| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: return VMA snapshot from task_vma iterator
Holding the per-VMA lock across the BPF program body creates a lock
ordering problem when helpers acquire locks that depend on mmap_lock:
vm_lock -> i_rwsem -> mmap_lock -> vm_lock
Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then
drop the lock before returning. The BPF program accesses only the
snapshot.
The verifier only trusts vm_mm and vm_file pointers (see
BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference-
counted with get_file() under the lock and released via fput() on the
next iteration or in _destroy(). vm_mm is already correct because
lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers
are left as-is by memcpy() since the verifier treats them as untrusted. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: stop hash:* range iteration at end
The following hash set variants:
hash:ip,mark
hash:ip,port
hash:ip,port,ip
hash:ip,port,net
iterate IPv4 ranges with a 32-bit iterator.
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix deadlock in remain-on-channel
mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel()
while already holding dev->mutex. Since mt76_set_channel() also acquires
dev->mutex, this results in a deadlock.
Use __mt76_set_channel() instead of mt76_set_channel().
Add cancel_delayed_work_sync() for mac_work before acquiring the mutex
in mt76_remain_on_channel() to prevent a secondary deadlock with the
mac_work workqueue. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix deadlock in hid_post_reset()
You can build a USB device that includes a HID component
and a storage or UAS component. The components can be reset
only together. That means that hid_pre_reset() and hid_post_reset()
are in the block IO error handling. Hence no memory allocation
used in them may do block IO because the IO can deadlock
on the mutex held while resetting a device and calling the
interface drivers.
Use GFP_NOIO for all allocations in them. |
| image-size through 2.0.2 contains a denial of service vulnerability that allows remote attackers to permanently block the Node.js event loop by supplying a specially crafted image buffer with a zero-valued size field in a recognized box-type. Attackers can trigger an infinite loop in the JXL or HEIF image parsers by providing a crafted image containing a box with a size of zero, causing the offset to never advance and permanently hanging the application. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.13.0, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires merging a file with outlines into a writer. This vulnerability is fixed in 6.13.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.13.0, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires extracting the text in layout mode. This vulnerability is fixed in 6.13.0. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23, a Denial of Service (DoS) vulnerability exists in the @angular/common package of Angular. The formatNumber function, which is also utilized by DecimalPipe, PercentPipe, and CurrencyPipe, does not properly validate the upper bounds of the digitsInfo parameter. Specifically, the minimum and maximum fraction digits parsed from the digitsInfo string (e.g., 1.2-4) are converted to integers and used without limits. When parsing a maliciously crafted digitsInfo string with excessively large fraction digit values (e.g., 1.200000000-200000000), the internal roundNumber function attempts to pad the digits array to match the requested fraction size. This results in an unbounded loop that repeatedly pushes elements into an array. This vulnerability is fixed in 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.12.2, an attacker who uses this vulnerability can craft a PDF which leads to large memory usage. This requires extracting the text of a page which contains a form XObject with self-references. This vulnerability is fixed in 6.12.2. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.13.1, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires merging a file with threads/articles into a writer. This vulnerability is fixed in 6.13.1. |
| pam_usb provides hardware authentication for Linux using removable media. In pam_usb 0.9.1 and earlier, usb_get_process_parent_id() can cause an infinite loop DoS because it does not initialize *ppid on failure. In pusb_local_login(), the same variable is reused as input and output in a process-tree while loop; if /proc/<pid>/stat cannot be read (for example, when an ancestor process exits during authentication), the PID is not updated and the loop does not terminate. This hangs the authenticating process (such as sudo, sshd, or login) until it is forcibly terminated. This issue has been fixed in version 0.9.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject empty multisync extension to prevent infinite loop
v3d_get_extensions() walks a userspace-provided singly-linked list of
ioctl extensions without any bound on the chain length. A local user
can craft a self-referential extension (ext->next == &ext) with zero
in_sync_count and out_sync_count, which bypasses the existing duplicate-
extension guard:
if (se->in_sync_count || se->out_sync_count)
return -EINVAL;
The guard never fires because v3d_get_multisync_post_deps() returns
immediately when count is zero, leaving both fields at zero on every
iteration. The result is an infinite loop in kernel context, blocking
the calling thread and pegging a CPU core indefinitely.
Fix this by rejecting a multisync extension where both in_sync_count
and out_sync_count are zero in v3d_get_multisync_submit_deps(). An
empty multisync carries no synchronization information and serves no
useful purpose, so returning -EINVAL for such an extension is the
correct defense against this attack vector. |
| libssh2 through 1.11.1, fixed in commit 1762685, contains a pre-authentication denial of service vulnerability in the SSH_MSG_EXT_INFO handler in src/packet.c that allows a malicious SSH server to cause a client CPU exhaustion loop by sending a crafted extension count value. A malicious server can set nr_extensions to 0xFFFFFFFF during key exchange, causing the client to spin in a tight CPU loop for over 60 seconds because return values from _libssh2_get_string() are unchecked and the session timeout does not apply to CPU-bound loops. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames()
hdlc_append() calls usleep_range() to wait for circular buffer space,
but it is called with tx_producer_lock (a spinlock) held via
hdlc_tx_frames() -> hdlc_append_tx_frame()/hdlc_append_tx_u8()/etc.
Sleeping while holding a spinlock is illegal and can trigger
"BUG: scheduling while atomic".
Fix this by moving the buffer-space wait out of hdlc_append() and into
hdlc_tx_frames(), before the spinlock is acquired. The new flow:
1. Pre-calculate the worst-case encoded frame length.
2. Wait (with sleep) outside the lock until enough space is available,
kicking the TX consumer work to drain the buffer.
3. Acquire the spinlock, re-verify space, and write the entire frame
atomically.
This ensures that sleeping only happens without any lock held, and
that frames are either fully enqueued or not written at all.
This bug is found by CodeQL static analysis tool (interprocedural
sleep-in-atomic query) and my code review. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown
epf_ntb_epc_destroy() duplicates the teardown that the caller is
supposed to do later. This leads to an oops when .allow_link fails or
when .drop_link is performed. Remove the helper.
Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC
group lifetime, and pci_epc_put() in the .drop_link path is sufficient. |
| OpenClaw before 2026.5.12 contains a cross-site scripting vulnerability in exported session HTML that preserves unsafe javascript: and data: links in generated content. Attackers can execute browser-side scripts if a trusted operator opens the exported file and activates a malicious link. |
| Improper Neutralization of Script in Attributes in a Web Page vulnerability in pragdave earmark allows stored cross-site scripting via unescaped HTML attribute values.
'Elixir.Earmark.Transform':_make_att1/2 in lib/earmark/transform.ex splices attribute values verbatim between two literal " bytes: [" ", name, "=\"", value, "\""]. Text nodes are routed through the existing escape function which encodes " as ", but attribute values never visit that path. A markdown link whose URL or title contains a bare " closes the attribute early and lets the trailing bytes be parsed by the browser as fresh HTML attributes. For example, [click](http://example.com/?a=x" onerror="alert(1)) renders as <a href="http://example.com/?a=x" onerror="alert(1)">click</a>, executing arbitrary JavaScript in the victim's browser.
The earmark library is no longer maintained and has been retired on Hex. No patched version will be released. All releases from 1.4.1 onward are affected, and users should migrate to a maintained Markdown library such as MDEx.
This issue affects earmark from 1.4.1 onward. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix IO hang with degraded array with llbitmap
When llbitmap bit state is still unwritten, any new write should force
rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying().
However, later the same check is missing in need_this_block(), causing
stripe to deadloop during handling because handle_stripe() will decide
to go to handle_stripe_fill(), meanwhile need_this_block() always return
0 and nothing is handled. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix rcu_read_unlock() deadloop due to softirq
Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in
__rcu_read_unlock()") removes the recursion-protection code from
__rcu_read_unlock(). Therefore, we could invoke the deadloop in
raise_softirq_irqoff() with ftrace enabled as follows:
WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180
Modules linked in: my_irq_work(O)
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180
RSP: 0018:ffffc900000034a8 EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329
RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c
R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000
R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054
FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<IRQ>
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
__is_insn_slot_addr+0x54/0x70
kernel_text_address+0x48/0xc0
__kernel_text_address+0xd/0x40
unwind_get_return_address+0x1e/0x40
arch_stack_walk+0x9c/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
__raise_softirq_irqoff+0x61/0x80
__flush_smp_call_function_queue+0x115/0x420
__sysvec_call_function_single+0x17/0xb0
sysvec_call_function_single+0x8c/0xc0
</IRQ>
Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
fixed the infinite loop in rcu_read_unlock_special() for IRQ work by
setting a flag before calling irq_work_queue_on(). We fix this issue by
setting the same flag before calling raise_softirq_irqoff() and rename the
flag to defer_qs_pending for more common. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix deadlock in jbd2_journal_cancel_revoke()
Commit f76d4c28a46a ("fs/jbd2: use sleeping version of
__find_get_block()") changed jbd2_journal_cancel_revoke() to use
__find_get_block_nonatomic() which holds the folio lock instead of
i_private_lock. This breaks the lock ordering (folio -> buffer) and
causes an ABBA deadlock when the filesystem blocksize < pagesize:
T1 T2
ext4_mkdir()
ext4_init_new_dir()
ext4_append()
ext4_getblk()
lock_buffer() <- A
sync_blockdev()
blkdev_writepages()
writeback_iter()
writeback_get_folio()
folio_lock() <- B
ext4_journal_get_create_access()
jbd2_journal_cancel_revoke()
__find_get_block_nonatomic()
folio_lock() <- B
block_write_full_folio()
lock_buffer() <- A
This can occasionally cause generic/013 to hang.
Fix by only calling __find_get_block_nonatomic() when the passed
buffer_head doesn't belong to the bdev, which is the only case that we
need to look up its bdev alias. Otherwise, the lookup is redundant since
the found buffer_head is equal to the one we passed in. |
