| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in codeplex-codehaus. A directory traversal attack (also known as path traversal) aims to access files and directories stored outside the intended folder. By manipulating files with "dot-dot-slash (../)" sequences and their variations or by using absolute file paths, it may be possible to access arbitrary files and directories stored on the file system, including application source code, configuration, and other critical system files. |
| An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Lock TPM chip in tpm_pm_suspend() first
Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy
according, as this leaves window for tpm_hwrng_read() to be called while
the operation is in progress. The recent bug report gives also evidence of
this behaviour.
Aadress this by locking the TPM chip before checking any chip->flags both
in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED
check inside tpm_get_random() so that it will be always checked only when
the lock is reserved. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: TAS2781: Fix tasdev_load_calibrated_data()
This function has a reversed if statement so it's either a no-op or it
leads to a NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Check socket flag instead of hcon
This fixes the following Smatch static checker warning:
net/bluetooth/iso.c:1364 iso_sock_recvmsg()
error: we previously assumed 'pi->conn->hcon' could be null (line 1359)
net/bluetooth/iso.c
1347 static int iso_sock_recvmsg(struct socket *sock, struct msghdr *msg,
1348 size_t len, int flags)
1349 {
1350 struct sock *sk = sock->sk;
1351 struct iso_pinfo *pi = iso_pi(sk);
1352
1353 BT_DBG("sk %p", sk);
1354
1355 if (test_and_clear_bit(BT_SK_DEFER_SETUP,
&bt_sk(sk)->flags)) {
1356 lock_sock(sk);
1357 switch (sk->sk_state) {
1358 case BT_CONNECT2:
1359 if (pi->conn->hcon &&
^^^^^^^^^^^^^^ If ->hcon is NULL
1360 test_bit(HCI_CONN_PA_SYNC,
&pi->conn->hcon->flags)) {
1361 iso_conn_big_sync(sk);
1362 sk->sk_state = BT_LISTEN;
1363 } else {
--> 1364 iso_conn_defer_accept(pi->conn->hcon);
^^^^^^^^^^^^^^
then we're toast
1365 sk->sk_state = BT_CONFIG;
1366 }
1367 release_sock(sk);
1368 return 0;
1369 case BT_CONNECTED:
1370 if (test_bit(BT_SK_PA_SYNC, |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING
Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with
small possibility, the root cause is exactly the same as commit
bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
However, Dan reported another hang after that, and junxiao investigated
the problem and found out that this is caused by plugged bio can't issue
from raid5d().
Current implementation in raid5d() has a weird dependence:
1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear
MD_SB_CHANGE_PENDING;
2) raid5d() handles IO in a deadloop, until all IO are issued;
3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared;
This behaviour is introduce before v2.6, and for consequence, if other
context hold 'reconfig_mutex', and md_check_recovery() can't update
super_block, then raid5d() will waste one cpu 100% by the deadloop, until
'reconfig_mutex' is released.
Refer to the implementation from raid1 and raid10, fix this problem by
skipping issue IO if MD_SB_CHANGE_PENDING is still set after
md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex'
is released. Meanwhile, the hang problem will be fixed as well. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find()
Syzbot reports a warning as follows:
============================================
WARNING: CPU: 0 PID: 5075 at fs/mbcache.c:419 mb_cache_destroy+0x224/0x290
Modules linked in:
CPU: 0 PID: 5075 Comm: syz-executor199 Not tainted 6.9.0-rc6-gb947cc5bf6d7
RIP: 0010:mb_cache_destroy+0x224/0x290 fs/mbcache.c:419
Call Trace:
<TASK>
ext4_put_super+0x6d4/0xcd0 fs/ext4/super.c:1375
generic_shutdown_super+0x136/0x2d0 fs/super.c:641
kill_block_super+0x44/0x90 fs/super.c:1675
ext4_kill_sb+0x68/0xa0 fs/ext4/super.c:7327
[...]
