause
when MSI-X is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: publish GC-visible tuple last
nf_flow_table_iterate() only treats original-direction tuple nodes as
owning entries. Publishing the original node first lets GC observe and
free a flow while flow_offload_add() is still inserting the reply node.
Publish the reply node first and the original node last so GC never
sees a partially installed flow.
KASAN can trigger slab-use-after-free read and write reports in the
flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del,
flow_offload_lookup, etc.). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - zero report size on F54 work error
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: options: reset DSS fields in case of unexpected size
A remote peer could send a malformed DSS with a wrong size, followed by
another DSS or MPC + Data. In this case, the first suboption will be
ignored, but leaving some fields written, which could lead to
inconsistency or access uninitialized data.
Explicitly reset the fields that could have been modified in case of
unexpected size. |
| Authorization bypass through User-Controlled key vulnerability in Summit Security Systems AdisyonPro allows Accessing Functionality Not Properly Constrained by ACLs.
This issue affects AdisyonPro: before v5.21.0. |
