| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
During fuzz testing, the following issue was discovered:
BUG: KMSAN: uninit-value in __dma_map_sg_attrs+0x217/0x310
__dma_map_sg_attrs+0x217/0x310
dma_map_sg_attrs+0x4a/0x70
ata_qc_issue+0x9f8/0x1420
__ata_scsi_queuecmd+0x1657/0x1740
ata_scsi_queuecmd+0x79a/0x920
scsi_queue_rq+0x4472/0x4f40
blk_mq_dispatch_rq_list+0x1cca/0x3ee0
__blk_mq_sched_dispatch_requests+0x458/0x630
blk_mq_sched_dispatch_requests+0x15b/0x340
__blk_mq_run_hw_queue+0xe5/0x250
__blk_mq_delay_run_hw_queue+0x138/0x780
blk_mq_run_hw_queue+0x4bb/0x7e0
blk_mq_sched_insert_request+0x2a7/0x4c0
blk_execute_rq+0x497/0x8a0
sg_io+0xbe0/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Uninit was created at:
__alloc_pages+0x5c0/0xc80
alloc_pages+0xe0e/0x1050
blk_rq_map_user_iov+0x2b77/0x6100
blk_rq_map_user_io+0x2fa/0x4d0
sg_io+0xad6/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Bytes 14-15 of 16 are uninitialized
Memory access of size 16 starts at ffff88800cbdb000
When processing the last unaligned element of the scatterlist, it is
supplemented with missing bytes in the amount of pad_len. These bytes
remain uninitialized, which leads to a problem.
Extend last_sg->length by pad_len first, then use sg_zero_buffer() to
zero those pad_len bytes. sg_zero_buffer() uses sg_miter internally,
which correctly handles sg entries spanning multiple pages and padding
that crosses a page boundary.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Fix PMU event info array size overflow
SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo)
in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010
truncate to 16. KVM then allocates one entry but loops over the original
num_events, causing out-of-bounds reads and writes. A nested guest
triggered:
BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
Read of size 4 at addr ff600000074d46b0 by task init/1
Call Trace:
[<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
[<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268
[<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6
[<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540
[<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80
Allocated by task 1:
__kmalloc_noprof+0x19e/0x4b0
kvm_riscv_vcpu_pmu_event_info+0x72/0x142
kvm_sbi_ext_pmu_handler+0xca/0x268
kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6
kvm_riscv_vcpu_exit+0x48c/0x540
kvm_arch_vcpu_ioctl_run+0x37e/0xc80
The buggy address is located 0 bytes to the right of
allocated 16-byte region [ff600000074d46a0, ff600000074d46b0)
Store the shared-memory size in size_t and reject multiplication overflow.
Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged
to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings.
Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index
to match num_events. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: scp: Fix device reference leak on failed lookup
Make sure to drop the reference taken to the SCP device when attempting
to look up its driver data before the driver has been bound.
Note that holding a reference to a device does not prevent its driver
data from going away. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: Fix NULL pointer dereference in TPA fragment processing
Under memory pressure, the qede driver encounters NULL pointer
dereferences when processing TPA continuation fragments.
Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally
dropped the assignment of tpa_info->buffer.data in qede_tpa_start().
When memory pressure causes an SKB allocation failure in qede_tpa_start(),
the driver sets tpa_start_fail = true and attempts to recycle the physical
page later in qede_tpa_end() via qede_reuse_page(). However, because
buffer.data was left uninitialized (NULL), qede_reuse_page() pushes a
"ghost" BD (valid DMA mapping but NULL data pointer) back into the
active Rx ring.
The next time the hardware uses this ring slot, it passes a NULL page
to qede_fill_frag_skb(), causing a kernel panic.
