| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Pin the 'struct nfs_server' during a FREE_STATEID call
Dan Aloni reports that he was able to hit a use-after-free bug if a
FREE_STATEID operation gets delayed for whatever reason. Fix this by
bumping the refcount of the 'struct nfs_server' object for the duration
of the FREE_STATEID so it doesn't get cleaned up from underneath us
while operations are still in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Skip sub-disable teardown for never-linked sub-schedulers
A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().
That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.
The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.
Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: keep chunk->transport in step with the list it is queued on
__sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's
transmitted list without updating chunk->transport:
if (chunk->tsn_gap_acked) {
list_move_tail(&chunk->transmitted_list,
&transport->transmitted);
continue;
}
The chunk then sits on a live transport's list while chunk->transport still
names a different one. If that transport is removed - sctp_assoc_rm_peer()
from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk
is left with a dangling pointer. sctp_assoc_rm_peer() scrubs
peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on
neither.
The pointer is not followed while tsn_gap_acked is set. A SACK that
reneges on the TSN clears the flag, and the next SACK reaches
tchunk->transport->flight_size -= sctp_data_size(tchunk);
inside the freed transport. KASAN reports a slab-use-after-free read in
sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the
removal and the SACKs come from the association peer.
Set chunk->transport at the move. The ordinary resend path needs nothing:
it reaches its list_move_tail() only after sctp_packet_append_chunk()
returned SCTP_XMIT_OK, and __sctp_packet_append_chunk() has rebound the
chunk by then.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: Fix UAF of sba and ieq during ism_dev_exit()
A ism interrupt handler can be active in parallel with ism_dev_exit(),
accessing freed data structures.
No new interrupts will be generated after unregister_ieq(). Drain ongoing
interrupt handlers by free_irq(), before freeing ism data structures. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Prevent subbuf order change when resizing is disabled
Because ring_buffer_subbuf_order_set() frees buffer pages, we can't
allow it when resizing is disabled. A non-consuming reader is at risk of
use-after-free (rb_advance_iter()).
Return -EBUSY on resize_disabled, matching ring_buffer_resize()
behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "thermal/drivers/hwmon: Cleanup coding style a bit"
Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style
a bit") that introduced a use-after-free into the error path of
thermal_add_hwmon_sysfs() by removing a valid check from it. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Fix use-after-free in eventfs_remove_rec()
eventfs_remove_rec() recursively removes the child at the current loop
position. After the recursive call returns, list_for_each_entry() advances
by reading list.next from the removed child.
If free_ei() drops the final reference, release_ei() reuses the list/rcu
union to queue an SRCU callback. The child may be freed before that read.
The eventfs_mutex serializes list updates, but it does not keep the removed
child alive or prevent the SRCU callback from running.
Use list_for_each_entry_safe() to save the next sibling before recursively
removing the current child. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free in cifs_try_adding_channels()
cifs_try_adding_channels() takes a temporary reference to an interface
before dropping iface_lock. If cifs_ses_add_channel() fails, it drops
that reference and then increments iface->weight_fulfilled.
A concurrent interface list refresh can remove the list reference while
channel creation is in progress. In that case, the failure-path
kref_put() releases the last reference and frees iface. Updating
weight_fulfilled afterward then accesses freed memory.
Increment weight_fulfilled before dropping the temporary reference,
keeping iface alive for the final access. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: avoid refilling the RX queue after teardown
Commit b917507e5ad9 ("vsock/virtio: stop workers during the .remove()")
made the RX worker jump to its common exit when rx_run is clear. That
exit still refills the RX queue when the buffer count is low, so work
queued across virtio_vsock_vqs_del() can add buffers after the virtqueues
have been deleted.