============================================
This is because when finding an entry in ext4_xattr_block_cache_find(), if
ext4_sb_bread() returns -ENOMEM, the ce's e_refcnt, which has already grown
in the __entry_find(), won't be put away, and eventually trigger the above
issue in mb_cache_destroy() due to reference count leakage.
So call mb_cache_entry_put() on the -ENOMEM error branch as a quick fix. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: pcie: handle randbuf allocation failure
The kzalloc() in brcmf_pcie_download_fw_nvram() will return null
if the physical memory has run out. As a result, if we use
get_random_bytes() to generate random bytes in the randbuf, the
null pointer dereference bug will happen.
In order to prevent allocation failure, this patch adds a separate
function using buffer on kernel stack to generate random bytes in
the randbuf, which could prevent the kernel stack from overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Add a timeout to acquire the command queue semaphore
Prevent forced completion handling on an entry that has not yet been
assigned an index, causing an out of bounds access on idx = -22.
Instead of waiting indefinitely for the sem, blocking flow now waits for
index to be allocated or a sem acquisition timeout before beginning the
timer for FW completion.
Kernel log example:
mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix a possible memleak in tipc_buf_append
__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: reset ptes when close() for wr-protected ones
Userfaultfd unregister includes a step to remove wr-protect bits from all
the relevant pgtable entries, but that only covered an explicit
UFFDIO_UNREGISTER ioctl, not a close() on the userfaultfd itself. Cover
that too. This fixes a WARN trace.
The only user visible side effect is the user can observe leftover
wr-protect bits even if the user close()ed on an userfaultfd when
releasing the last reference of it. However hopefully that should be
harmless, and nothing bad should happen even if so.
This change is now more important after the recent page-table-check
patch we merged in mm-unstable (446dd9ad37d0 ("mm/page_table_check:
support userfault wr-protect entries")), as we'll do sanity check on
uffd-wp bits without vma context. So it's better if we can 100%
guarantee no uffd-wp bit leftovers, to make sure each report will be
valid. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921e: fix use-after-free in free_irq()
From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test
to make sure the shared irq handler should be able to handle the unexpected
event after deregistration. For this case, let's apply MT76_REMOVED flag to
indicate the device was removed and do not run into the resource access
anymore.
BUG: KASAN: use-after-free in mt7921_irq_handler+0xd8/0x100 [mt7921e]
Read of size 8 at addr ffff88824a7d3b78 by task rmmod/11115
CPU: 28 PID: 11115 Comm: rmmod Tainted: G W L 5.17.0 #10
Hardware name: Micro-Star International Co., Ltd. MS-7D73/MPG B650I
EDGE WIFI (MS-7D73), BIOS 1.81 01/05/2024
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x1f/0x190
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
kasan_report.cold+0x7f/0x11b
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
mt7921_irq_handler+0xd8/0x100 [mt7921e]
free_irq+0x627/0xaa0
devm_free_irq+0x94/0xd0
? devm_request_any_context_irq+0x160/0x160
? kobject_put+0x18d/0x4a0
mt7921_pci_remove+0x153/0x190 [mt7921e]
pci_device_remove+0xa2/0x1d0
__device_release_driver+0x346/0x6e0
driver_detach+0x1ef/0x2c0
bus_remove_driver+0xe7/0x2d0
? __check_object_size+0x57/0x310
pci_unregister_driver+0x26/0x250
__do_sys_delete_module+0x307/0x510
? free_module+0x6a0/0x6a0
? fpregs_assert_state_consistent+0x4b/0xb0
? rcu_read_lock_sched_held+0x10/0x70
? syscall_enter_from_user_mode+0x20/0x70
? trace_hardirqs_on+0x1c/0x130
do_syscall_64+0x5c/0x80
? trace_hardirqs_on_prepare+0x72/0x160
? do_syscall_64+0x68/0x80
? trace_hardirqs_on_prepare+0x72/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
inet: read sk->sk_family once in inet_recv_error()
inet_recv_error() is called without holding the socket lock.
IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM
socket option and trigger a KCSAN warning. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: fix NEXTHDR_FRAGMENT handling in ip6_tnl_parse_tlv_enc_lim()
syzbot pointed out [1] that NEXTHDR_FRAGMENT handling is broken.
Reading frag_off can only be done if we pulled enough bytes
to skb->head. Currently we might access garbage.
[1]
BUG: KMSAN: uninit-value in ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0
ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0
ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline]
ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137
ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:451 [inline]
ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155
ip6_send_skb net/ipv6/ip6_output.c:1952 [inline]
ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972
rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582
rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920
inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
__kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc_node_track_caller+0x118/0x3c0 mm/slab_common.c:1027
kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
pskb_expand_head+0x226/0x1a00 net/core/skbuff.c:2098
__pskb_pull_tail+0x13b/0x2310 net/core/skbuff.c:2655
pskb_may_pull_reason include/linux/skbuff.h:2673 [inline]
pskb_may_pull include/linux/skbuff.h:2681 [inline]
ip6_tnl_parse_tlv_enc_lim+0x901/0xbb0 net/ipv6/ip6_tunnel.c:408
ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline]
ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137
ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:451 [inline]
ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155
ip6_send_skb net/ipv6/ip6_output.c:1952 [inline]
ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972
rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582
rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920
inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendms
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/ASPM: Fix deadlock when enabling ASPM
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix UaF in netns ops registration error path
If net_assign_generic() fails, the current error path in ops_init() tries
to clear the gen pointer slot. Anyway, in such error path, the gen pointer
itself has not been modified yet, and the existing and accessed one is
smaller than the accessed index, causing an out-of-bounds error:
BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320
Write of size 8 at addr ffff888109124978 by task modprobe/1018
CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x9f
print_address_description.constprop.0+0x86/0x2b5
print_report+0x11b/0x1fb
kasan_report+0x87/0xc0
ops_init+0x2de/0x320
register_pernet_operations+0x2e4/0x750
register_pernet_subsys+0x24/0x40
tcf_register_action+0x9f/0x560
do_one_initcall+0xf9/0x570
do_init_module+0x190/0x650
load_module+0x1fa5/0x23c0
__do_sys_finit_module+0x10d/0x1b0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f42518f778d
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48
89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d
RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003
RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000
</TASK>
This change addresses the issue by skipping the gen pointer
de-reference in the mentioned error-path.
Found by code inspection and verified with explicit error injection
on a kasan-enabled kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context
Indirection (*) is of lower precedence than postfix increment (++). Logic
in napi_poll context would cause an out-of-bound read by first increment
the pointer address by byte address space and then dereference the value.
Rather, the intended logic was to dereference first and then increment the
underlying value. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix memleak when more than 255 elements expired
When more than 255 elements expired we're supposed to switch to a new gc
container structure.
This never happens: u8 type will wrap before reaching the boundary
and nft_trans_gc_space() always returns true.
This means we recycle the initial gc container structure and
lose track of the elements that came before.
While at it, don't deref 'gc' after we've passed it to call_rcu. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix OOB read
If the index provided by the user is bigger than the mask size, we might do
an out of bound read. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()
After the commit in Fixes:, if a module that created a slab cache does not
release all of its allocated objects before destroying the cache (at rmmod
time), we might end up releasing the kmem_cache object without removing it
from the slab_caches list thus corrupting the list as kmem_cache_destroy()
ignores the return value from shutdown_cache(), which in turn never removes
the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails
to release all of the cache's slabs.
This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y
as after that ill release the system will immediately trip on list_add,
or list_del, assertions similar to the one shown below as soon as another
kmem_cache gets created, or destroyed:
[ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268)
[ 1041.219165] ------------[ cut here ]------------
[ 1041.221517] kernel BUG at lib/list_debug.c:62!
[ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15
[ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023
[ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0
Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y,
is to set slub_debug to poison the released objects and then just run
cat /proc/slabinfo after removing the module that leaks slab objects,
in which case the kernel will panic:
[ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI
[ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15
[ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023
[ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0
This patch fixes this issue by properly checking shutdown_cache()'s
return value before taking the kmem_cache_release() branch. |