Example crash from production system:
BUG: unable to handle kernel NULL pointer dereference at 0x8
RIP: qede_fill_frag_skb+0x96/0x430 [qede]
Call Trace:
qede_rx_int+0xb06/0x1de0
qede_poll+0x2f4/0x6c0
__napi_poll+0x2d/0x130
Fix the root cause by restoring the tpa_info->buffer.data assignment
in qede_tpa_start(), ensuring valid pages are correctly tracked and
recycled. Additionally, update the stale comment for
struct qede_agg_info::buffer to reflect its current usage. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Cancel reg_work before freeing device on remove
c4iw_uld_state_change() queues reg_work to register the RDMA device.
c4iw_remove() can free ctx->dev while this work is pending or running,
leaving c4iw_register_device() accessing the freed device.
Cancel reg_work before removing the device. The registration work can
tear down ctx->dev when registration fails, so do not unregister or
deallocate it again in that case.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: Embed counter driver data in rdma_counter allocation
Commit 7e53b31acc7f ("RDMA/core: Create and destroy rdma_counter using
rdma_zalloc_drv_obj()") requires drivers implementing counter ops to
embed struct rdma_counter in a driver-specific struct, register its size
via INIT_RDMA_OBJ_SIZE, and provide a counter_init callback.
The ionic driver was merged without this adaptation, causing a NULL
pointer dereference in alloc_and_bind() since rdma_zalloc_drv_obj()
allocates zero bytes when size_rdma_counter is unset.
Consolidate struct ionic_counter into a new struct ionic_rdma_counter
that embeds struct rdma_counter, replace the xarray with a lightweight
ida for ID allocation, and add the required counter_init and
INIT_RDMA_OBJ_SIZE declarations. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Lock the handler in ucma_set_ib_path()
ucma_set_ib_path() calls ucma_event_handler() straight from the write()
path, without the handler lock that keeps ctx->file stable while a uevent
is queued. The handler re-reads ctx->file for every dereference:
mutex_lock(&ctx->file->mut); /* file A */
list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */
mutex_unlock(&ctx->file->mut); /* file B */
wake_up_interruptible(&ctx->file->poll_wait); /* file B */
A concurrent ucma_migrate_id() reassigns ctx->file while the SET_OPTION
caller sleeps in mutex_lock(), so the list_add_tail() lands on file B's
event_list while only file A's mutex is held, racing every other user of
that list:
BUG: KASAN: slab-use-after-free in __list_add_valid_or_report+0x1aa/0x1c0
Read of size 8 at addr ffff888153c6a418 by task poc_corr/486
Call Trace:
__list_add_valid_or_report+0x1aa/0x1c0
ucma_event_handler+0x1be/0xc00
ucma_set_ib_path+0x45e/0x710
ucma_set_option+0x32e/0x590
ucma_write+0x1f9/0x330
Allocated by task 505:
ucma_write_cm_event+0x1a1/0x660
Freed by task 505:
kfree+0x1da/0x4c0
ucma_get_event+0x5d5/0x7e0
The freed object is a ucma_event that another thread dequeued from file B's
list under file B's mutex. File A's mut is left held on top of that,
wedging its next writer in uninterruptible sleep.
This path needs a bound and address-resolved cm_id, so it requires an RDMA
device to be present.
Take the handler lock around the call. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Lock the handler in ucma_write_cm_event()
ctx->file may only be changed under the handler lock and the xa_lock, which
is what stops uevents being queued for a ctx while ucma_migrate_id() moves
it to another file. The CM core takes that lock before invoking
ucma_event_handler(), but the write() paths that queue uevents themselves
do not.
ucma_write_cm_event() re-reads ctx->file for each of its four dereferences,
so ucma_migrate_id() can swap it mid-sequence:
mutex_lock(&ctx->file->mut); /* file A */
list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */
mutex_unlock(&ctx->file->mut); /* file B */
wake_up_interruptible(&ctx->file->poll_wait); /* file B */
The window is the mutex_lock() itself: the writer sleeps in it while the
migration reassigns ctx->file. The list_add_tail() then runs on file B's
event_list holding only file A's mutex:
list_add corruption. prev->next should be next (ffff888101320f30),
but was ffff88814a08c418. (prev=ffff88814a075c18).
kernel BUG at lib/list_debug.c:32!
Call Trace:
ucma_write_cm_event+0x36e/0x5e0
and file A's mut is left held forever, wedging its next writer in D state.
