Search Results (227 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-90040 1 Linux 1 Linux Kernel 2026-10-15 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force vCPUs to reload/recheck their guest-provided VMSA if the backing gmem page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core logic to handle invalidations as VMX does for the APIC-access page, as the two concepts are nearly identical: shove the physical address of a page into the vCPU's control structure: 1. Snapshot the invalidation sequence counter 2. Grab the pfn (from guest_memfd in this case) 3. Acquire mmu_lock for read 4. Re-request reload if retry is needed, otherwise commit the change. Note, the re-request action in #4 is necessary as KVM's retry logic is fuzzy, i.e. can get false positives. If the guest_memfd page has been dropped, at some point a subsequent reload will fail to get a PFN from guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false positive, KVM will retry until there are no relevant MMU notifier events (and will retry in the "outer" loop, i.e. will drop locks and resched as needed). Note #2! Take care to invalidate the VMSA when a relevant memslot is DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated on memslot bindings (KVM doesn't know what GFN range(s) to invalidate without a binding). And more importantly, the VMSA mapping requires a memslot, i.e. must be invalidated if its memslots disappears, regardless of the state of the underlying guest_memfd inode. Failure to invalidate the vCPU's control.vmsa_pa (which is checked by pre_sev_run()) can prevent KVM from properly freeing the page as firmware will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU is actively running, i.e. if VMSA page is in-use. That in turn leads to an RMP #PF on the next use, as the page will still be assigned to the SNP VM. SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3 SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f] CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 Call Trace: <TASK> dump_stack_lvl+0x54/0x70 rmpupdate+0x12c/0x140 rmp_make_shared+0x3b/0x60 sev_gmem_invalidate+0xe0/0x170 [kvm_amd] delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> ------------[ cut here ]------------ SEV: Failed to update RMP entry for PFN 0x78d198 error -14 WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345 CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd] Call Trace: <TASK> delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> irq event stamp: 20689 hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60 hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60 softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: ffff99 ---truncated---
CVE-2024-56770 1 Linux 1 Linux Kernel 2026-10-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: account for backlog updates from child qdisc In general, 'qlen' of any classful qdisc should keep track of the number of packets that the qdisc itself and all of its children holds. In case of netem, 'qlen' only accounts for the packets in its internal tfifo. When netem is used with a child qdisc, the child qdisc can use 'qdisc_tree_reduce_backlog' to inform its parent, netem, about created or dropped SKBs. This function updates 'qlen' and the backlog statistics of netem, but netem does not account for changes made by a child qdisc. 'qlen' then indicates the wrong number of packets in the tfifo. If a child qdisc creates new SKBs during enqueue and informs its parent about this, netem's 'qlen' value is increased. When netem dequeues the newly created SKBs from the child, the 'qlen' in netem is not updated. If 'qlen' reaches the configured sch->limit, the enqueue function stops working, even though the tfifo is not full. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configure netem as root qdisc and tbf as its child on the outgoing interface of the machine as follows: $ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100 $ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on the machine. Check the qdisc statistics: $ tc -s qdisc show dev <oif> Statistics after 10s of iPerf3 TCP test before the fix (note that netem's backlog > limit, netem stopped accepting packets): qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0) backlog 4294528236b 1155p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0) backlog 0b 0p requeues 0 Statistics after the fix: qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0) backlog 0b 0p requeues 0 tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'. The interface fully stops transferring packets and "locks". In this case, the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at its limit and no more packets are accepted. This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is only decreased when a packet is returned by its dequeue function, and not during enqueuing into the child qdisc. External updates to 'qlen' are thus accounted for and only the behavior of the backlog statistics changes. As in other qdiscs, 'qlen' then keeps track of how many packets are held in netem and all of its children. As before, sch->limit remains as the maximum number of packets in the tfifo. The same applies to netem's backlog statistics.
CVE-2023-25139 1 Gnu 1 Glibc 2026-10-14 9.8 Critical
sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.
