| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Consume the locked rmap value in the lockless rmap walk
__kvm_rmap_lock() deliberately elides the rmap lock when it observes an
empty rmap. In that case kvm_rmap_lock_readonly() also re-enables
preemption and returns zero, so the caller holds neither the rmap lock
nor a preemption reference. The elision documents the invariant it
relies on:
* Elide the lock if the rmap is empty, as lockless walkers (read-only
* mode) don't need to (and can't) walk an empty rmap, nor can they add
* entries to the rmap. I.e. the only paths that process empty rmaps
* do so while holding mmu_lock for write, and are mutually exclusive.
kvm_rmap_age_gfn_range() ignores the returned value and unconditionally
enters for_each_rmap_spte_lockless(). The iterator started with
rmap_get_first(), which re-reads rmap_head->val rather than using the
value returned by the lock. If a writer populates the rmap between the
lock's read and the iterator's re-read, the aging path walks the newly
installed rmap without holding its lock.
For a KVM_RMAP_MANY rmap this leaves the walker following a
pte_list_desc chain that it never locked. A writer holding mmu_lock for
write may free that chain (e.g. kvm_zap_all_rmap_sptes() on the recycle
path, or any rmap zap) via kmem_cache_free() while the walk is in
progress, giving a slab use-after-free. Nothing serialises the two: the
aging path runs without mmu_lock when CONFIG_KVM_MMU_LOCKLESS_AGING=y,
and the rmap lock that would otherwise exclude the writer was elided.
Because the empty path re-enables preemption, the interval between the
two reads can span an arbitrary scheduling delay.
Fix the class of bug by having the lockless walk consume the value
returned by the lock instead of re-reading the rmap. Split
rmap_get_first() into __rmap_get_first(), which starts an iterator from
an already-read rmap value, and make for_each_rmap_spte_lockless() take
that value and call __rmap_get_first() directly.
kvm_rmap_age_gfn_range() passes the value returned by
kvm_rmap_lock_readonly(): when the lock was elided the value is zero,
__rmap_get_first() returns NULL, and the walk is skipped. No lockless
walker re-reads the rmap, so the lock-elision invariant cannot be
violated, and no lock()-without-paired-unlock() path is added to the
aging code. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Service local TLB flushes on failed nested VM-Enter
KVM services local TLB flushes on "full" nested VM-Exits (through
__nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to
failed VMCS checks in nested_vmx_enter_non_root_mode()).
However, it is possible that KVM had queued TLB flushes that need to be
performed, even if the nested VM-Enter was not successful. For example,
if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if
via the MSR load lists, as the SDM says:
If any MSR is being loaded in such a way that would architecturally
require a TLB flush, the TLBs are updated so that, after VM entry, the
logical processor will not use any translations that were cached before
the transition.
The SDM is unclear about when the TLB flush should occur, and whether or
not a failed VM entry would flush the TLB, so it is safer to always
do the TLB flush in this case.
More concretely, KVM also updates the last VPID L1 used for L2 in
nested_vmx_transition_tlb_flush() (i.e. last_vpid), even if the VM entry
ultimately fails. With the current code, KVM could miss a TLB flush if
L1 changes L2's VPID, then does a failed VM entry followed by a
successful one, as the failed VM entry would update last_vpid but not
actually flush the TLB. Servicing local TLB flushes on failed VM entries
makes sure that the TLB is always flushed when last_vpid is updated. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit
Always check and clear KVM_REQ_GET_NESTED_STATE_PAGES when emulating a
nested VM-Exit to ensure the request is cleared, even when KVM was built
with CONFIG_KVM_HYPERV=n, as KVM subtly relies on the "check" to clear
the flag and thus avoid double-mapping the vmcs12 pages, e.g. if KVM
manages to bail from VM-Enter without processing the request, and then
emulates VMLAUNCH or VMRESUME. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: ltrf216a: fix runtime PM reference leak in error path
ltrf216a_get_lux() acquires a runtime PM reference by calling
ltrf216a_set_power_state(data, true). However, if
ltrf216a_read_data() fails, the function returns immediately without
dropping the reference.
