| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Premium Packages – Sell Digital Products Securely plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'checkout[billing][phone] (and state / taxid / email)' parameter in all versions up to, and including, 7.2.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Validate PCI BAR size before mapping
The amd_sfh driver maps PCI BAR 2 using pcim_iomap_regions() and
subsequently accesses MMIO registers at offsets up to 0x10958 (e.g.,
AMD_P2C_MSG3 at 0x1068C). However, the driver never validates that the BAR
size is large enough to cover these accesses. If the driver is bound to a
device with a smaller BAR 2, this leads to an out-of-bounds memory access
and a page fault during the probe function.
For example, a page fault can occur when reading from privdata->mmio +
AMD_P2C_MSG3 in mp2_select_ops():
BUG: unable to handle page fault for address: ffffc9000390368c
PGD 100000067 P4D 100000067 PUD 1012c1067 PMD 105b64067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:mp2_select_ops drivers/hid/amd-sfh-hid/amd_sfh_pcie.c:282
[inline]
RIP: 0010:amd_mp2_pci_probe+0x337/0x5f0
drivers/hid/amd-sfh-hid/amd_sfh_pcie.c:487
Call Trace:
<TASK>
local_pci_probe drivers/pci/pci-driver.c:332 [inline]
pci_call_probe drivers/pci/pci-driver.c:394 [inline]
__pci_device_probe drivers/pci/pci-driver.c:455 [inline]
pci_device_probe+0x431/0xc90 drivers/pci/pci-driver.c:489
Fix this by verifying that the length of BAR 2 is at least 128KB before
attempting to map it. Since the maximum accessed offset is 0x10958, and PCI
BAR sizes are powers of 2, any legitimate hardware will have a BAR size of
at least 128KB. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: pac1934: check ACPI label duplication
A label duplication failure currently reaches the terminating-byte
write. Release the ACPI result and abort before accessing the missing
label; earlier labels are managed by devres.
Detected by static analysis and reviewed with AI-assisted source auditing. |
| A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames. |
| A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory). |
| An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution. |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. |
| A flaw was found in oc-mirror's legacy v1 catalog cache rebuild. When the --build-catalog-cache flag is used, oc-mirror extracts an opm binary from the remote operator catalog image and executes it on the host without verifying its signature, digest, or integrity. An attacker who publishes a malicious catalog image to a registry could supply a trojanized opm binary that is executed with the privileges of the user running oc-mirror, resulting in arbitrary code execution on the mirroring host. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Kylin. Special parameter in JDBC URL can lead to code injection.
Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| A vulnerability was determined in ztxz16 fastllm up to 0.1.8.2. This impacts the function GGUFBuffer::ReadString of the file third_party/gguf/gguf.cpp of the component String Parsing. This manipulation of the argument len causes buffer overflow. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: publish HW_DEAD after worker is done
flow_offload_work_del() sets NF_FLOW_HW_DEAD before the work handler
clears NF_FLOW_HW_PENDING. Once a flow is both HW_DYING and HW_DEAD, a
concurrent garbage collection pass can remove it and schedule it for RCU
freeing.
The offload worker holds neither an RCU read lock nor a reference to the
flow. If it is preempted after publishing HW_DEAD, the RCU callback can
free the flow before the worker resumes and clears HW_PENDING, resulting
in a use-after-free.
Move HW_DEAD publication to the common worker epilogue after the pending
bit is cleared, making it the final flow access by destroy work. Order all
preceding flow accesses before publishing the bit that allows garbage
collection to free the object. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: set up the frame pointer for the exception callback
A program acting as exception boundary saves all callee-saved registers,
so build_prologue() takes the exception_cb path and never calls
push_callee_regs(). That is the only place find_used_callee_regs() runs,
and with it the only place ctx->fp_used is set, so the callback prologue
does not emit the
mov x25, sp
that points BPF_REG_FP at the frame the callback runs on. x25 keeps
whatever it held when bpf_throw() was called. If the throw came from a
subprogram that uses its own BPF stack, that is the subprogram's frame
pointer, and since the subprogram never returns it never restores x25
either.
