| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A use-after-free vulnerability has been identified in the GNU GRUB (Grand Unified Bootloader). The flaw occurs because the file-closing process incorrectly retains a memory pointer, leaving an invalid reference to a file system structure. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded. |
| A vulnerability has been identified in the GRUB2 bootloader's network module that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the net_set_vlan command is not properly unregistered when the network module is unloaded from memory. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.
general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347
Add a NULL check for smap in bpf_sk_storage_clone().
bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.
bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get(). |
| A use-after-free vulnerability was found in libxml2. This issue occurs when parsing XPath elements under certain circumstances when the XML schematron has the <sch:name path="..."/> schema elements. This flaw allows a malicious actor to craft a malicious XML document used as input for libxml, resulting in the program's crash using libxml or other possible undefined behaviors. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ldisc: Clear HCI_UART_PROTO_INIT on error
When hci_register_dev() fails in hci_uart_register_dev()
HCI_UART_PROTO_INIT is not cleared before calling hu->proto->close(hu)
and setting hu->hdev to NULL. This means incoming UART data will reach
the protocol-specific recv handler in hci_uart_tty_receive() after
resources are freed.
Clear HCI_UART_PROTO_INIT with a write lock before calling
hu->proto->close() and setting hu->hdev to NULL. The write lock ensures
all active readers have completed and no new reader can enter the
protocol recv path before resources are freed.
This allows the protocol-specific recv functions to remove the
"HCI_UART_REGISTERED" guard without risking a null pointer dereference
if hci_register_dev() fails. |
| A flaw was found in GnuTLS. The `gnutls_pkcs11_token_set_pin` function, used for changing the Security Officer PIN, can lead to a use-after-free vulnerability. This occurs when an attacker attempts to change the PIN with a NULL old PIN for a token that lacks a protected authentication path. |
| dhcpcd through 10.3.2, fixed in commit 78ea09e, contains a heap use-after-free vulnerability in the control socket handling within src/control.c that allows local unprivileged attackers to trigger memory corruption when privilege separation is disabled. Attackers can connect to the control socket and send a privileged command such as -x, causing control_recvdata() to free the client object while the same READ+HANGUP event subsequently reaches control_hangup() with the stale pointer, resulting in a use-after-free condition exploitable in deployments using --disable-privsep or where privsep initialization has failed with the control socket operating in mode 0666. |
| dhcpcd through 10.3.2, fixed in commit 5733d3c, contains a heap use-after-free vulnerability that allows unauthenticated same-link attackers to crash the daemon by sending a crafted DHCPv6 RENEW reply with RFC6603 OPTION_PD_EXCLUDE and both preferred and valid lifetimes set to zero. Attackers acting as or impersonating a DHCPv6 server can trigger dhcp6_deprecatedele() to free a delegated child address while an outer TAILQ_FOREACH_SAFE iterator in dhcp6_deprecateaddrs() still holds the freed pointer, causing a use-after-free when TAILQ_REMOVE is reached. |
| ImageMagick before 7.1.2-15 and 6.9.13-40 contains a heap use-after-free in the meta coder: when memory allocation fails, a single byte is written to a stale pointer. Remote attackers can trigger it by processing specially crafted image files, causing a denial of service. |
| libexpat before 2.8.2 does not consider XML_TOK_DATA_CHARS in doCdataSection and thus lacks handler call depth tracking for various calls from within handlers in cases of a policy violation. Thus, a use-after-free can occur. NOTE: this issue exists because of an incomplete fix for CVE-2026-50219. |
| Use after free in Core in Google Chrome on Windows prior to 149.0.7827.115 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
lib: test_hmm: evict device pages on file close to avoid use-after-free
Patch series "Minor hmm_test fixes and cleanups".
Two bugfixes a cleanup for the HMM kernel selftests. These were mostly
reported by Zenghui Yu with special thanks to Lorenzo for analysing and
pointing out the problems.
This patch (of 3):
When dmirror_fops_release() is called it frees the dmirror struct but
doesn't migrate device private pages back to system memory first. This
leaves those pages with a dangling zone_device_data pointer to the freed
dmirror.
If a subsequent fault occurs on those pages (eg. during coredump) the
dmirror_devmem_fault() callback dereferences the stale pointer causing a
kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64,
where a test failure triggered SIGABRT and the resulting coredump walked
the VMAs faulting in the stale device private pages.
Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in
dmirror_fops_release() to migrate all device private pages back to system
memory before freeing the dmirror struct. The function is moved earlier
in the file to avoid a forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: remove station if connection prep fails
If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup()
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results in a regression where the DHCP server fails on pmOS.
Use device_move to reparent the net_device between the gadget device and
/sys/devices/virtual/ across bind/unbind cycles. This preserves the
network interface across USB reconnection, allowing the DHCP server to
retain their binding.
Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use
__free(detach_gadget) macro to undo attachment on bind failure. The
bind_count ensures device_move executes only on the first bind.
[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/
[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/ |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: iput(sbi->node_inode)
: sbi->node_inode = NULL
: f2fs_in_warm_node_list
- is_node_folio // sbi->node_inode is NULL and panic
The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and
sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is
decremented to zero. As a result, f2fs_in_warm_node_list() may
dereference a NULL node_inode when checking whether a folio belongs to
the node inode, leading to a panic.
This patch fixes the issue by calling f2fs_in_warm_node_list() before
decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the
use-after-free condition. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: Fix use after free in inode_switch_wbs_work_fn()
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs. |
| Use-after-free in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 152 and Thunderbird 152. |