The uevent is also stranded on a list ucma_cleanup_ctx_events() will not
walk, so it outlives its context. /dev/infiniband/rdma_cm is 0666 and no
RDMA device is involved, so an unprivileged user reaches all of this.
Take the handler lock, as ucma_cleanup_mc_events() does; ctx->cm_id is
pinned by the ucma_get_ctx() reference. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Add UVERBS_ATTR_UHW to UVERBS_METHOD_REG_MR
The original commit missed that three drivers (mthca, irdma, siw) have UHW
data associated with reg_mr that cannot be passed through the ioctl. They
also assume that the udata cannot be NULL, so failing to pass a valid
udata can trigger a NULL udata crash in those drivers.
This never happens in real systems since in rdma-core ibv_cmd_reg_mr_ex()
does not accept a udata and those three drivers don't use it, however a
malicious userspace could trigger it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Guard legacy bundles without method_elm
The legacy write() path dispatches through a uverbs_api_write_method, but
the uverbs_attr_bundle passed to provider code does not have an ioctl
method element. If malformed provider input causes the common uverbs
validation code to emit an error message, uverbs_get_handler_fn()
dereferences the uninitialized method_elm pointer.
Initialize method_elm explicitly for legacy bundles and make
uverbs_get_handler_fn() return NULL when no ioctl method is present. The
legacy dispatcher continues to use its local write method, while the ioctl
path continues to use the registered ioctl handler. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: as3722_get_regulator_dt_data: fix premature of_node_put leaving dangling of_node pointer
In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a
reference on np, which is then assigned to pdev->dev.of_node. The
function immediately calls of_node_put(np), releasing the reference and
leaving pdev->dev.of_node as a dangling pointer.
Remove the of_node_put(np) call to let the device hold the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring_buffer_alloc_read_page()
ring_buffer_alloc_read_page() is racy with ring_buffer_subbuf_order_set,
it can allocate a reader page with an outdated order. This isn't a big
issue, the user can still re-allocate a new reader page and try again.
However, what is more problematic is if the value of subbuf_order
changes in the middle of ring_buffer_alloc_read_page(). In that case,
bpage->order might not match the actual allocated memory.
Use bpage->order for the allocation to prevent this race. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Free cpu_buffer::free_page with subbuf_order
When sub-buffers use an order greater than 0, cpu_buffer->free_page is
allocated with subbuf_order. Use the correct order for
cpu_buffer->free_page. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Hold cpu_buffer::lock when resizing a subbuf
Because, ring_buffer_subbuf_order_set() can clear cpu_buffer->free_page,
hold cpu_buffer->lock to prevent races with
ring_buffer_alloc_read_page() and ring_buffer_free_read_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page
Discarding a cached reader page after a concurrent ring buffer resize
uses the new global subbuf_order for the free_pages() call. This
mismatched order may crashes the kernel or leaks memory because the cached
page was allocated under the old size.
Save the actual free_page order alongside the page address to ensure we
always refer to the correct value and do not rely on the potentially
stalled cpu_buffer->subbuf_order value. The simplest is to make
free_page a buffer_data_read_page which already covers exactly what we
need: a page address and a page order. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: fix double-free of trailer_buf on readdir copy failure
On a readdir downcall, orangefs_devreq_write_iter() frees
op->downcall.trailer_buf with vfree() when copy_from_iter_full() fails,
but does not clear the pointer before goto Efault. The waiter in
do_readdir() is then woken with a negative status and frees the same
pointer again on its r < 0 path, causing a deterministic double-free.
A client holding /dev/pvfs2-req triggers it by sending a readdir
downcall whose declared trailer_size exceeds the bytes it supplies.
Clear the pointer after freeing so the readdir-side vfree() becomes a
no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: skip leading spaces before parsing client debug masks
orangefs_prepare_cdm_array() sizes each client debug keyword buffer
with strcspn(cds_head, " "), but then parses the keyword with %s. The
%s conversion skips leading whitespace, while strcspn() does not.
If a client debug entry starts with a space, the allocation can be sized
for an empty keyword while sscanf() copies the following non-empty token.
