| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR hang in LAG error state unload
During firmware reset in LAG mode, a race condition causes the driver
to hang indefinitely while waiting for UMR completion during device
unload. See [1].
In LAG mode the bond device is only registered on the master, so it
never sees sys_error events from the slave.
During firmware reset this causes UMR waits to hang forever on unload
as the slave is dead but the master hasn't entered error state yet, so
UMR posts succeed but completions never arrive.
Fix this by adding a sys_error notifier that gets registered before
MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device().
This ensures error events reach the bond device throughout teardown.
[1]
Call Trace:
__schedule+0x2bd/0x760
schedule+0x37/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.6+0x2b5/0x4a0
__mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib]
? __xa_erase+0x4a/0xa0
? _cond_resched+0x15/0x30
? wait_for_completion+0x31/0x100
ib_dereg_mr_user+0x48/0xc0 [ib_core]
? rdmacg_uncharge_hierarchy+0xa0/0x100
destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x37/0x150 [ib_uverbs]
__uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs]
uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs]
ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
remove_client_context+0x8b/0xd0 [ib_core]
disable_device+0x8c/0x130 [ib_core]
__ib_unregister_device+0x10d/0x180 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
__mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib]
auxiliary_bus_remove+0x1e/0x30
device_release_driver_internal+0x103/0x1f0
bus_remove_device+0xf7/0x170
device_del+0x181/0x410
mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core]
mlx5_disable_lag+0x253/0x260 [mlx5_core]
mlx5_lag_disable_change+0x89/0xc0 [mlx5_core]
mlx5_eswitch_disable+0x67/0xa0 [mlx5_core]
mlx5_unload+0x15/0xd0 [mlx5_core]
mlx5_unload_one+0x71/0xc0 [mlx5_core]
mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core]
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Limit bpf program signature size
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
The ALB RX path may access rx_hashtbl concurrently with bond
teardown. During rapid bond up/down cycles, rlb_deinitialize()
frees rx_hashtbl while RX handlers are still running, leading
to a null pointer dereference detected by KASAN.
However, the root cause is that rlb_arp_recv() can still be accessed
after setting recv_probe to NULL, which is actually a use-after-free
(UAF) issue. That is the reason for using the referenced commit in the
Fixes tag.
[ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI
[ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
[ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary)
[ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022
[ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding]
[ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6
04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00
[ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206
[ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e
[ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8
[ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8
[ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119
[ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810
[ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000
[ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0
[ 214.310347] Call Trace:
[ 214.313070] <IRQ>
[ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding]
[ 214.320975] bond_handle_frame+0x166/0xb60 [bonding]
[ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding]
[ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710
[ 214.339199] ? __pfx_arp_process+0x10/0x10
[ 214.343775] ? sched_balance_find_src_group+0x98/0x630
[ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10
[ 214.356513] ? arp_rcv+0x307/0x690
[ 214.360311] ? __pfx_arp_rcv+0x10/0x10
[ 214.364499] ? __lock_acquire+0x58c/0xbd0
[ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0
[ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10
[ 214.380743] ? lock_acquire+0x10b/0x140
[ 214.385026] process_backlog+0x3f1/0x13a0
[ 214.389502] ? process_backlog+0x3aa/0x13a0
[ 214.394174] __napi_poll.constprop.0+0x9f/0x370
[ 214.399233] net_rx_action+0x8c1/0xe60
[ 214.403423] ? __pfx_net_rx_action+0x10/0x10
[ 214.408193] ? lock_acquire.part.0+0xbd/0x260
[ 214.413058] ? sched_clock_cpu+0x6c/0x540
[ 214.417540] ? mark_held_locks+0x40/0x70
[ 214.421920] handle_softirqs+0x1fd/0x860
[ 214.426302] ? __pfx_handle_softirqs+0x10/0x10
[ 214.431264] ? __neigh_event_send+0x2d6/0xf50
[ 214.436131] do_softirq+0xb1/0xf0
[ 214.439830] </IRQ>
The issue is reproducible by repeatedly running
ip link set bond0 up/down while receiving ARP messages, where
rlb_arp_recv() can race with rlb_deinitialize() and dereference
a freed rx_hashtbl entry.
Fix this by setting recv_probe to NULL and then calling
synchronize_net() to wait for any concurrent RX processing to finish.
This ensures that no RX handler can access rx_hashtbl after it is freed
in bond_alb_deinitialize(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: playstation: Add missing check for input_ff_create_memless
The ps_gamepad_create() function calls input_ff_create_memless()
without verifying its return value, which can lead to incorrect
behavior or potential crashes when FF effects are triggered.