Stack accesses through BPF_REG_FP are rewritten to be stack pointer
relative, so those still land in the callback's own frame. Materializing
the register does not: a callback that passes the address of a local
variable to a helper hands over an address in the dead subprogram's
frame. That address is below the callback's stack pointer by then, and
the helper's own call chain covers it, so the helper can write over its
own return address. 0x1234 below is the value the helper was asked to
store:
pc : 0x1234
lr : 0x1234
Call trace:
0x1234 (P)
bpf_test_run+0x188/0x3e0
bpf_prog_test_run_skb+0x47c/0x998
__sys_bpf+0xbdc/0xdd8
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Set ctx->fp_used on the exception callback path so that the existing code
further down sets x25 from the stack pointer. The epilogue restores it
from the main program's save area along with the other callee-saved
registers, as it already does. x86 sets the frame pointer for the
callback from the argument it is passed, and powerpc computes it from
the stack pointer. |
| A flaw was found in Feast. An authorization bypass vulnerability exists in the /materialize and /materialize-incremental endpoints. By sending a specially crafted request that omits the feature_views field, an attacker can bypass intended permission checks. This allows an unauthenticated remote attacker, or any authenticated user, to trigger a full re-materialization of all feature views. The consequence is a Denial of Service (DoS) due to data corruption and significant resource consumption across all tenants. |
| A flaw was found in Feast and feast-operator. The default configuration for both the Feast SDK and the feast-operator is "no_auth," meaning no security manager is installed. This default allows unauthenticated and unauthorized access to feature-server, registry-server, and offline-server endpoints. A remote attacker, by exploiting this missing authentication, could achieve remote code execution (RCE) by storing a malicious User-Defined Function (UDF) on the feature-server, trigger a denial of service (DoS) by forcing re-materialization of all tenant features, and gain unauthorized access to cross-tenant data. |
| A flaw was found in Data Science Pipelines (DSP). An attacker with namespace editor privileges can bypass security hardening by submitting a malicious Argo Workflow through the V1 API path. This allows the API server to create pods with elevated privileges, acting as a 'confused deputy' on behalf of the attacker. Successful exploitation grants the attacker node-root access, enabling arbitrary code execution and full control over the underlying node. |
| A flaw was found in the Red Hat OpenShift AI (RHOAI) MaaS Gateway. Improper configuration of the Gateway in a model-serving context allows a standard user with low privileges to intercept, read, log, and alter all MaaS model traffic. This includes sensitive information such as access keys, input prompts, and outputs, leading to significant information disclosure and data tampering. |
| The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.8.3 via the `create_support_user()` function. This is due to the function identifying the support account solely by matching against publicly hardcoded constants — `user_login` `'groundhogg'` and email addresses `'support@groundhogg.io'` / `'help@groundhogg.io'` — where the `in_array()` email-equality check at line 238 is not a security boundary because any user fully controls their own email value. This makes it possible for an attacker with an account whose `user_login` is `'groundhogg'` and whose `user_email` matches one of the hardcoded support constants to have that account silently promoted to administrator — and additionally to super admin on multisite when the triggering administrator holds `manage_network_options` — resulting in full site takeover. Exploitation requires a two-actor flow: the attacker must first obtain or pre-plant an account with the hardcoded credentials (possible when open user registration is enabled or another account-creation path exists), after which a legitimate administrator must invoke the support-access feature via the `submit_ticket` or `process_send_support_access` entry points to trigger the promotion. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix divide-by-zero in btf_struct_walk()
When an access goes past the struct and the last member is a flexible
array, btf_struct_walk() folds the offset back into a single element with
(off - moff) % t->size, but never checks that the element type has a size.
BTF takes an empty struct, so this in program BTF
/* event could be empty */
struct event {
#ifdef HAVE_TIMESTAMP
__u64 ts;
#endif
};
struct batch {
int nr;
struct event events[];
};
divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that
is not MEM_ALLOC, e.g. a plain read of a local kptr stashed in a map from a
sleepable program.
Oops: divide error: 0000 [#1] SMP KASAN PTI
RIP: 0010:btf_struct_walk+0x53f/0x1570
Call Trace:
<TASK>
btf_struct_access+0x42a/0xcd0
check_ptr_to_btf_access+0x4dc/0x1160
check_mem_access+0x3a45/0x8740
check_load_mem+0x36a/0xd10
do_check_common+0x3ef0/0xb210
bpf_check+0x6d3b/0x8580
bpf_prog_load+0xf7c/0x2720
__sys_bpf+0xa83/0x3690
__x64_sys_bpf+0xc7/0x150
x64_sys_call+0x1f3f/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Reject a zero-sized element type. The fixed array path in the same function
already bails out on the same thing:
btf_struct_walk()
...
/* skip empty array */
if (moff == mtrue_end)
continue;
msize /= total_nelems; |
| The Photo Reviews for WooCommerce plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via the 'wcpr_image_upload_id' parameter in all versions up to, and including, 1.2.30 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The publicly-emitted `wcpr_image_upload` nonce printed on every product review form is the only gate, and no capability, authentication, or attachment ownership check is performed, allowing the payload to be stored in comment meta — which is not subject to `wp_kses` — by any unauthenticated visitor; the XSS fires once the review is visible on the frontend. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Use a 32-bit compare in xsk_map_gen_lookup
xsk_map_gen_lookup() loads a u32 key and compares it with max_entries
using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a
max_entries value of 0x80000000 or higher becomes a threshold larger
than every zero-extended 32-bit key. An out-of-range index then skips
the bounds check and the generated lookup reads past xsk_map[].
Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range. |
