| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: ensure our nlmsg responses are initialised
Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from
DEVCORE Research Team working with Trend Micro Zero Day Initiative
report that a RTM_GETNEIGH will return uninitalised data in the pad
bytes of the ndmsg data.
Ensure we're initialising the netlink data to zero, in the link, addr
and neigh response messages. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/of: Fix reference leak in thermal_of_cm_lookup()
In thermal_of_cm_lookup(), tr_np is obtained via of_parse_phandle(), but
never released.
Use the __free(device_node) cleanup attribute to automatically release
the node and fix the leak.
[ rjw: Changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Skip currently executing CPU in rto_next_cpu()
CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound
RT task, and a CFS task stuck in kernel space. When other CPUs switch from
RT to non-RT tasks, RT load balancing (LB) is triggered; with
HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution
of rto_push_irq_work_func. During push_rt_task on CPU0,
if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED
and after the push operation completes, CPU0 calls rto_next_cpu().
Since only CPU0 is overloaded in this scenario, rto_next_cpu() should
ideally return -1 (no further IPI needed).
However, multiple CPUs invoking tell_cpu_to_push() during LB increments
rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between
rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its
search from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory
&& rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work to
itself and send self-IPIs repeatedly. As long as CPU0 stays overloaded and
other CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop,
which triggers a CPU hardlockup due to continuous self-interrupts.
The trigging scenario is as follows:
cpu0 cpu1 cpu2
pull_rt_task
tell_cpu_to_push
<------------irq_work_queue_on
rto_push_irq_work_func
push_rt_task
resched_curr(rq) pull_rt_task
rto_next_cpu tell_cpu_to_push
<-------------------------- atomic_inc(rto_loop_next)
rd->rto_loop != next
rto_next_cpu
irq_work_queue_on
rto_push_irq_work_func
Fix redundant self-IPI by filtering the initiating CPU in rto_next_cpu().
This solution has been verified to effectively eliminate spurious self-IPIs
and prevent CPU hardlockup scenarios. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: do not keep dest_dst if dev is going down
There is race between the netdev notifier ip_vs_dst_event()
and the code that caches dst with dev that is going down.
As the FIB can be notified for the closed device after our
handler finishes, it is possible valid route to be returned
and cached resuling in a leaked dev reference until the dest
is not removed.
To prevent new dest_dst to be attached to dest just after the
handler dropped the old one, add a netif_running() check
to make sure the notifier handler is not currently running
for device that is closing. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
This reverts commit 6946c726c3f4c36f0f049e6f97e88c510b15f65d.
Jean Delvare points out that the patch does not completely
fix the reported problem, that it in fact introduces a
(new) race condition, and that it may actually not be needed in
the first place.
Various AI reviews agree. Specific and relevant AI feedback:
"
This reordering sets the driver data to NULL before removing the sensor
attributes in the loop below.
ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but
does not check if it is NULL before dereferencing it to access
data->sensors[].
If a userspace process reads a sensor file (like temp1_input) while this
delete function is running, could it race with the dev_set_drvdata(...,
NULL) call here and crash in ibmpex_show_sensor()?
Would it be safer to keep the original order where device_remove_file() is
called before clearing the driver data? device_remove_file() should wait
for any active sysfs callbacks to complete, which might already prevent the
use-after-free this patch intends to fix.
"
Revert the offending patch. If it can be shown that the originally reported
alleged race condition does indeed exist, it can always be re-introduced
with a complete fix. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: always update mdb_n_entries for vlan contexts
syzbot triggered a warning[1] about the number of mdb entries in a context.
It turned out that there are multiple ways to trigger that warning today
(some got added during the years), the root cause of the problem is that
the increase is done conditionally, and over the years these different
conditions increased so there were new ways to trigger the warning, that is
to do a decrease which wasn't paired with a previous increase.
For example one way to trigger it is with flush:
$ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1
$ ip l add dumdum up master br0 type dummy
$ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1
$ ip link set dev br0 down
$ ip link set dev br0 type bridge mcast_vlan_snooping 1
^^^^ this will enable snooping, but will not update mdb_n_entries
because in __br_multicast_enable_port_ctx() we check !netif_running
$ bridge mdb flush dev br0
^^^ this will trigger the warning because it will delete the pg which
we added above, which will try to decrease mdb_n_entries
Fix the problem by removing the conditional increase and always keep the
count up-to-date while the vlan exists. In order to do that we have to
first initialize it on port-vlan context creation, and then always increase
or decrease the value regardless of mcast options. To keep the current
behaviour we have to enforce the mdb limit only if the context is port's or
if the port-vlan's mcast snooping is enabled.
