| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| rustls-webpki (the Rust webpki fork used by rustls) versions >= 0.101.0 and prior to 0.103.12 and 0.104.0-alpha.6 incorrectly accepted permitted-subtree DNS name constraints for certificates asserting a wildcard name. For example, a name constraint of accept.example.com was treated as satisfied by a certificate for *.example.com, which could feasibly assert reject.example.com — a name outside the permitted subtree. Because name constraints are restrictions applied to otherwise properly issued certificates, the issue is only reachable after signature verification succeeds and requires a misissued wildcard certificate to exploit. |
| vLLM versions before 0.28.0 fail to validate the lower bound of token IDs in the /v1/embeddings and /pooling endpoints, allowing unauthenticated attackers to crash the engine by submitting negative token IDs. A single request with a negative token ID triggers a CUDA device-side assertion that poisons the GPU context, causing all subsequent requests to fail until the process restarts. |
| ImageMagick before 7.1.2-31 and before 6.9.13-56 contains a policy bypass in the PCD (and, per the upstream advisory, CUBE and HALD) coder: when a specific command line option is supplied, the decoder does not check a configured resource limit, which can result in extra memory allocation. A local user able to pass command line options to ImageMagick can therefore exceed the intended memory policy limit, causing a limited availability impact. The issue is fixed in 7.1.2-31 and 6.9.13-56. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init
A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from
the destroy callback and from the init-failure unwind in the alloc handler.
It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but
nothing serializes that against the error interrupt: tegra241_cmdqv_isr()
reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can
make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is
about to be freed (a use-after-free).
deinit_vintf() also returns idx to the IDA before clearing the slot, so a
concurrent create that reuses idx can publish its new vintf into the slot,
only for this teardown to erase it again with the stale NULL store.
On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a
plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of
a published vintf such as vintf->base. A plain store gives no ordering on a
weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make
the ISR pick a vintf the moment it is published, before its fields are set
or tegra241_vintf_hw_init() runs.
The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures()
first creates VINTF0, so the slot 0 read needs the same NULL check.
Publish every slot with an smp_store_release(), and read each slot in the
ISR with an smp_load_acquire() under a NULL check, so the ISR always sees
a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and
synchronize_irq() prior to returning idx to the IDA, so no vintf is freed
under a running handler and no reused idx is clobbered. |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: Preserve allocation virtual address for dynamic pools
swiotlb_alloc_tlb() can allocate from the DMA atomic pool when a decrypted
pool is needed from atomic context. With CONFIG_DMA_DIRECT_REMAP, the
atomic pool is backed by remapped virtual addresses, which are not the same
as the direct-map addresses returned by phys_to_virt().
swiotlb_init_io_tlb_pool() currently reconstructs the pool virtual address
from the physical start address. For atomic-pool backed allocations this
stores the wrong address in pool->vaddr. Later, swiotlb_free_tlb() passes
that address to dma_free_from_pool(), which will fail to recognize the
chunk
Pass the virtual address returned by the allocation path into
swiotlb_init_io_tlb_pool(), and store that address in pool->vaddr. This
keeps the pool free path using the same virtual address as the allocator. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete
A use-after-free issue occurs in mt76_rx_poll_complete due to a race
condition. The STA has already been removed, but the rx_status still
had a pointer to the wcid in the STA.
Set the links' wcid pointers to be NULL for a MLD in
mt7925_sta_pre_rcu_remove()
BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xc8
print_report+0x1b8/0x710
kasan_report+0xe0/0x144
do_bad_area+0x120/0x260
do_tag_check_fault+0x20/0x34
do_mem_abort+0x54/0xa8
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x40/0xcc
el1h_64_sync+0x7c/0x80
mt76_rx_poll_complete+0x280/0x470
mt76_dma_rx_poll+0x114/0x51c
mt792x_poll_rx+0x60/0xf8
napi_threaded_poll_loop+0xe0/0x450
napi_threaded_poll+0x80/0x9c
kthread+0x11c/0x158
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: avoid nss underflow in mt7915_mcu_get_sta_nss
If a peer's VHT/HE MCS map has no supported spatial stream (all fields
0x3), the loop exits with nss == 0 and the function returned (u8)-1 (255),
which was then written into the firmware sta_rec_bf beamforming fields.
Clamp the result to 0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: stop PMSR before P2P and NAN teardown
PMSR request teardown must abort active measurements while the
wireless_dev is still present in the driver. cfg80211_leave_locked() and
cfg80211_stop_pd() already do this before invoking the driver's stop
callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not.