BUG: KASAN: slab-use-after-free in virtqueue_add_sgs
Read of size 4 by task kworker/0:1
Workqueue: virtio_vsock virtio_transport_rx_work
Call Trace:
virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796)
virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332)
virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
Freed by task 141:
kfree (mm/slub.c:6566)
vp_del_vq (drivers/virtio/virtio_pci_common.c:259)
vp_del_vqs (drivers/virtio/virtio_pci_common.c:285)
virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912)
virtio_device_freeze (drivers/virtio/virtio.c:658)
virtio_pci_freeze (drivers/virtio/virtio_pci_common.c:601)
pci_pm_freeze (drivers/pci/pci-driver.c:1098)
device_suspend (drivers/base/power/main.c:1968)
Kernel panic - not syncing: KASAN: panic_on_warn set ...
Jump to a no-refill exit when rx_run is clear, leaving the normal exit
to replenish a running queue. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: do not arm the ageing timer on a device that is down
vxlan_changelink() arms vxlan->age_timer whenever the requested ageing
interval differs from the configured one:
if (conf.age_interval != vxlan->cfg.age_interval)
mod_timer(&vxlan->age_timer, jiffies);
There is no netif_running() test, so the timer is armed even on a device
that was never brought up. The only synchronous cancel in the driver is
the timer_delete_sync() in vxlan_stop(), which is .ndo_stop.
netif_close_many() drops devices without IFF_UP before
__dev_close_many() runs, so that cancel is skipped for such a device.
vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a
member of struct vxlan_dev, so free_netdev() releases the allocation the
timer lives in while it is still queued on a timer_base.
expire_timers() unlinks the entry before it loads timer->function, so
the timer core writes through the freed object's list pointers:
BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654
Write of size 8 at addr ffff00001adace68 by task true/192
__asan_store8+0x84/0xac
__run_timers+0x208/0x654
run_timer_softirq+0x154/0x18c
Allocated by task 189:
alloc_netdev_mqs+0x64/0x720
rtnl_create_link+0x4ac/0x520
rtnl_newlink+0x758/0xd00
Freed by task 191:
netdev_release+0x40/0x58
netdev_run_todo+0x4a4/0x8c0
rtnl_dellink+0x200/0x4e8
The rtnl operations involved are netns-scoped, so an unprivileged user
can perform them in a new user and network namespace.
Arming the timer on a down device never had an effect: vxlan_cleanup()
returns early on !netif_running(), and vxlan_open() arms the timer for
any non-zero interval once the device is brought up. Add the missing
test.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix use-after-free of cached ASCONF chunk
addip_last_asconf caches the outstanding outbound ASCONF chunk. The normal
ASCONF-ACK completion path releases the chunk and clears the pointer.
However, sctp_asconf_queue_teardown() releases the cached chunk without
clearing addip_last_asconf. During peer restart handling,
sctp_sf_do_dupcook_a() queues SCTP_CMD_PURGE_ASCONF_QUEUE, which invokes
sctp_asconf_queue_teardown() while the association remains alive and leaves
the pointer dangling.
A delayed authenticated ASCONF-ACK can then reach sctp_sf_do_asconf_ack(),
which accesses the stale chunk and passes it to sctp_process_asconf_ack(),
causing a use-after-free and a second release.
Clearing the pointer exposes a race with T4 expiry. Peer restart handling
queues the timer stop before the purge, but SCTP_CMD_TIMER_STOP uses
timer_delete(), which does not wait for a callback already running on
another CPU. Such a callback can reach sctp_sf_t4_timer_expire() after
the purge and dereference NULL.
Clear addip_last_asconf after releasing the cached chunk, and make
sctp_sf_t4_timer_expire() consume a stale T4 expiry if no outstanding
ASCONF remains. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix double free in rxe_srq_from_init
In rxe_srq_from_init(), the queue pointer 'q' is assigned to
'srq->rq.queue' before copying the SRQ number to user space.
If copy_to_user() fails, the function calls rxe_queue_cleanup()
to free the queue, but leaves the now-invalid pointer in
'srq->rq.queue'.
The caller of rxe_srq_from_init() (rxe_create_srq) eventually
calls rxe_srq_cleanup() upon receiving the error, which triggers
a second rxe_queue_cleanup() on the same memory, leading to a
double free.