Add a check for the return value of input_ff_create_memless(). |
| In the Linux kernel, the following vulnerability has been resolved:
cpuidle: Skip governor when only one idle state is available
On certain platforms (PowerNV systems without a power-mgt DT node),
cpuidle may register only a single idle state. In cases where that
single state is a polling state (state 0), the ladder governor may
incorrectly treat state 1 as the first usable state and pass an
out-of-bounds index. This can lead to a NULL enter callback being
invoked, ultimately resulting in a system crash.
[ 13.342636] cpuidle-powernv : Only Snooze is available
[ 13.351854] Faulting instruction address: 0x00000000
[ 13.376489] NIP [0000000000000000] 0x0
[ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668
Fix this by adding a bail-out in cpuidle_select() that returns state 0
directly when state_count <= 1, bypassing the governor and keeping the
tick running. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL pointer dereference in __unix_needs_revalidation
When receiving file descriptors via SCM_RIGHTS, both the socket pointer
and the socket's sk pointer can be NULL during socket setup or teardown,
causing NULL pointer dereferences in __unix_needs_revalidation().
This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new
__unix_needs_revalidation() function was added without proper NULL checks.
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0x0000000000000018
RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0)
Call Trace:
apparmor_file_receive+0x42/0x80
security_file_receive+0x2e/0x50
receive_fd+0x1d/0xf0
scm_detach_fds+0xad/0x1c0
The function dereferences sock->sk->sk_family without checking if either
sock or sock->sk is NULL first.
Add NULL checks for both sock and sock->sk before accessing sk_family. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Commit 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") added
a kref_get(&gss_auth->kref) call to balance the gss_put_auth() done
in gss_release_msg(), but forgot to add a corresponding kref_put()
on the error path when kstrdup_const() fails.
If service_name is non-NULL and kstrdup_const() fails, the function
jumps to err_put_pipe_version which calls put_pipe_version() and
kfree(gss_msg), but never releases the gss_auth reference. This leads
to a kref leak where the gss_auth structure is never freed.
Add a forward declaration for gss_free_callback() and call kref_put()
in the err_put_pipe_version error path to properly release the
reference taken earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: nau8821: Cancel delayed work on component remove
Attempting to unload the driver while a jack detection work is pending
would likely crash the kernel when it is eventually scheduled for
execution:
[ 1984.896308] BUG: unable to handle page fault for address: ffffffffc10c2a20
[...]
[ 1984.896388] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024
[ 1984.896396] Workqueue: events nau8821_jdet_work [snd_soc_nau8821]
[ 1984.896414] RIP: 0010:__mutex_lock+0x9f/0x11d0
[...]
[ 1984.896504] Call Trace:
[ 1984.896511] <TASK>
[ 1984.896524] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core]
[ 1984.896572] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core]
[ 1984.896596] snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core]
[ 1984.896622] nau8821_jdet_work+0xeb/0x1e0 [snd_soc_nau8821]
[ 1984.896636] process_one_work+0x211/0x590
[ 1984.896649] ? srso_return_thunk+0x5/0x5f
[ 1984.896670] worker_thread+0x1cd/0x3a0
Cancel unscheduled jdet_work or wait for its execution to finish before
the component driver gets removed. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: Validate SQE128 flag before accessing the cmd
ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before
IO_URING_F_SQE128 flag check. This could cause out of boundary memory
access.
Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return
-EINVAL immediately if the flag is not set. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix memory leaks in gfs2_fill_super error path
Fix two memory leaks in the gfs2_fill_super() error handling path when
transitioning a filesystem to read-write mode fails.
First leak: kthread objects (thread_struct, task_struct, etc.)
When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the
created kernel threads (logd and quotad) are never destroyed. This
occurs because the fail_per_node label doesn't call
gfs2_destroy_threads().
Second leak: quota bitmap buffer (8192 bytes)
When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but
before other operations complete, the allocated quota bitmap is never
freed.
The fix moves thread cleanup to the fail_per_node label to handle all
error paths uniformly. gfs2_destroy_threads() is safe to call
unconditionally as it checks for NULL pointers. Quota cleanup is added
in gfs2_make_fs_rw() to properly handle the withdrawal case where
quota initialization succeeds but the filesystem is then withdrawn.