This leaves the runtime PM usage count unbalanced, preventing the device
from autosuspending after a failed read.
Fix this by releasing the runtime PM reference before returning from the
error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
apds9306_read_data() calls pm_runtime_resume_and_get() but several
error paths return directly without calling pm_runtime_put_autosuspend(),
leaking the runtime PM reference and preventing the device from
autosuspending.
Use PM_RUNTIME_ACQUIRE_AUTOSUSPEND() and PM_RUNTIME_ACQUIRE_ERR() to
automatically handle runtime PM reference release on all return paths. |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, the SSE client→server POST endpoints are `@csrf_exempt` and the SSE GET stream endpoint had no Origin check, so a cross-origin page could drive a victim-cookie-authenticated SSE session: force the victim's browser to GET the stream URL (which creates and mounts a LiveView as the victim) and POST to the message endpoint with `credentials: include` to fire state-changing event handlers as the victim. The URL `session_id` is client-chosen (validated only for UUID *format*), so it is not a CSRF token, and a JSON body sent as `text/plain` is a CORS simple request with no preflight. The issue is fixed in 1.0.7. All three SSE endpoints validate the request `Origin` against `ALLOWED_HOSTS` (mirroring the WebSocket CSWSH defense) and reject cross-origin requests with 403; the POST endpoints additionally require `Content-Type: application/json` (415 otherwise), closing the `text/plain` simple-request bypass. As a workaround, disable the SSE transport, or front it with a proxy that enforces an Origin allowlist. |
| Nango through 0.70.4 fails to validate caller-supplied connection configuration values interpolated into provider token and proxy URL templates. Authenticated attackers can supply malicious configuration values to direct server requests at internal addresses or cloud metadata endpoints, potentially exfiltrating provider credentials. |
| HCL BigFix Service Management is affected by Cross-Site Scripting (XSS) vulnerability, which could allow an attacker to inject unsanitized malicious scripts that execute in a victim's browser, enabling session hijacking, account takeover, and unauthorized actions on behalf of affected users. |
| HCL BigFix Service Management is affected by a high-severity Broken Access Control vulnerability, which could allow a low-privileged user to gain unauthorized access to administrative screens and functions reserved for higher-privileged roles. |
| HCL BigFix Service Management is affected by SQL Injection flaw and a Cross-Tenant Data Exposure flaw vulnerabilities. which could allow an authenticated attacker to inject database commands to extract sensitive system details, as well as manipulate request values to gain unauthorized access to full personal profile data and PII across different organizations. |
| HCL BigFix Service Management is affected by a Server-Side Request Forgery (SSRF) vulnerability in its search functionality, which could allow an attacker to force the application server to send requests to internal systems that are not accessible from the internet. |
| Authorization bypass through User-Controlled key vulnerability in TECHIN2B TECHIN2B Application allows Privilege Abuse.
This issue affects TECHIN2B Application: from V1.0.7676.13 through 18092026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
The atlas driver requests its hardware data-ready IRQ with
devm_request_threaded_irq(); its threaded handler queues an irq_work,
atlas_work_handler(), that calls iio_trigger_poll(data->trig).
The IRQ is devm-managed, so free_irq() runs from the devres unwind after
atlas_remove() returns without flushing that irq_work. Once a buffer is
enabled, conversion-complete IRQs keep firing and queueing it; a pending
irq_work can therefore run after the unwind has freed atlas_data/indio_dev
and the trigger, when atlas_work_handler() derives the atlas_data pointer
via container_of() and dereferences data->trig, a use-after-free.
Call iio_trigger_poll_nested() directly from the threaded handler instead
of bouncing through irq_work. free_irq() then drains the threaded handler,
closing the window; other iio drivers with a threaded data-ready IRQ do the
same (e.g. bmi270).
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix potential use-after-free in anonymous buffer release
An anonymous buffer handle holds a reference to the underlying IIO device.
The reference is dropped in the buffer handle's release function. If the
device has been removed, either through unbind or hot-unplug, the buffer
handle might hold the last reference.