CVE-2021-45960 6 Debian, Libexpat Project, Netapp and 3 more 10 Debian Linux, Libexpat, Active Iq Unified Manager and 7 more 2026-10-14 8.8 High
In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory).
CVE-2020-14422 5 Fedoraproject, Opensuse, Oracle and 2 more 6 Fedora, Leap, Enterprise Manager Ops Center and 3 more 2026-10-14 5.9 Medium
Lib/ipaddress.py in Python through 3.8.3 improperly computes hash values in the IPv4Interface and IPv6Interface classes, which might allow a remote attacker to cause a denial of service if an application is affected by the performance of a dictionary containing IPv4Interface or IPv6Interface objects, and this attacker can cause many dictionary entries to be created. This is fixed in: v3.5.10, v3.5.10rc1; v3.6.12; v3.7.9; v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1; v3.9.0, v3.9.0b4, v3.9.0b5, v3.9.0rc1, v3.9.0rc2.
CVE-2017-7376 3 Debian, Google, Xmlsoft 3 Debian Linux, Android, Libxml2 2026-10-14 N/A
Buffer overflow in libxml2 allows remote attackers to execute arbitrary code by leveraging an incorrect limit for port values when handling redirects.
CVE-2026-107721 1 Nearform 1 Fast-jwt 2026-10-09 5.9 Medium
fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 6.3.0, fast-jwt createVerifier accepts Infinity for clockTolerance because its option validation checks type and negativity but not finiteness. In validateClaimDateValue, infinite positive and negative modifiers make exp and nbf comparisons always pass, allowing expired or not-yet-active tokens to be accepted. The verifier cache also derives infinite bounds, so entries created under this configuration can remain valid until eviction. Exploitation requires an application administrator or equivalent configuration path to set clockTolerance to Infinity. This issue is fixed in version 6.3.0.
CVE-2026-106420 2 Google, Microsoft 2 Chrome, Windows 2026-10-07 5.4 Medium
Incorrect calculation in API in Google Chrome on on Windows prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted Chrome extension. (Chromium security severity: Medium)
CVE-2026-88371 1 Mchehab 1 Zbar 2026-10-07 5.5 Medium
ZBar commit 2ea2ca58 contains an undefined-behavior vulnerability in the Code 128 decode6() function. When processing specially crafted Code 128 input, decode_e() can return -1 for an invalid edge pattern, and decode6() subsequently left-shifts this negative signed value while constructing the edge signature. The operation invokes undefined behavior and can terminate trap-mode UBSan builds with SIGILL, resulting in denial of service.
CVE-2026-98275 1 Linux 1 Linux Kernel 2026-10-07 N/A
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Ack RX overrun interrupt correctly The RX overrun interrupt is reported in interrupt status register 4, but gmac_irq() acknowledges it using the RX descriptor error bit from status register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1 the shift leaves no bit in the 32-bit register. Acknowledge the same per-port RX overrun bit that was detected.
CVE-2026-97520 1 Linux 1 Linux Kernel 2026-09-25 7.1 High
In the Linux kernel, the following vulnerability has been resolved: gfs2: move quota_init qc iterator increment Move qc++ from the loop body into the for-loop increment expression in gfs2_quota_init(). This keeps iterator progression explicit and avoids mixing pointer advance with duplicate-slot handling in the loop body.
CVE-2026-18459 1 Rti 1 Connext Professional 2026-09-22 N/A
Incorrect Calculation vulnerability in RTI Connext Professional (Core Libraries) allows Abuse Existing Functionality. This issue affects Connext Professional: from 7.4.0 before 7.7.0.1, from 7.0.0 before 7.3.1.6, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*, from 5.2.0 before 5.2.*, from 4.1x before 5.1.*.