[1]
------------[ cut here ]------------
n == 0
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043
Modules linked in:
CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline]
RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline]
RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825
Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b
RSP: 0018:ffffc9000c207220 EFLAGS: 00010293
RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c
R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800
R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238
FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0
Call Trace:
<TASK>
br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline]
br_mdb_flush net/bridge/br_mdb.c:1544 [inline]
br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561
rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1
rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socke
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't cache extent during splitting extent
Caching extents during the splitting process is risky, as it may result
in stale extents remaining in the status tree. Moreover, in most cases,
the corresponding extent block entries are likely already cached before
the split happens, making caching here not particularly useful.
Assume we have an unwritten extent, and then DIO writes the first half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, when ext4_split_extent_at() splits this extent, it truncates the
existing extent and then inserts a new one. During this process, this
extent status entry may be shrunk, and calls to ext4_find_extent() and
ext4_cache_extents() may occur, which could potentially insert the
truncated range as a hole into the extent status tree. After the split
is completed, this hole is not replaced with the correct status.
[UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUU|HHHHHHHH] extent status tree H: hole
Then, the outer calling functions will not correct this remaining hole
extent either. Finally, if we perform a delayed buffer write on this
latter part, it will re-insert the delayed extent and cause an error in
space accounting.
In adition, if the unwritten extent cache is not shrunk during the
splitting, ext4_cache_extents() also conflicts with existing extents
when caching extents. In the future, we will add checks when caching
extents, which will trigger a warning. Therefore, Do not cache extents
that are being split. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix race condition in QP timer handlers
I encontered the following warning:
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
libsha1 [last unloaded: ip6_udp_tunnel]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT
Tainted: [C]=CRAP
Hardware name: Raspberry Pi 4 Model B Rev 1.2
Call trace:
rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P)
retransmit_timer+0x130/0x188 [rdma_rxe]
call_timer_fn+0x68/0x4d0
__run_timers+0x630/0x888
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400
...
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400
The issue is caused by a race condition between retransmit_timer() and
rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping
to zero during timer handler execution.
It seems this warning is harmless because rxe_qp_do_cleanup() will flush
all pending timers and requests.
Example of flow causing the issue:
CPU0 CPU1
retransmit_timer() {
spin_lock_irqsave
rxe_destroy_qp()
__rxe_cleanup()
__rxe_put() // qp->ref_count decrease to 0
rxe_qp_do_cleanup() {
if (qp->valid) {
rxe_sched_task() {
WARN_ON(rxe_read(task->qp) <= 0);
}
}
spin_unlock_irqrestore
}
spin_lock_irqsave
qp->valid = 0
spin_unlock_irqrestore
}
Ensure the QP's reference count is maintained and its validity is checked
within the timer callbacks by adding calls to rxe_get(qp) and corresponding
rxe_put(qp) after use. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix memory leak in amdxdna_ubuf_map
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
In the mentioned "Fixes" commit, various work tasks triggering devlink
health reporter recovery were switched to use netdev_trylock to protect
against concurrent tear down of the channels being recovered. But this
had the side effect of introducing potential deadlocks because of
incorrect lock ordering.
The correct lock order is described by the init flow:
probe_one -> mlx5_init_one (acquires devlink lock)
-> mlx5_init_one_devl_locked -> mlx5_register_device
-> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe
-> register_netdev (acquires rtnl lock)
-> register_netdevice (acquires netdev lock)
=> devlink lock -> rtnl lock -> netdev lock.
But in the current recovery flow, the order is wrong:
mlx5e_tx_err_cqe_work (acquires netdev lock)
-> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report
-> devlink_health_report (acquires devlink lock => boom!)
-> devlink_health_reporter_recover
-> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx
-> mlx5e_tx_reporter_err_cqe_recover
The same pattern exists in:
mlx5e_reporter_rx_timeout
mlx5e_reporter_tx_ptpsq_unhealthy
mlx5e_reporter_tx_timeout
Fix these by moving the netdev_trylock calls from the work handlers
lower in the call stack, in the respective recovery functions, where
they are actually necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: pf1550: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path
icmp_route_lookup() performs multiple route lookups to find a suitable
route for sending ICMP error messages, with special handling for XFRM
(IPsec) policies.