The release function takes the mutex for the buffer using a guard, which
means the unlock happens after all the code in the function, including
`iio_device_put()`. If the anonymous buffer holds the last reference this
might free both the IIO device and the buffer, which contains the mutex,
leading to use-after-free when the mutex is unlocked.
Fix this by using a scoped guard just around the buffer dmabuf list access,
making sure the mutex is unlocked before releasing the IIO device.
Version 10 of the patch that introduced this issue used this exact scheme
of first unlocking and then dropping the reference [1]. During review it
was suggested to use a guard instead, and version 11 made that change [2]. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: meson: align gxbb_32k_clk_sel number of parents with actual count
The following out-of-bounds read has been observed by Christian on a
GXBB WeTek Hub:
==================================================================
BUG: KASAN: global-out-of-bounds in __clk_register+0x1b70/0x2418
Read of size 8 at addr ffffd66320cf88e0 by task swapper/0/1
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc5 #1 PREEMPT
Hardware name: WeTek Hub (DT)
Call trace:
show_stack+0x14/0x20 (C)
dump_stack_lvl+0x74/0x94
print_report+0x164/0x4b0
kasan_report+0x98/0xd8
__asan_report_load8_noabort+0x1c/0x24
__clk_register+0x1b70/0x2418
devm_clk_hw_register+0x74/0x15c
meson_clkc_init+0xd4/0x20c
meson_clkc_syscon_probe+0x5c/0x94
platform_probe+0xbc/0x17c
really_probe+0x184/0x844
__driver_probe_device+0x154/0x35c
driver_probe_device+0x60/0x188
__driver_attach+0x168/0x4a0
bus_for_each_dev+0xec/0x180
driver_attach+0x38/0x58
bus_add_driver+0x238/0x4c0
driver_register+0x150/0x388
__platform_driver_register+0x54/0x7c
gxbb_clkc_driver_init+0x18/0x20
do_one_initcall+0xb8/0x340
kernel_init_freeable+0x49c/0x52c
kernel_init+0x24/0x148
ret_from_fork+0x10/0x20
The buggy address belongs to the variable:
gxbb_32k_clk_parents+0x60/0x400
The buggy address belongs to a vmalloc virtual mapping
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffffd66320cf8780: 00 00 00 00 f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9
ffffd66320cf8800: 00 04 f9 f9 f9 f9 f9 f9 00 04 f9 f9 f9 f9 f9 f9
>ffffd66320cf8880: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9
^
ffffd66320cf8900: 00 01 f9 f9 f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9
ffffd66320cf8980: 00 00 02 f9 f9 f9 f9 f9 00 00 02 f9 f9 f9 f9 f9
==================================================================
Commit 7915d7d5407c ("clk: amlogic: gxbb: drop non existing 32k clock
parent") dropped a non-existing clock parent from the gxbb_32k_clk_sel
mux but didn't adjust the hard-coded num_parents field. Fix the actual
number of parents of that mux by using ARRAY_SIZE instead (avoiding
similar problems in future). |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: fix freeing of claims on meshif deletion
When the mesh interface is getting deleted, then
batadv_bla_del_backbone_claims() (via batadv_bla_purge_backbone_gw()) could
make sure that all claims gets removed. But this function is only executed
when bat_priv->bla.claim_hash is not NULL. And since batadv_bla_free() is
always setting it to NULL before it is (indirectly) called, it was never
actually executed.
But the batadv_bla_purge_claims() -> batadv_handle_unclaim() is at the
moment too fragile because the BLA code is not handling the rehashing in
batadv_bla_update_orig_address(). The stored backbone address doesn't have
to be the one actually used for the hash bucket selection during the
initial adding of the backbone. The batadv_handle_unclaim() can therefore
fail to find the respective backbone for the unclaim and then stop the
deletion.
But the actual backbone_gw object is not needed for the unclaim because all
relevant information is always provided by the caller. And the check for
the existence of the backbone_gw doesn't provide any additional security
check for the deletion of a claim. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: avoid unaligned fault in IP extraction
Independent of the alignment of the ARP packet in the SKB, either the
batadv_arp_ip_src or the batadv_arp_ip_dst will have an unaligned access
(on HW without native unaligned read support).