Those helpers are also called directly by nl80211, rfkill shutdown, and
wireless_dev unregister paths. If one of these paths stops a P2P device
or NAN interface with a pending request, it removes the mac80211
subinterface from the driver first. Subsequent request cleanup cannot
reach the lower driver's abort callback, but cfg80211 frees the request
regardless. Driver state can then retain a stale request and use it when
it later reports a result.
Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN
interface. This keeps lower-driver request state and cfg80211 request
ownership in sync for all of the helpers' callers. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Flush cached MSI write before unmapping the iATU
The MSI-X path already flushes any posted MSI-X write before tearing down
its iATU mapping. That was added by commit c22533c66cca ("PCI: dwc: ep:
Flush MSI-X write before unmapping its ATU entry") to make sure the write
reaches the Root Complex before the outbound window that translates it
disappears.
The MSI path has the same problem but no equivalent flush. When the
Endpoint driver caches an MSI target address and later observes that the
Root Complex has changed it, dw_pcie_ep_raise_msi_irq() unmaps the existing
iATU entry and reprograms it for the new address. Between the last MSI
writel() and the unmap there may still be a posted write sitting in the
fabric, and unmapping the iATU entry can drop or misroute that write.
Fix this by reading back from the mapped MSI window before the unmap. The
readback drains any posted MSI writes through the same iATU entry that
mapped them, which is the same logic the MSI-X path uses.
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: synchronize input before cleaning up a failed probe
hid_device_io_start() allows reports to run concurrently with probe. If
the probe subsequently fails, __hid_device_probe() releases driver
resources and clears hdev->driver without first excluding those report
callbacks.
For example, a report may enter hidraw_report_event() while the failure
path frees the associated hidraw object, leading to a use-after-free when
the report takes the object's list lock.
Stop input before performing failed-probe cleanup. This reacquires
driver_input_lock and waits for any report callback already in progress. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: check import_ubuf() return value
import_ubuf() can fail if the address range (provided by the userspace
ublk server) is outside the allowed user address space. Return that 0
bytes were copied if import_ubuf() fails rather than passing an
uninitialized struct iov_iter to ublk_copy_user_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline xattrs during inode block validation
Patch series "ocfs2: validate xattr entry bounds", v7.
This series validates OCFS2 xattr entry name/value bounds when xattr
metadata is read and validated, before getxattr() or listxattr() can walk
out-of-range entry arrays or offsets from corrupted metadata.
This patch (of 2):
ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk
metadata from it, but inline xattr metadata is still checked only in
operation-specific consumers. The existing ibody lookup helper validates
inline header placement and entry count, but inode block validation does
not reject entry name/value bounds.
Add a flat xattr entry validator and call it from inode block validation
for inline xattrs. Keep the operation paths on their existing
header/count lookup checks; the full entry bounds check now runs when the
inode block is validated at read time.
Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or
listxattr() can walk past the inline storage.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170
Read of size 2 at addr ffff8881242a2000 by task python3/529
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_find_entry+0x5a/0x170
ocfs2_xattr_get_nolock+0x20a/0x820
ocfs2_xattr_get+0x10c/0x1e0
__vfs_getxattr+0xe2/0x130
vfs_getxattr+0x185/0x1b0 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate external xattr entries when reading metadata
ocfs2_validate_xattr_block() checks the xattr block header before the
block reaches higher-level xattr users, but it does not verify that a
non-indexed block's xh_count and entry offsets fit inside the block.
Indexed buckets likewise reach list/get consumers after ECC without an
entry-bounds check.
Use the flat xattr entry validator for non-indexed external xattr blocks,
and use a bucket-specific validator for indexed buckets at metadata read
time. The bucket validator keeps the entry array bounded by the first
bucket block while checking name/value offsets against the bucket block
they target.
Reject corrupted external xattr metadata before listxattr() or getxattr()
can walk out-of-range entry arrays or name/value offsets.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190
Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_list_entries+0xd7/0x190
ocfs2_listxattr+0x3f6/0x610
listxattr+0x90/0xe0
path_listxattrat+0xed/0x220
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Invalidate RCU pointers after final spin unlock
In a sleepable BPF program, a spin lock can provide the only RCU protection
for a kptr. The final bpf_spin_unlock() ends that protection, but the
verifier leaves the pointer valid. Another CPU can then free the object
before the pointer is used. A capability-limited runtime PoC triggered a
task_struct use-after-free in __bpf_get_task_stack().
Record whether the program is in an RCU-protected context before releasing
the lock. Invalidate RCU-protected pointers only when the unlock leaves the
final such context. This preserves valid pointers in non-sleepable programs
and inside an explicit RCU read-side section. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/omap: dsi: Do not copy isr table
To be able to unregister stuff from isrs, the corresponding table was
copied. Nobody seems to unregister stuff that way, so it does not help.
But there are stack-allocated objects passed to these isrs giving chances
of UAF of these objects if irqs are unregistered while they are handled,
so better do not copy that table. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold QP references for AE and CM processing
AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa
and then use or reference them outside the xarray lock.
erdma_destroy_qp() can drop the destroy-path reference and free QP
resources while such a lookup is in flight.
Add erdma_qp_get_by_qpn() to acquire a kref under the xarray
lock with kref_get_unless_zero(). Remove the QP from the xarray
before dropping the destroy-path reference so no new lookup can acquire
it while destruction waits for existing users. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: o2hb: quiesce negotiate handlers and timeout work
Heartbeat regions publish struct o2hb_region as the private data for the
NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item()
creates the configfs region. The approve handler can call
o2hb_arm_timeout(), so a peer can touch the region timeout work before
dev_store() has finished building the heartbeat runtime, or after teardown
has started to shut that runtime back down.
The final configfs put also has to keep reg alive until the last in-flight
o2net callback drops its handler reference.
o2net_unregister_handler_list() blocks future handler lookups, but it does
not wait for sc_rx_work that already passed o2net_handler_get(). That
drain needs to cover local listener teardown as well, where the o2net
ordered workqueue may already be inside destroy_workqueue().
Fix the lifetime rule in both directions. Initialize the region delayed
works before publishing reg through the o2net handler table, keep new or
stopping regions non-armable with hr_stopping, and quiesce both delayed
works on failed-start and teardown paths even when no heartbeat thread is
left to call o2hb_disarm_timeout(). Then unregister handlers before
tearing down handler-visible region state and make the drain wait for the
active or destroying o2net ordered workqueue before release frees reg.
The buggy scenario involves two paths, with each column showing the order
within that path:
region lifecycle: late negotiate callback:
1. make_item() registers the 1. o2net_process_message() gets a
region handlers before heartbeat handler for reg.
dev_store() has built a 2. The callback runs after the lookup
runnable heartbeat context. lock is dropped and dereferences reg.
2. A failed start or rmdir 3. An approve or timeout path tries to
stops the heartbeat thread, queue reg's delayed work, or release
quiesces existing work, and races the callback body after handler
drops the final configfs ref. unregister.
3. region_release() must drain 4. The callback or delayed work can
handler-visible o2net rx work outlive reg unless lifecycle code
before freeing reg. keeps the region non-armable and
drains the active-or-destroying
o2net workqueue.
Validation reproduced this kernel report:
KASAN slab-use-after-free in __run_timers+0x22c/0x5b0
Write of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
__run_timers+0x22c/0x5b0
kasan_report+0xe0/0x110
_raw_spin_unlock_irqrestore+0x27/0x60
try_to_wake_up+0x191/0xf70
timer_expire_remote+0xae/0xf0
run_timer_softirq+0x19b/0x1a0
handle_softirqs+0x156/0x660
__irq_exit_rcu+0xc4/0x160
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
o2hb_heartbeat_group_make_item+0x3c/0x600 |
| In the Linux kernel, the following vulnerability has been resolved:
module/dups: Fix use-after-free in kmod_dup_req lifetime handling
The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed
only after it is no longer referenced. When releasing an instance, the
kmod_dup_request_delete() function removes the kmod_dup_req from the
dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it.
However, this doesn't work correctly because parallel users referencing the
instance in kmod_dup_request_exists_wait() don't enter an RCU read-side
critical section. This can result in a use-after-free.
The kmod_dup_request_exists_wait() function may need to hold a valid
reference to a kmod_dup_req instance across a blocking wait until the
corresponding modprobe command completes. This makes it unsuitable for RCU.
Fix the issue by changing the lifecycle management of kmod_dup_req to use
reference counting. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: Use PFP on the compute queues too
On GFX6, the compute rings use the same CP path as
the graphics ring. The only difference is that they
don't support draw commands. (As opposed to GFX7 and
newer which have a separate command parser that is
called MEC for compute queues.)
This means that we have to take into consideration
that the PFP also exists on compute queues on GFX6:
Use PFP for register writes on both graphics and
compute queues.
In the pipeline sync, use the PFP to wait for the
previous fence (and not the ME) to prevent the PFP
from starting to execute the next submission while
the ME is still in the previous submission.
After a VM flush, emit PFP_SYNC_ME on compute
queues as well. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create()
failure must unregister disk_dev and let scsi_disk_release() free
sdkp. Going through out_free_index kfree()s an already registered device
and leaks the sysfs entry. |