This can write past the end of the allocated keyword buffer.
Skip leading spaces before computing the keyword length so the allocation
matches the string parsed by sscanf(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: always run deallocs on copy-on-write completion
Local fuzzing of 6.12.94 has found the following memory leak
caused by doing 'copy_file_range()' within the same filesystem:
unreferenced object 0xffff88812192c980 (size 32):
comm "syz.0.49", pid 12095, jiffies 4294964143
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 ................
c0 c5 92 21 81 88 ff ff 00 02 00 00 00 06 00 00 ...!............
backtrace (crc 7068d63f):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
ocfs2_find_per_slot_free_list fs/ocfs2/alloc.c:6618 [inline]
ocfs2_cache_block_dealloc+0x155/0x4b0 fs/ocfs2/alloc.c:6786
ocfs2_cache_extent_block_free fs/ocfs2/alloc.c:6819 [inline]
ocfs2_unlink_path+0x286/0x450 fs/ocfs2/alloc.c:2613
ocfs2_rotate_subtree_left fs/ocfs2/alloc.c:2779 [inline]
__ocfs2_rotate_tree_left+0x1f6f/0x2da0 fs/ocfs2/alloc.c:2985
ocfs2_rotate_tree_left+0x283/0xe00 fs/ocfs2/alloc.c:3237
ocfs2_try_to_merge_extent+0xf56/0x1a20 fs/ocfs2/alloc.c:3825
ocfs2_split_extent+0x15f4/0x2940 fs/ocfs2/alloc.c:5138
ocfs2_clear_ext_refcount+0x2f6/0x550 fs/ocfs2/refcounttree.c:3098
ocfs2_replace_clusters fs/ocfs2/refcounttree.c:3131 [inline]
ocfs2_make_clusters_writable fs/ocfs2/refcounttree.c:3255 [inline]
ocfs2_replace_cow+0x991/0x1660 fs/ocfs2/refcounttree.c:3349
ocfs2_refcount_cow_hunk fs/ocfs2/refcounttree.c:3427 [inline]
ocfs2_refcount_cow+0x5e1/0x9f0 fs/ocfs2/refcounttree.c:3470
ocfs2_prepare_inode_for_write fs/ocfs2/file.c:2340 [inline]
ocfs2_file_write_iter+0xbda/0x1880 fs/ocfs2/file.c:2451
iter_file_splice_write+0x890/0xf60 fs/splice.c:743
do_splice_from fs/splice.c:944 [inline]
direct_splice_actor+0x232/0x480 fs/splice.c:1167
splice_direct_to_actor+0x4b4/0xb60 fs/splice.c:1111
do_splice_direct_actor fs/splice.c:1210 [inline]
do_splice_direct+0x10f/0x1c0 fs/splice.c:1236
do_sendfile+0x430/0xbf0 fs/read_write.c:1388
unreferenced object 0xffff88812192c5c0 (size 32):
comm "syz.0.49", pid 12095, jiffies 4294964143
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
29 70 00 00 00 00 00 00 19 00 00 00 00 00 00 00 )p..............
backtrace (crc afec850f):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
ocfs2_cache_block_dealloc+0x25c/0x4b0 fs/ocfs2/alloc.c:6793
ocfs2_cache_extent_block_free fs/ocfs2/alloc.c:6819 [inline]
ocfs2_unlink_path+0x286/0x450 fs/ocfs2/alloc.c:2613
ocfs2_rotate_subtree_left fs/ocfs2/alloc.c:2779 [inline]
__ocfs2_rotate_tree_left+0x1f6f/0x2da0 fs/ocfs2/alloc.c:2985
ocfs2_rotate_tree_left+0x283/0xe00 fs/ocfs2/alloc.c:3237
ocfs2_try_to_merge_extent+0xf56/0x1a20 fs/ocfs2/alloc.c:3825
ocfs2_split_extent+0x15f4/0x2940 fs/ocfs2/alloc.c:5138
ocfs2_clear_ext_refcount+0x2f6/0x550 fs/ocfs2/refcounttree.c:3098
ocfs2_replace_clusters fs/ocfs2/refcounttree.c:3131 [inline]
ocfs2_make_clusters_writable fs/ocfs2/refcounttree.c:3255 [inline]
ocfs2_replace_cow+0x991/0x1660 fs/ocfs2/refcounttree.c:3349
ocfs2_refcount_cow_hunk fs/ocfs2/refcounttree.c:3427 [inline]
ocfs2_refcount_cow+0x5e1/0x9f0 fs/ocfs2/refcounttree.c:3470
ocfs2_prepare_inode_for_write fs/ocfs2/file.c:2340 [inline]
ocfs2_file_write_iter+0xbda/0x1880 fs/ocfs2/file.c:2451
iter_file_splice_write+0x890/0xf60 fs/splice.c:743
do_splice_from fs/splice.c:9
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: bound namelen in dlm_migrate_request_handler
Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm".