CVE-2026-90279 1 Linux 1 Linux Kernel 2026-09-20 N/A
In the Linux kernel, the following vulnerability has been resolved: md/raid5: round bitmap stripes with sector division raid5_bitmap_sector_map() aligns the array range to full RAID5 stripe widths before converting it to component sectors. That width is chunk_sectors multiplied by the number of data disks, and it is not always a power of two. Reproduce with a 4-disk RAID5, 1024-sector chunks, and three data disks. The full-stripe width is 3072 sectors. For a one-sector write at array sector 3072, correct rounding gives array range [3072, 6144), which maps to component range [1024, 2048). The old round_down()/round_up() logic instead gives [1024, 4096), which maps to [0, 1024). Use sector_div() based arithmetic so the rounded range is aligned to the actual RAID5 stripe width. The deterministic mapper test now reports the fixed component range as [1024, 2048), while the old mask-based range was [0, 1024).
CVE-2026-20335 1 Cisco 3 Adaptive Security Appliance Software, Secure Firewall Management Center, Secure Firewall Threat Defense 2026-09-19 8.1 High
As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20335 are related to incorrect calculation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-682.
CVE-2026-86736 1 Snipeitapp 1 Snipe-it 2026-09-19 4.3 Medium
snipe-it before 8.7.0 contains an incorrect calculation vulnerability in checkout request handling that allows authenticated users to corrupt the assets.requests_counter through duplicate submissions and cancellations without active requests. Attackers can repeatedly call cancel endpoints without active requests to drive the counter negative, or submit duplicate checkout requests to inflate the counter, misrepresenting pending demand in the admin queue.
CVE-2026-93040 1 Linux 1 Linux Kernel 2026-09-19 N/A
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize channel state checks pause() and resume() read and update channel state without holding vc.lock, while the interrupt handlers update the same state under it. Take the same lock around those state checks so that request, status, and configured stay consistent. For example, pause() can observe EDMA_ST_BUSY right before the interrupt handler completes the final descriptor and moves the channel to EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No further interrupt will acknowledge the request, and since issue_pending() requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all() leaves the stale request behind, so even reconfiguring the channel does not recover it. issue_pending() already runs under vc.lock, but it tests configured before taking it. Move that test under the lock as well, so configured, request, and status are evaluated as one channel-state snapshot.
CVE-2026-89937 1 Linux 1 Linux Kernel 2026-09-18 N/A
In the Linux kernel, the following vulnerability has been resolved: iio: chemical: sgp30: Handle IAQ thread creation failure kthread_run() can fail and return an error pointer, but sgp_probe() stores it and returns success, so the device is registered without its IAQ thread and sgp_remove() later passes the error pointer to kthread_stop(). Return the error from probe instead.
CVE-2026-89932 1 Linux 1 Linux Kernel 2026-09-18 8.8 High
In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always flush vpid02 on first use Make sure vpid02 is always flushed on first use by setting last_vpid=0 when allocating vpid02. nested_vmx_transition_tlb_flush() will always detect a VPID change on first VM-Enter after VMXON, because VPID=0 in vmcs12 is not allowed if L1 enables VPID. This avoids using stale TLB entries from a previous lifetime of the VPID, that might have been associated with a different vCPU (or a completely different VM). Note that last_vpid is already being initialized as 0 when the vCPU is created, but it is not reset when vpid02 is freed on VMXOFF. Hence, the problem can only occur if L1 does VMXOFF -> VMXON, runs an L2, and KVM happens to reuse a VPID that has TLB entries on the physical CPU.
CVE-2026-20275 1 Cisco 1 Ios Xr Software 2026-09-15 8.8 High
As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20275 are related to incorrect calculation issues that are grouped under the Common Weakness Enumeration (CWE) CWE-682.
CVE-2024-50017 1 Linux 1 Linux Kernel 2026-09-14 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: x86/mm/ident_map: Use gbpages only where full GB page should be mapped. When ident_pud_init() uses only GB pages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. This can include a lot of extra address space past that requested, including areas marked reserved by the BIOS. That allows processor speculation into reserved regions, that on UV systems can cause system halts. Only use GB pages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full GB page. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence.