Export limit exceeded: 394761 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (394761 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93046 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: software node: Fix software_node_get_reference_args() with index -1 The bounds check for the index passed to software_node_get_reference_args() was failing when passed UINT_MAX, this in turn would lead to an out of bound access in the property array. Fix the bound check to also cover the UINT_MAX case. | ||||
| CVE-2026-93045 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject arena frees below the arena base bpf_arena_free_pages() accepts scalar arena addresses. The runtime masks the address to the low 32 bits and reconstructs a full user address from the arena base before returning the range to the arena free tree. When the scalar value is below the low 32 bits of the arena base, full_uaddr falls below user_vm_start. The existing upper-end clipping then turns this into an out-of-range free-tree offset. A later allocation can reuse that offset and return an address below the arena mapping. Reject such frees before computing the clipped range. | ||||
| CVE-2026-93044 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for arena-related insns Since the interpreter does not support the arena-related insns, interpreter fallback should not be allowed for these insns in core.c::__bpf_prog_select_runtime(). Currently, when the interpreter executes the arena ST/LDX/STX insns, it would hit the BUG_ON() in ___bpf_prog_run() at run time. [ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0) [ 2.579998] ------------[ cut here ]------------ [ 2.580652] kernel BUG at kernel/bpf/core.c:2349! [ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI Set jit_required as true when arena map is used in the prog to disallow interpreter fallback for arena-related insns. | ||||
| CVE-2026-93043 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for gotox insn The interpreter does not recognize the BPF_JMP|BPF_JA|BPF_X insn, which is used for insn_array map. Thereafter, it would hit the BUG_ON() in ___bpf_prog_run() at run time. [ 2.563726] BPF interpreter: unknown opcode 0d (imm: 0x0) [ 2.564557] ------------[ cut here ]------------ [ 2.565206] kernel BUG at kernel/bpf/core.c:2349! [ 2.565882] Oops: invalid opcode: 0000 [#1] SMP PTI Set jit_required as true when insn_array map is used in the prog in order to disallow interpreter fallback for gotox insn in core.c::__bpf_prog_select_runtime(). | ||||
| CVE-2026-93042 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Terminate all descriptors without callbacks The DMA Engine client documentation says in the "Terminate APIs" section of Documentation/driver-api/dmaengine/client.rst: "No callback functions will be called for any incomplete transfers." dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches the interrupt handler. This schedules a callback for the active descriptor and leaves other issued or submitted descriptors queued. A late callback after dmaengine_terminate_sync() can dereference client state that has already been freed, while leftover descriptors may later restart into reused buffers or leak. Move all issued and submitted descriptors to the terminated list whenever termination completes. For a pending STOP, do this from both the DONE and ABORT paths. Complete their cookies in order without scheduling callbacks. A STOP can remain pending until the running transfer raises an interrupt. Make device_synchronize() wait for such a pending STOP to complete before releasing terminated descriptors. Reuse it from free_chan_resources(), then release the remaining virt-dma resources. Sleep instead of busy-polling while waiting, and warn if the existing timeout expires. | ||||
| CVE-2026-93041 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize abort state updates dw_edma_abort_interrupt() drops vc.lock before changing request and status. issue_pending() can acquire the lock in that small window, observe the old busy state, and skip starting queued descriptors. Then the abort handler overwrites the channel status as idle, leaving the new descriptors stranded for good. Keep descriptor completion and the state transition in the same critical section. | ||||
| CVE-2026-93040 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize channel state checks pause() and resume() read and update channel state without holding vc.lock, while the interrupt handlers update the same state under it. Take the same lock around those state checks so that request, status, and configured stay consistent. For example, pause() can observe EDMA_ST_BUSY right before the interrupt handler completes the final descriptor and moves the channel to EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No further interrupt will acknowledge the request, and since issue_pending() requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all() leaves the stale request behind, so even reconfiguring the channel does not recover it. issue_pending() already runs under vc.lock, but it tests configured before taking it. Move that test under the lock as well, so configured, request, and status are evaluated as one channel-state snapshot. | ||||
| CVE-2026-93039 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: Keep link pointers valid on realloc failure meson_card_reallocate_links() grows the DAI link and private data arrays with two consecutive krealloc() calls and updates the owner pointers only after both calls have succeeded. A successful krealloc() may move the data: it frees the old block and returns a new one. When that happens for the link array and the second krealloc() then fails, card->dai_link still points to the block that krealloc() already freed, and the error path frees the new block too. The probe error path then calls meson_card_clean_references(), which dereferences card->dai_link and kfree()s it again, resulting in a use-after-free and a double free. Commit card->dai_link and card->num_links right after the first krealloc() succeeds, so the pointer always refers to a valid allocation that meson_card_clean_references() can walk and free. krealloc() with __GFP_ZERO zero-initializes the added entries, so walking them on the error path is safe. With both failure paths reduced to a plain return, drop the goto labels and the error message. | ||||
| CVE-2026-93038 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: dac: ad5686: missing NULL check on match data Verify that chip_info pointer is not NULL. If a user binds the driver using driver_override via sysfs with a device name not present in the id_table or of_match_table, match data will be NULL. | ||||
