| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccree - fix a memory leak in cc_mac_digest()
Add cc_unmap_result() if cc_map_hash_request_final()
fails to prevent potential memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add spectre boundry for syscall dispatch table
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables. |
| Webmin before 2.640 does not safely construct a filename for saving of an attachment within the mailboxes component. This occurs in mailboxes/detachall.cgi. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix race condition in QP timer handlers
I encontered the following warning:
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
libsha1 [last unloaded: ip6_udp_tunnel]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT
Tainted: [C]=CRAP
Hardware name: Raspberry Pi 4 Model B Rev 1.2
Call trace:
rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P)
retransmit_timer+0x130/0x188 [rdma_rxe]
call_timer_fn+0x68/0x4d0
__run_timers+0x630/0x888
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400
...
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400
The issue is caused by a race condition between retransmit_timer() and
rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping
to zero during timer handler execution.
It seems this warning is harmless because rxe_qp_do_cleanup() will flush
all pending timers and requests.
Example of flow causing the issue:
CPU0 CPU1
retransmit_timer() {
spin_lock_irqsave
rxe_destroy_qp()
__rxe_cleanup()
__rxe_put() // qp->ref_count decrease to 0
rxe_qp_do_cleanup() {
if (qp->valid) {
rxe_sched_task() {
WARN_ON(rxe_read(task->qp) <= 0);
}
}
spin_unlock_irqrestore
}
spin_lock_irqsave
qp->valid = 0
spin_unlock_irqrestore
}
Ensure the QP's reference count is maintained and its validity is checked
within the timer callbacks by adding calls to rxe_get(qp) and corresponding
rxe_put(qp) after use. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't cache extent during splitting extent
Caching extents during the splitting process is risky, as it may result
in stale extents remaining in the status tree. Moreover, in most cases,
the corresponding extent block entries are likely already cached before
the split happens, making caching here not particularly useful.
Assume we have an unwritten extent, and then DIO writes the first half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, when ext4_split_extent_at() splits this extent, it truncates the
existing extent and then inserts a new one. During this process, this
extent status entry may be shrunk, and calls to ext4_find_extent() and
ext4_cache_extents() may occur, which could potentially insert the
truncated range as a hole into the extent status tree. After the split
is completed, this hole is not replaced with the correct status.
[UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUU|HHHHHHHH] extent status tree H: hole
Then, the outer calling functions will not correct this remaining hole
extent either. Finally, if we perform a delayed buffer write on this
latter part, it will re-insert the delayed extent and cause an error in
space accounting.
In adition, if the unwritten extent cache is not shrunk during the
splitting, ext4_cache_extents() also conflicts with existing extents
when caching extents. In the future, we will add checks when caching
extents, which will trigger a warning. Therefore, Do not cache extents
that are being split. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Skip currently executing CPU in rto_next_cpu()
CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound
RT task, and a CFS task stuck in kernel space. When other CPUs switch from
RT to non-RT tasks, RT load balancing (LB) is triggered; with
HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution
of rto_push_irq_work_func. During push_rt_task on CPU0,
if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED
and after the push operation completes, CPU0 calls rto_next_cpu().
Since only CPU0 is overloaded in this scenario, rto_next_cpu() should
ideally return -1 (no further IPI needed).
However, multiple CPUs invoking tell_cpu_to_push() during LB increments
rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between
rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its
search from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory
&& rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work to
itself and send self-IPIs repeatedly. As long as CPU0 stays overloaded and
other CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop,
which triggers a CPU hardlockup due to continuous self-interrupts.
The trigging scenario is as follows:
cpu0 cpu1 cpu2
pull_rt_task
tell_cpu_to_push
<------------irq_work_queue_on
rto_push_irq_work_func
push_rt_task
resched_curr(rq) pull_rt_task
rto_next_cpu tell_cpu_to_push
<-------------------------- atomic_inc(rto_loop_next)
rd->rto_loop != next
rto_next_cpu
irq_work_queue_on
rto_push_irq_work_func
Fix redundant self-IPI by filtering the initiating CPU in rto_next_cpu().
This solution has been verified to effectively eliminate spurious self-IPIs
and prevent CPU hardlockup scenarios. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: catc: enable basic endpoint checking
catc_probe() fills three URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX
- usb_rcvintpipe(usbdev, 2) for interrupt status
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a catc_usb_ep enum for endpoint numbers, replacing magic constants
throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints()
calls after usb_set_interface() to verify endpoint types before use,
rejecting devices with mismatched descriptors at probe time.