The lookup sequence is:
1. First, lookup output route for ICMP reply (dst = original src)
2. Pass through xfrm_lookup() for policy check
3. If blocked (-EPERM) or dst is not local, enter "reverse path"
4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec
which reverses the original packet's flow (saddr<->daddr swapped)
5. If fl4_dec.saddr is local (we are the original destination), use
__ip_route_output_key() for output route lookup
6. If fl4_dec.saddr is NOT local (we are a forwarding node), use
ip_route_input() to simulate the reverse packet's input path
7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flag
The bug occurs in step 6: ip_route_input() is called with fl4_dec.daddr
(original packet's source) as destination. If this address becomes local
between the initial check and ip_route_input() call (e.g., due to
concurrent "ip addr add"), ip_route_input() returns a LOCAL route with
dst.output set to ip_rt_bug.
This route is then used for ICMP output, causing dst_output() to call
ip_rt_bug(), triggering a WARN_ON:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1275 at ip_rt_bug+0x21/0x30, CPU#1
Call Trace:
<TASK>
ip_push_pending_frames+0x202/0x240
icmp_push_reply+0x30d/0x430
__icmp_send+0x1149/0x24f0
ip_options_compile+0xa2/0xd0
ip_rcv_finish_core+0x829/0x1950
ip_rcv+0x2d7/0x420
__netif_receive_skb_one_core+0x185/0x1f0
netif_receive_skb+0x90/0x450
tun_get_user+0x3413/0x3fb0
tun_chr_write_iter+0xe4/0x220
...
Fix this by checking rt2->rt_type after ip_route_input(). If it's
RTN_LOCAL, the route cannot be used for output, so treat it as an error.
The reproducer requires kernel modification to widen the race window,
making it unsuitable as a selftest. It is available at:
https://gist.github.com/mrpre/eae853b72ac6a750f5d45d64ddac1e81 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device
hotplug safe") restructured the EEH driver to improve synchronization
with the PCI hotplug layer.
However, it inadvertently moved pci_lock_rescan_remove() outside its
intended scope in eeh_handle_normal_event(), leading to broken PCI
error reporting and improper EEH event triggering. Specifically,
eeh_handle_normal_event() acquired pci_lock_rescan_remove() before
calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts to
acquire the same lock internally, causing nested locking and disrupting
normal EEH event handling paths.
This patch adds a boolean parameter do_lock to _eeh_pe_bus_get(),
with two public wrappers:
eeh_pe_bus_get() with locking enabled.
eeh_pe_bus_get_nolock() that skips locking.
Callers that already hold pci_lock_rescan_remove() now use
eeh_pe_bus_get_nolock() to avoid recursive lock acquisition.
Additionally, pci_lock_rescan_remove() calls are restored to the correct
position—after eeh_pe_bus_get() and immediately before iterating affected
PEs and devices. This ensures EEH-triggered PCI removes occur under proper
bus rescan locking without recursive lock contention.
The eeh_pe_loc_get() function has been split into two functions:
eeh_pe_loc_get(struct eeh_pe *pe) which retrieves the loc for given PE.
eeh_pe_loc_get_bus(struct pci_bus *bus) which retrieves the location
code for given bus.
This resolves lockdep warnings such as:
<snip>
[ 84.964298] [ T928] ============================================
[ 84.964304] [ T928] WARNING: possible recursive locking detected
[ 84.964311] [ T928] 6.18.0-rc3 #51 Not tainted
[ 84.964315] [ T928] --------------------------------------------
[ 84.964320] [ T928] eehd/928 is trying to acquire lock:
[ 84.964324] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964342] [ T928]
but task is already holding lock:
[ 84.964347] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964357] [ T928]
other info that might help us debug this:
[ 84.964363] [ T928] Possible unsafe locking scenario:
[ 84.964367] [ T928] CPU0
[ 84.964370] [ T928] ----
[ 84.964373] [ T928] lock(pci_rescan_remove_lock);
[ 84.964378] [ T928] lock(pci_rescan_remove_lock);
[ 84.964383] [ T928]
*** DEADLOCK ***
[ 84.964388] [ T928] May be due to missing lock nesting notation
[ 84.964393] [ T928] 1 lock held by eehd/928:
[ 84.964397] [ T928] #0: c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964408] [ T928]
stack backtrace:
[ 84.964414] [ T928] CPU: 2 UID: 0 PID: 928 Comm: eehd Not tainted 6.18.0-rc3 #51 VOLUNTARY
[ 84.964417] [ T928] Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_022) hv:phyp pSeries
[ 84.964419] [ T928] Call Trace:
[ 84.964420] [ T928] [c0000011a7157990] [c000000001705de4] dump_stack_lvl+0xc8/0x130 (unreliable)
[ 84.964424] [ T928] [c0000011a71579d0] [c0000000002f66e0] print_deadlock_bug+0x430/0x440
[ 84.964428] [ T928] [c0000011a7157a70] [c0000000002fd0c0] __lock_acquire+0x1530/0x2d80
[ 84.964431] [ T928] [c0000011a7157ba0] [c0000000002fea54] lock_acquire+0x144/0x410
[ 84.964433] [ T928] [c0000011a7157cb0] [c0000011a7157cb0] __mutex_lock+0xf4/0x1050
[ 84.964436] [ T928] [c0000011a7157e00] [c000000000de21d8] pci_lock_rescan_remove+0x28/0x40
[ 84.964439] [ T928] [c0000011a7157e20] [c00000000004ed98] eeh_pe_bus_get+0x48/0xc0
[ 84.964442] [ T928] [c0000011a7157e50] [c00000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: revert commit_mutex usage in reset path
It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset
and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set'
rule run at the same time.
