| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: handle wraparound when searching for blocks for indirect mapped blocks
Commit 4865c768b563 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't irele after failing to iget in xfs_attri_recover_work
xlog_recovery_iget* never set @ip to a valid pointer if they return
an error, so this irele will walk off a dangling pointer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: drop pending enqueued packets on removal
Packets sitting in nfqueue might hold a reference to:
- templates that specify the conntrack zone, because a percpu area is
used and module removal is possible.
- conntrack timeout policies and helper, where object removal leave
a stale reference.
Since these objects can just go away, drop enqueued packets to avoid
stale reference to them.
If there is a need for finer grain removal, this logic can be revisited
to make selective packet drop upon dependencies. |
| Use-after-free in the DOM: Networking component. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. |
| zrok is software for sharing web services, files, and network resources. Prior to version 2.0.2, the zrok WebDAV drive backend (davServer.Dir) restricts path traversal through lexical normalization but does not prevent symlink following. When a symbolic link inside the shared DriveRoot points to a location outside that root, remote WebDAV consumers can read files and—on shares without OS-level permission restrictions—write or overwrite files anywhere on the host filesystem accessible to the zrok process. This issue has been patched in version 2.0.2. |
| The Sky Addons plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `sky-custom-scripts` custom post type in all versions up to, and including, 3.3.2. This is due to the custom post type being registered with `capability_type => 'post'` and `show_in_rest => true`, combined with insufficient input sanitization on the `sky_script_content` meta field and lack of output escaping when rendering scripts on the frontend. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts via the REST API that execute on every frontend page for all site visitors. |
| A security vulnerability has been detected in SourceCodester Pizzafy Ecommerce System 1.0. This issue affects some unknown processing of the file /admin/index.php. Such manipulation of the argument page leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. |
| A security vulnerability has been detected in GPAC up to 26.02.0. This affects the function sidx_box_read of the file src/isomedia/box_code_base.c. The manipulation leads to allocation of resources. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. The identifier of the patch is 442e2299530138d8f874fd885c565ba98a6318ba. It is suggested to install a patch to address this issue. |
| The NMR Strava activities plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `strava_nmr_connect` shortcode in all versions up to, and including, 1.0.14 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A vulnerability was identified in SourceCodester SUP Online Shopping 1.0. This affects an unknown function of the file /admin/message.php. The manipulation of the argument seenid leads to sql injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.3.8, a command injection vulnerability exists in github.com/elcterm/electerm/npm/install.js:130. The runLinux() function appends attacker-controlled remote version strings directly into an exec("rm -rf ...") command without validation. This issue has been patched in version 3.3.8. |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. Prior to version 0.17.14, Heimdall performs host matching in a case-sensitive manner, while HTTP hostnames are case-insensitive. This discrepancy can result in heimdall failing to match a rule for a request host that differs only in letter casing, potentially causing the request to be classified differently than intended. This issue has been patched in version 0.17.14. |
| solidtime is an open-source time-tracking app. In version 0.12.0, the PUT /api/v1/organizations/{organization}/time-entries/{timeEntry} API accepts a route-bound timeEntry from another organization when the caller has time-entries:update:all in the URL organization, allowing a known foreign time-entry UUID to be modified and rebound to objects in the caller's organization. This issue has been patched in version 0.12.1. |
| A vulnerability was found in Tenda CX12L 16.03.53.12. This issue affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg”. The manipulation results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used. |
| The User Frontend: AI Powered Frontend Posting, User Directory, Profile, Membership & User Registration plugin for WordPress is vulnerable to Deserialization of Untrusted Data in versions up to, and including, 4.3.1 This is due to insufficient input validation and type checking on the wpuf_files parameter during form submission, combined with unconditional deserialization via maybe_unserialize() when displaying post content. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary PHP objects, which can be leveraged to execute arbitrary code, delete arbitrary files, or perform other malicious actions if a POP chain is present on the target system. |
| Alkacon OpenCms before 16 allows XXE when the <!DOCTYPE> refers to an external host. |
| 1C-Bitrix through 25.100.500 allows Remote Code Execution because an actor with SOURCE/WRITE permissions for the Translate Module can upload and execute code by sending a PHP file and a .htaccess file. NOTE: this is disputed by the Supplier because this is intended behavior for the high-privileged users who can upload new translated pages to the website. |
| RayVentory Scan Engine through 12.6 Update 8 allows attackers to gain privileges if they control the value of the PATH environment variable. NOTE: this is disputed because ability of an attacker to control the environment is a site-specific misconfiguration. |
| UltraDAG is a minimal DAG-BFT blockchain in Rust. Prior to commit fb6ef59, the UltraDAG StateEngine implementation of SmartTransferTx contains a critical logic flaw in its policy enforcement pipeline. When a transaction originates from a "Pocket" (a derived sub-address documented in the protocol as a way to organize funds), the engine fails to resolve the pocket's parent account before checking the spending policy. Because pockets are "virtual" addresses that exist only as entries in the pocket_to_parent map and do not have their own SmartAccountConfig entries, the check_spending_policy method defaults to an "authorized/no policy" result. This allow any user (or attacker in possession of a parent key) to instantly drain every pocket on an account, even if the parent account has a strict 24-hour vault delay or a 1 UDAG daily limit. This issue has been patched via commit fb6ef59. |