Similar to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
which fixed the issue in rtl8150. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix e4b bitmap inconsistency reports
A bitmap inconsistency issue was observed during stress tests under
mixed huge-page workloads. Ext4 reported multiple e4b bitmap check
failures like:
ext4_mb_complex_scan_group:2508: group 350, 8179 free clusters as
per group info. But got 8192 blocks
Analysis and experimentation confirmed that the issue is caused by a
race condition between page migration and bitmap modification. Although
this timing window is extremely narrow, it is still hit in practice:
folio_lock ext4_mb_load_buddy
__migrate_folio
check ref count
folio_mc_copy __filemap_get_folio
folio_try_get(folio)
......
mb_mark_used
ext4_mb_unload_buddy
__folio_migrate_mapping
folio_ref_freeze
folio_unlock
The root cause of this issue is that the fast path of load_buddy only
increments the folio's reference count, which is insufficient to prevent
concurrent folio migration. We observed that the folio migration process
acquires the folio lock. Therefore, we can determine whether to take the
fast path in load_buddy by checking the lock status. If the folio is
locked, we opt for the slow path (which acquires the lock) to close this
concurrency window.
Additionally, this change addresses the following issues:
When the DOUBLE_CHECK macro is enabled to inspect bitmap-related
issues, the following error may be triggered:
corruption in group 324 at byte 784(6272): f in copy != ff on
disk/prealloc
Analysis reveals that this is a false positive. There is a specific race
window where the bitmap and the group descriptor become momentarily
inconsistent, leading to this error report:
ext4_mb_load_buddy ext4_mb_load_buddy
__filemap_get_folio(create|lock)
folio_lock
ext4_mb_init_cache
folio_mark_uptodate
__filemap_get_folio(no lock)
......
mb_mark_used
mb_mark_used_double
mb_cmp_bitmaps
mb_set_bits(e4b->bd_bitmap)
folio_unlock
The original logic assumed that since mb_cmp_bitmaps is called when the
bitmap is newly loaded from disk, the folio lock would be sufficient to
prevent concurrent access. However, this overlooks a specific race
condition: if another process attempts to load buddy and finds the folio
is already in an uptodate state, it will immediately begin using it without
holding folio lock. |
| SpSoft AppLock (com.sp.protector.free) 7.9.40 for Android allows a local attacker with physical access to bypass fingerprint or PIN authentication. Although the app integrates Android's biometric mechanisms, the lock is implemented with a custom overlay that fails to consistently enforce authentication. By navigating cascading interface flows - insecure navigation through exposed routes facilitates app control evasion {I.N.T.E.R.F.A.C.E] via advertisement or browser intents - an attacker can exit the lock interface without re-authentication and access protected apps (e.g., Chrome). This results in information disclosure and privilege escalation. |
| Northern.tech Mender Client 5 before 5.0.4 allows a Cryptographic signature verification bypass. |
| Command injection in Raynet rvia 12.6.4392.49-amd64.deb allows adversaries to execute commands via getconfig, and upload through the URL argument, and oracle through the -o flag The Supplier's perspective is that this is caused by Argument Injection in the find command query in rvia 12.6.4392.49. This in an arbitrary code execution flaw caused by an incorrectly constructed find command. The application actively searches for a Java executable by using search criteria that is not properly terminated or sanitized. By constructing a crafted directory path that satisfies the malformed search criteria, an attacker can trick the application into executing arbitrary Java code. This differs from standard PATH manipulation because it stems from the application's internal search logic. Specifically, a local attacker can create a crafted directory structure and path that satisfies an improperly terminated find query used by the application to locate a Java runtime. |
| Insecure Permissions vulnerability in kvf-admin v1.0.0 allows a remote attacker to escalate privileges via the UserController.java component |
| SQL Injection vulnerability in uzy-ssm-mall v1.1.0 allows a remote attacker to obtain sensitive information via the ProductMapper.xml and /OrderUtil.java components |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clear Present bit before tearing down context entry
When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.
While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.
Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.
Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: clean up the amdgpu_cs_parser_bos
In low memory conditions, kmalloc can fail. In such conditions
unlock the mutex for a clean exit.
We do not need to amdgpu_bo_list_put as it's been handled in the
amdgpu_cs_parser_fini. |
| Volcano is a Kubernetes-native batch scheduling system. Prior to v1.14.2, v1.13.3, and v1.12.4, the Volcano webhook server does not enforce a size limit on incoming HTTP request bodies. Any in-cluster pod that can reach the webhook endpoint may send an arbitrarily large request body, potentially causing the webhook server to be killed by OOM. All Volcano deployments with the webhook server exposed to in-cluster traffic are affected. This vulnerability is fixed in v1.14.2, v1.13.3, and v1.12.4. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.1 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed an authenticated user to cause denial of service due to insufficient validation. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 11.5 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed an authenticated user with developer-role permissions to access sensitive deployment data on projects due to improper authorization checks. |