Previous patches made it safe to run individual reset handlers concurrently
so commit_mutex is no longer required to prevent this. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: reject zero-queue configuration from guest
A malicious or buggy Xen guest can write "0" to the xenbus key
"multi-queue-num-queues". The connect() function in the backend only
validates the upper bound (requested_num_queues > xenvif_max_queues)
but not zero, allowing requested_num_queues=0 to reach
vzalloc(array_size(0, sizeof(struct xenvif_queue))), which triggers
WARN_ON_ONCE(!size) in __vmalloc_node_range().
On systems with panic_on_warn=1, this allows a guest-to-host denial
of service.
The Xen network interface specification requires
the queue count to be "greater than zero".
Add a zero check to match the validation already present
in xen-blkback, which has included this
guard since its multi-queue support was added. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bpf_xdp_store_bytes proto for read-only arg
While making some maps in Cilium read-only from the BPF side, we noticed
that the bpf_xdp_store_bytes proto is incorrect. In particular, the
verifier was throwing the following error:
; ret = ctx_store_bytes(ctx, l3_off + offsetof(struct iphdr, saddr),
&nat->address, 4, 0);
635: (79) r1 = *(u64 *)(r10 -144) ; R1=ctx() R10=fp0 fp-144=ctx()
636: (b4) w2 = 26 ; R2=26
637: (b4) w4 = 4 ; R4=4
638: (b4) w5 = 0 ; R5=0
639: (85) call bpf_xdp_store_bytes#190
write into map forbidden, value_size=6 off=0 size=4
nat comes from a BPF_F_RDONLY_PROG map, so R3 is a PTR_TO_MAP_VALUE.
The verifier checks the helper's memory access to R3 in
check_mem_size_reg, as it reaches ARG_CONST_SIZE argument. The third
argument has expected type ARG_PTR_TO_UNINIT_MEM, which includes the
MEM_WRITE flag. The verifier thus checks for a BPF_WRITE access on R3.
Given R3 points to a read-only map, the check fails.
Conversely, ARG_PTR_TO_UNINIT_MEM can also lead to the helper reading
from uninitialized memory.
This patch simply fixes the expected argument type to match that of
bpf_skb_store_bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq25980: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
The address watch clear code receives watch_id as an unsigned value
(u32), but some helper functions were using a signed int and checked
bits by shifting with watch_id.
If a very large watch_id is passed from userspace, it can be converted
to a negative value. This can cause invalid shifts and may access
memory outside the watch_points array.
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before
using it. Also use BIT(watch_id) to test and clear bits safely.
This keeps the behavior unchanged for valid watch IDs and avoids
undefined behavior for invalid ones.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448
kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow
'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c
433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd,
434 uint32_t watch_id)
435 {
436 int r;
437
438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id))
kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if
watch_id is larger than INT_MAX it leads to a buffer overflow.
(Negative shifts are undefined).
439 return -EINVAL;
440
441 if (!pdd->dev->kfd->shared_resources.enable_mes) {
442 r = debug_lock_and_unmap(pdd->dev->dqm);
443 if (r)
444 return r;
445 }
446
447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false);
--> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch(
449 pdd->dev->adev,
450 watch_id);
v2: (as per, Jonathan Kim)
- Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to
match the clear path.
- Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
alloc_gcs() returns an error-encoded pointer on failure, which comes
from do_mmap(), not NULL.
The current NULL check fails to detect errors, which could lead to using
an invalid GCS address.
Use IS_ERR_VALUE() to properly detect errors, consistent with the
check in gcs_alloc_thread_stack(). |