The o2dlm receive handlers trust u8 length and count fields from the wire
without bounding them, so a node in a DLM domain can corrupt or panic any
other node with a malformed message. Three defects:
- dlm_migrate_request_handler() passes migrate->namelen unchecked to
dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an
o2dlm_mle slab object: a heap out-of-bounds write of up to ~215
attacker-controlled bytes.
- dlm_mig_lockres_handler() passes mres->lockname_len unchecked to
dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname
slab object: a heap out-of-bounds write of up to ~223 bytes.
- the same handler trusts mres->num_locks without checking that the
message is large enough to hold that many entries, so
dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len)
copy and trips a BUG_ON (an out-of-bounds read ending in a panic).
The other o2dlm receive handlers already reject an oversized name; the
migration and recovery handlers have omitted it since the DLM was added
(see the Fixes tags). Patch 1 bounds namelen; patch 2 validates
lockname_len, num_locks, and the payload size. Conforming recovery and
migration traffic is unaffected.
o2net authenticates peers only by the DLM domain key, so any node that has
joined the domain -- including a compromised or malicious member -- can
send these messages. There is no local trigger; the attacker must already
be a member of the cluster.
Each sink was confirmed under KASAN with an out-of-tree module mirroring
it exactly -- a kmem_cache/kmalloc of the real destination size, then the
same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes,
Read for the recovery walk, and a panic. A userspace AddressSanitizer
build faults identically under -m32 and -m64. Scrubbed logs are available
on request.
I reported this privately to security@kernel.org and the ocfs2 maintainers
on 2026-06-20; with no response after the standard embargo period I am
posting the fix publicly. I have no embargo requirement.
This patch (of 2):
A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied
name length (migrate->namelen) without bounding it. dlm_init_mle() then
copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[]
array of an o2dlm_mle slab object, so a malformed message from a cluster
peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds
write of attacker-controlled data, reachable by any node in the domain.
Reject an oversized name, the way dlm_master_request_handler() and the
other o2dlm receive handlers already do; the migration handler omits the
check entirely. Conforming messages are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate lengths in dlm_mig_lockres_handler
A node receiving a DLM_MIG_LOCKRES message trusts several fields of the
peer-supplied dlm_migratable_lockres without validation. num_locks and
lockname_len are bounded only on the sending side, and the message is
never checked to actually carry num_locks migratable_lock entries. As a
result dlm_process_recovery_data() walks mres->ml[0..num_locks) past the
kmalloc(data_len) copy of the message (an out-of-bounds read that ends in
a BUG_ON panic), and dlm_init_lockres() copies lockname_len bytes into the
fixed 32-byte o2dlm_lockname slab object (a heap out-of-bounds write).
Both are reachable by any node in the domain.
Validate these fields right after dlm_grab(), before anything uses them --
including the not-joined error path, which already prints mres->lockname
with the unbounded lockname_len as a %.*s precision. Reject the message
unless lockname_len <= DLM_LOCKID_NAME_MAX, num_locks <=
DLM_MAX_MIGRATABLE_LOCKS (the bound the sender already asserts), and the
payload is large enough to hold the claimed locks. Conforming recovery
and migration messages are unaffected. |