The call trace looks like this:
kmem_cache_free+0x.../0x...
rxe_queue_cleanup+0x1a/0x30 [rdma_rxe]
rxe_srq_cleanup+0x42/0x60 [rdma_rxe]
rxe_elem_release+0x31/0x70 [rdma_rxe]
rxe_create_srq+0x12b/0x1a0 [rdma_rxe]
ib_create_srq_user+0x9a/0x150 [ib_core]
Fix this by moving 'srq->rq.queue = q' after copy_to_user. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the
interrupt-driven block-read state machine rejects it as -EPROTO. Worse,
it returns without a NACK+STOP: the next receive cycle has already
started, so the target keeps holding SDA and the bus stays stuck until a
power cycle of this i2c controller.
Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to
2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte
path. The dummy byte is discarded; block-read callers only consume
buf[0..count-1].
Reading I2DR has likewise already armed the next byte on the
count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting
with -EPROTO; otherwise the failing transfer's STOP cannot complete and
the bus stays held.
The atomic path regressed earlier (v3.16) and is fixed separately; this
patch covers only the v6.13 state-machine rework. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock
Since dma_fence objects can be shared with other subsystems, they may be
accessed from hardirq context in those drivers, and we have to take
that into account by also using the IRQ-safe variant when acquiring
the lock.
While at it, switch to the guard model. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix race condition on rdma->state in trans_rdma.c
The rdma->state field is modified without holding req_lock in both
recv_done() and p9_cm_event_handler(), while rdma_request() accesses
the same field under the req_lock spinlock. This inconsistent locking
creates a race condition:
- recv_done() running in softirq completion context sets
rdma->state = P9_RDMA_FLUSHING without acquiring req_lock
- p9_cm_event_handler() modifies rdma->state at multiple points
(ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without
req_lock
- rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to
protect the read-modify-write of rdma->state
The race can cause lost state transitions: recv_done() or the CM
event handler could set state to FLUSHING/CLOSED while rdma_request()
is concurrently checking or modifying state under the lock, leading to
the FLUSHING transition being silently overwritten by CLOSING. This
corrupts the connection state machine and can cause use-after-free on
RDMA request objects during teardown.
Fix by adding req_lock protection to all rdma->state modifications in
recv_done() and p9_cm_event_handler(), matching the pattern already
used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore
in the CM event handler since it can race with recv_done() which runs
in softirq context.
Tested with a kernel module that races two threads (simulating
rdma_request and recv_done/CM handler) on rdma->state with proper
locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost
transitions. |
| The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. Processing a maliciously crafted file may lead to unexpected app termination. |
| llama.cpp before b8585 contains a use-after-free vulnerability in the RPC server's GRAPH_RECOMPUTE handler that allows unauthenticated remote attackers to achieve arbitrary read and write access by storing a computation graph, freeing referenced buffers, and reclaiming freed memory with attacker-controlled content. Attackers can send RPC requests to trigger re-execution of stored graphs with dangling pointers, enabling full remote code execution without requiring authentication or user interaction. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: pch: use raw_spinlock_t for the register lock
pch_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
This was confirmed on a PREEMPT_RT kernel with lockdep
(PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored
pch_irq_type()'s locking and drove it through the real genirq carrier
irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e.
the same __irq_set_trigger() edge that __setup_irq() takes for a
requested IRQ. With the original spin_lock_irqsave() edge lockdep
reported an invalid wait context, immediately followed by:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod
hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60
rt_spin_lock+0x3a/0x1c0
repro_irq_set_type+0x64/0xa0 [pch_repro]
__irq_set_trigger+0x69/0x140
irq_set_irq_type+0x78/0xd0
Switching the mirrored lock to raw_spinlock_t made both splats go away.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, but all of those critical sections only perform
MMIO register accesses (ioread32()/iowrite32()) and
irq_set_handler_locked(); none of them contain sleepable operations.
Keeping this register lock non-sleeping is therefore appropriate for the
irqchip callbacks and does not change the GPIO-side locking contract.
This is the same class of issue and fix as recently addressed for other
GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t
in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use
raw_spinlock_t in the irq startup path"). |