| CVE-2026-93037 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Propagate sdma_txinit_ahg() errors set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg(). If sdma_txinit_ahg() fails, it returns before initializing tx->txreq. However, set_txreq_header_ahg() ignores the error and returns the AHG change count, causing the caller to continue processing the request as though initialization had succeeded. Propagate sdma_txinit_ahg() failures to the caller and abort request processing when initialization fails. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-92525 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.queue is a ring the application writes directly, so rxe_post_send() takes the is_user branch and only schedules send_task without validating the WQE. rxe_requester() consumes it in place via req_next_wqe() and calls copy_data(), which indexes &wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge. Only the kernel path bounds num_sge (validate_send_wr()); the user WQE is never checked, so a local unprivileged user can post a WQE with an out-of-range cur_sge or oversized num_sge and force an out-of-bounds read of the per-WQE sge array in copy_data() (vmalloc OOB read, local DoS). Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way get_srq_wqe() already guards SRQ entries, and bound cur_sge only when the WQE carries payload (dma.resid): copy_data() returns early on a zero-length copy before touching dma->sge[], so a zero-payload WQE -- the only kind a max_sge == 0 QP can post -- stays valid. Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone. | ||||
| CVE-2026-92524 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc() When its_irq_gic_domain_alloc() fails, the following its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the corresponding interrupt, which leaks the resource. Invoke its_vpe_teardown() in the error handling path to avoid the leak. [ tglx: Massaged change log ] | ||||
| CVE-2026-92523 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: validate dynamic counter attribute length RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are consumed directly with nla_get_u32(). The top-level policy validates only the container, so it does not establish the fixed shape of each child. Require every child payload to be exactly one u32 before reading it. | ||||
| CVE-2026-92522 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: validate MADT IOAPIC entry bounds The IOAPIC hotplug lookup parses both MADT and _MAT records directly. The MADT walk previously used a subtable's declared length to advance the cursor after only locating a generic header. The _MAT path likewise passed a generic header to the IOAPIC helper. Validate that a current record has a complete generic header, that its declared length is contained in the available record range, and that a typed IOAPIC record contains the full fixed IOAPIC body before reading its fields. Use the same relation for both MADT and _MAT provider paths. | ||||
| CVE-2026-92521 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root acpi_pci_root_add() assigns the freshly allocated root to device->driver_data before dmar_device_add() and pci_acpi_scan_root(). Both failure paths reach the end: label where root is kfree()'d, but only the pci_acpi_scan_root() path clears driver_data first. When dmar_device_add() fails during a hot-add, root is freed while device->driver_data still points at it. The ACPI core does not clear driver_data on attach failure, so a later acpi_pci_find_root() call may dereference this dangling pointer. acpi_pci_root_remove() has the same problem: it frees root without clearing device->driver_data, leaving a dangling pointer behind after the root bridge is removed. Move the NULL assignment to the shared end: label so every error path in acpi_pci_root_add() clears driver_data before freeing root, and clear it in acpi_pci_root_remove() as well, so the object is never left reachable through driver_data after being freed. | ||||
| CVE-2026-92520 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Zero queue and stack outputs on lock failure Queue and stack pop/peek helpers accept an uninitialized output buffer because the verifier expects the helper to initialize it. The empty-map error path clears the buffer, but a failed lock acquisition returns -EBUSY without writing it. Clear the output before returning -EBUSY so BPF programs cannot observe uninitialized stack contents after a failed helper call. | ||||
| CVE-2026-92519 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix memory leak in bpf_jit_free When bpf_int_jit_compile() is called for subprograms, it returns early during the first pass (!prog->is_func || extra_pass is false), keeping ctx->offset alive for the subsequent extra pass. If JIT compilation fails for a later subprogram, the BPF core aborts and calls bpf_jit_free() to clean up the first subprogram. However, bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory leak of the JIT context offsets array. Fix this by adding the missing kfree(jit_data->ctx.offset) in bpf_jit_free(). | ||||
| CVE-2026-92518 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix kernel stack corruption in tailcall with CFI When CONFIG_CFI_CLANG is enabled, prog->bpf_func already skips the kcfi instruction during setup. Including it again in the tailcall jump offset causes it to jump over an extra 4 bytes, skipping the stack pointer adjustment, which will result in kernel stack corruption. | ||||
| CVE-2026-92517 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, riscv: Fix extable handling for arena load_acquire emit_atomic_ld_st() returns 1 to have build_body() skip the zext after a sub-word load_acquire. The caller does "ret = ret ?: add_exception_handler(...)", which skips add_exception_handler() on any non-zero ret, so the extable entry is missing and a faulting PROBE_ATOMIC load_acquire oopses. REG_DONT_CLEAR_MARKER leaves rd stale on fault, and the verifier still thinks the load overwrote it, so a program can leak it through a map. Check ret >= 0 before calling add_exception_handler(), and pass rd for LOAD_ACQ so the fault zeroes rd like a PROBE_MEM load. Return ret unchanged for the zext skip. | ||||
| CVE-2026-92516 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix offset warn check for bpf_res_spin_lock Sashiko pointed out correctly that the case statement for BPF_RES_SPIN_LOCK incorrectly checks offset for BPF_SPIN_LOCK. Fix it by checking res_spin_lock_off instead. | ||||