Use get_unaligned() to handle this properly on all architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix stale receive device on merged fragments
Fragment reassembly reuses the skb from the highest-numbered buffered
fragment as the merged packet. When that fragment was received on a hard
interface which is deleted before the chain completes, the merged skb can
re-enter the receive path with a stale skb->dev and skb_iif.
batadv_batman_skb_recv() passes such merged packets through the normal
receive handlers again. DAT and bridge loop avoidance both derive the ARP
header length from skb->dev, so they can dereference the freed net_device
before the packet reaches the local mesh interface.
Refresh the receive device metadata from the current receive device before
running the packet handlers. This keeps internally reinjected merged
fragments consistent with the normal receive path after hard interface
teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Take trace_array reference before accessing its ftrace_ops
The trace instance files set_ftrace_filter and set_ftrace_notrace was
updated to work with specific trace instances (trace_arrays). The issue is
that when these files are opened, there is a small race window where it
will use the ftrace_ops from the inode->private pointer to get a reference
to the trace_array and then take its reference. The problem is that the
ftrace_ops itself could be freed. If the rmdir on the instance happens at
the same time the set_ftrace_filter file is opened, the rmdir could have
also freed the ftrace_ops and referencing it will cause a use-after-free
bug and crash the kernel.
Instead, pass in the trace_array as the file private data (NULL for the
top level instance), and then pass both the trace_array and the ftrace_ops
to the ftrace_regex_open() function. If the trace_array is NULL, then it
just uses the ftrace_ops without the need to take its reference (like
normal). If the ftrace_ops is NULL, that is only the case for the top
level instance and the global_ops can be used.
This allows the trace_array to have its reference incremented before
touching the ftrace_ops that could also be freed when the instance is. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent rcuwait use-after-free during requeue PI
On PREEMPT_RT, FUTEX_CMP_REQUEUE_PI can trigger a KASAN report
(slab-out-of-bounds) in futex_requeue_pi_complete() invocation of
rcuwait_wake_up().
The futex_q used by futex_wait_requeue_pi() is allocated on the waiter's
stack. An early wakeup can race with a PI requeue as follows:
waiter requeue task
------ ------------
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_IN_PROGRESS
* timeout/ signal wakes waiter *
futex_requeue_pi_wakeup_sync()
Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_WAIT
requeue_pi_wake_futex
futex_requeue_pi_complete()
cmpxchg Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_LOCKED
rcuwait_wait_event()
if (atomic_read(&q->requeue_state) != Q_REQUEUE_PI_WAIT)
break /* no schedule() */
/* q.pi_state->owner == current */
futex_private_hash_put()
/* return from syscall */
rcuwait_wake_up(&q->requeue_wait)
/* q is gone */
futex_requeue_pi_complete() publishes Q_REQUEUE_PI_LOCKED before
calling rcuwait_wake_up(). The waiter observes this state in
rcuwait_wait_event() before invoking schedule() in rcuwait_wait_event().
Here, the waiter is free leave the syscall before requeue task can
complete the wake.
To address this race skip rcuwait_wake_up() in the Q_REQUEUE_PI_LOCKED
case.
This state is only published by requeue_pi_wake_futex(), which saves
q->task before futex_requeue_pi_complete() and wakes the waiter via
wake_up_state().
This wake is intended to wake the waiter from its futex_do_wait() sleep.
If the waiter is still sleeping there, it can not get into the
Q_REQUEUE_PI_WAIT state (and require this removed wake).
Should the waiter be woken up from futex_do_wait() by other means (as in
this example) and sleep in futex_requeue_pi_wakeup_sync() then the
wake_up_state() from requeue_pi_wake_futex() will wake it, too.
Should the waiter task terminate before wake_up_state() had a chance to
wake the task then the task pointer does not become invalid because the
futex_hash_bucket::lock is held and the task pointer is RCU protected.
[bigeasy: Updated comment and commit message] |