Thread leak backtrace (gfs2_freeze_lock_shared failure):
unreferenced object 0xffff88801d7bca80 (size 4480):
copy_process+0x3a1/0x4670 kernel/fork.c:2422
kernel_clone+0xf3/0x6e0 kernel/fork.c:2779
kthread_create_on_node+0x100/0x150 kernel/kthread.c:478
init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611
gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265
Quota leak backtrace (gfs2_make_fs_rw failure):
unreferenced object 0xffff88812de7c000 (size 8192):
gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409
gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149
gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
In vidi_connection_ioctl(), vidi->edid(user pointer) is directly
dereferenced in the kernel.
This allows arbitrary kernel memory access from the user space, so instead
of directly accessing the user pointer in the kernel, we should modify it
to copy edid to kernel memory using copy_from_user() and use it. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix rcu_read_unlock() deadloop due to softirq
Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in
__rcu_read_unlock()") removes the recursion-protection code from
__rcu_read_unlock(). Therefore, we could invoke the deadloop in
raise_softirq_irqoff() with ftrace enabled as follows:
WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180
Modules linked in: my_irq_work(O)
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180
RSP: 0018:ffffc900000034a8 EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329
RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c
R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000
R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054
FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<IRQ>
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
__is_insn_slot_addr+0x54/0x70
kernel_text_address+0x48/0xc0
__kernel_text_address+0xd/0x40
unwind_get_return_address+0x1e/0x40
arch_stack_walk+0x9c/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
__raise_softirq_irqoff+0x61/0x80
__flush_smp_call_function_queue+0x115/0x420
__sysvec_call_function_single+0x17/0xb0
sysvec_call_function_single+0x8c/0xc0
</IRQ>
Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
fixed the infinite loop in rcu_read_unlock_special() for IRQ work by
setting a flag before calling irq_work_queue_on(). We fix this issue by
setting the same flag before calling raise_softirq_irqoff() and rename the
flag to defer_qs_pending for more common. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to
obtain a struct vidi_context pointer. However, drm_dev->dev is the
exynos-drm master device, and the driver_data contained therein is not
the vidi component device, but a completely different device.
This can lead to various bugs, ranging from null pointer dereferences and
garbage value accesses to, in unlucky cases, out-of-bounds errors,
use-after-free errors, and more.
To resolve this issue, we need to store/delete the vidi device pointer in
exynos_drm_private->vidi_dev during bind/unbind, and then read this
exynos_drm_private->vidi_dev within ioctl() to obtain the correct
struct vidi_context pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe()
In au1200fb_drv_probe(), when platform_get_irq fails(), it directly
returns from the function with an error code, which causes a memory
leak.
Replace it with a goto label to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Add validation for MTU changes
Increasing the MTU beyond the HDS threshold causes the hardware to
fragment packets across multiple buffers. If a single-buffer XDP program
is attached, the driver will drop all multi-frag frames. While we can't
prevent a remote sender from sending non-TCP packets larger than the MTU,
this will prevent users from inadvertently breaking new TCP streams.
Traditionally, drivers supported XDP with MTU less than 4Kb
(packet per page). Fbnic currently prevents attaching XDP when MTU is too high.
But it does not prevent increasing MTU after XDP is attached. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a potential use-after-free of BTF object
Refcounting in the check_pseudo_btf_id() function is incorrect:
the __check_pseudo_btf_id() function might get called with a zero
refcounted btf. Fix this, and patch related code accordingly.
v3: rephrase a comment (AI)
v2: fix a refcount leak introduced in v1 (AI) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - use RCU and work_struct to fix race condition
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng_unregister() will call kthread_stop() on the same
freed task. In both cases, a use-after-free occurs:
refcount_t: addition on 0; use-after-free.
WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0
Call Trace:
kthread_stop+0x181/0x360
hwrng_unregister+0x288/0x380
virtrng_remove+0xe3/0x200
This patch fixes the race by protecting the global hwrng_fill pointer
inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only
once, and calls to kthread_run() and kthread_stop() are serialized
with the lock held.
To avoid deadlock in hwrng_fillfn() while being stopped with the lock
held, we convert current_rng to RCU, so that get_current_rng() can read
current_rng without holding the lock. To remove the lock from put_rng(),
we also delay the actual cleanup into a work_struct.
Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()
checks are removed from its callers.
With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no
longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns
directly after current_rng is dropped, kthread_stop() would be called on
a freed task_struct later. To fix this, hwrng_fillfn() calls schedule()
now to keep the task alive until being stopped. The kthread_stop() call
is also moved from hwrng_unregister() to drop_current_rng(), ensuring
kthread_stop() is called on all possible paths where current_rng becomes
NULL, so that the thread would not wait forever. |
