| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: reset the unstable trees of all nodes
Each full scan resets ksm_nr_node_ids unstable tree roots. Enabling
merge_across_nodes resets this count to 1, even if per-node roots were
previously allocated.
So when toggling "merge_across_nodes" 0 -> 1 -> 0, a scan that starts
while the setting is 1 and continues after switching back to 0 can
encounter stale unstable tree roots, resulting in UAF.
Only root is allowed to change "merge_across_nodes", and the documented
sequence is: "merge_across_nodes setting can be changed only when there
are no ksm shared pages in the system: set run 2 to unmerge pages first,
then to 1 after changing merge_across_nodes, to remerge according to the
new setting."
Let's fix it by tracking in ksm_nr_node_ids the actual number of
allocated tree roots.
remove_all_stable_nodes() and ksm_check_stable_tree() will now scan
more tree roots (skipping the empty ones), which is harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: fix use of a freed anon_vma at swap-in
A folio read from a swap slot previously shared by KSM can remain in the
swap cache after the process that first mapped it exits. Its anon_vma
can then be freed, so ksm_might_need_to_copy() must not dereference it
to compare roots.
Doing so can result in some false-positives, resulting in the reverse
mapping missing the new folio mapping, preventing migration and reclaim.
SLAB_TYPESAFE_BY_RCU allows individual anon_vma objects to be reused
immediately after freeing. A stale pointer can then refer to another
anon_vma whose root matches, even though the target VMA is not linked
to that anon_vma.
Move the anonymous rmap compatibility checks into
folio_anon_rmap_compatible(). Keep the page-index check and compare the
folio's anon_vma pointer against the VMA's own anon_vma and root first.
If neither matches, bite the bullet and walk the VMA's anon_vma_chain.
The VMA keeps these anon_vmas alive, and finding a match guarantees that
reverse mapping can find the new mapping.
Lorenzo Stoakes says in a private discussion:
"This isn't quite equivalent to the existing check.
Every anon_vma in an anon_vma_chain shares the same root, but if you
split a VMA then fork both of them like this:
VMA A
/ \ <split>
VMA B VMA C
\ /
root <- anon_vma 1
----^ ^---- <fork>
/ parent \
anon_vma 2 anon_vma 3
| |
VMA D VMA E
VMA's D and E both get their own new
anon_vma's such that:
VMA D: anon_vma 2 -> anon_vma 1 -> root
VMA E: anon_vma 3 -> anon_vma 1 -> root
And if you found a folio referencing anon_vma 2, the existing check:
anon_vma->root == vma->anon-vma->root
Would be true for VMA's B, C, D & E.
However after your change it'd be true for VMA D only, as it's the only
one with anon_vma 2 in its anon_vma_chain.
Whether or not that could actually happen in practice... 🙂 I don't
know.
[...] after your change it'd be true for VMA D only, as it's the only
one with anon_vma 2 in its anon_vma_chain. [...] I would [...] say that
you are making the test stricter but more correct.
"
If this affects performance when KSM was never even involved, we could
just track whether KSM ever merged anything and just skip these checks.
There isn't really a lot we can do otherwise: for mapped folios we might
be able to use folio_get_anon_vma(), but for unmapped folios there really
is no easy way to see if the anon_vma is still valid.
Document the (confusing) lifetime requirements of folio_anon_vma(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: check large swap-cache folios before mapping them
KSM folios are always small, but their shared swap slots can be read
back as part of a large folio in the swap cache. ksm_might_need_to_copy()
skips large folios, so another process can map a page with an incompatible
anon_vma or page index. Reverse mapping then cannot find the new
mapping, preventing migration or reclaim.
Apply the same compatibility checks to large folios as to small ones.
Pass the page corresponding to the swap entry and copy only that page
when necessary. In do_swap_page()'s copy path, decrement only that slot's
swap count, because the source swap-cache folio can now be large.
Fix generated by an LLM and sent by Chris Mason in private. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: call ->may_split() before a partial merge
A driver can use the ->may_split() hook to forbid a VMA boundary at
certain addresses.
A device-dax device is a character device that gives raw access to a
range of memory through mmap(). device-dax refuses any address that is not
a multiple of the device's alignment through vm_ops->may_split.
vma_merge_existing_range() can move boundaries, but does not call
vm_ops->may_split.
If a range at the edge of a VMA gets the attributes of the adjacent VMA,
the function moves only that range over to the neighbour: one VMA shrinks
and the other grows. This is a partial merge, and vma_modify() tries it
before any split.
Take a device-dax VMA that lies next to another VMA of the same file.
The user calls mprotect() on the one page of the first VMA that touches
the second VMA, and asks for the protection that the second VMA already
has. The result is a partial merge. It puts the boundary inside a 1 GiB
mapping, which is a single leaf entry at the PUD level.
As part of the merge, the kernel looks for a huge PMD to split at the
new boundary. That code does not expect a PUD leaf:
vma_merge_existing_range()
commit_merge()
vma_adjust_trans_huge()
split_huge_pmd_address()
mm_find_pmd()
treats the PUD leaf as a pointer to a PMD table,
so the "table" is the device memory that the leaf maps
__split_huge_pmd()
reads a PMD that the user wrote to the device memory
folio_put() on the folio that this PMD names
Bad. While the code must at some point be taught to split PUD entries as
well, the issue here is that we move VMA boundaries such that they are
incompatible with the driver.
Fix this by calling ->may_split() on the address that a partial merge
would move the boundary to, and by abandoning the merge if the driver
refuses. vma_modify() then tries the split, which fails with -EINVAL.
Factor out existing split handling into check_split() and reuse it.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: improve description; cleanup the code ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: split huge PUDs when adjusting VMA boundaries
PFN mappings such as VFIO PCI BAR mappings can use PUD leaves while
allowing VMA splits at page granularity. However, vma_adjust_trans_huge()
only handles PMDs.
After faulting a writable PUD-sized VFIO BAR mapping, changing its first
page to read-only with mprotect() makes the PMD walk treat the PUD leaf
as a PMD table. Applying MADV_DONTFORK to the first PMD-sized chunk leaves
the PUD spanning two VMAs: the PMD-aligned boundary skips splitting.
Walk the page tables once at each adjusted boundary and split a huge
PUD or PMD leaf as needed. Handle PUD leaves even when the boundary is
PMD-aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: don't leak the charge for stack growth
acct_stack_growth() charges stack expansion even without VM_ACCOUNT.
This can happen for read-only or MAP_NORESERVE mappings created with
MAP_GROWSDOWN. Unmapping these VMAs does not release the charge, leaking
Committed_AS.
Only check and charge growth for VM_ACCOUNT VMAs, matching mremap().
Unaccounted growth skips the overcommit check while remaining subject
to the other stack-growth limits. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/cma: don't release CMA pages still in use
When a driver calls dma_free_contiguous() before quiescing DMA, the
page might still have a reference from the device.
put_page_testzero() there returns false, WARN fires, but the code proceeds
to free_contig_frozen_range() putting a live page onto buddy and clearing
the bitmap. A subsequent allocation can hand the same PFN to a new
owner while the original holder still references it.
A concurrent put_page() that drops the last reference between the
testzero loop and free_contig_frozen_range() can double-queue the page
via page->lru, corrupting buddy lists.
Avoid the corruption by not freeing a CMA region if any of the
pages inside are still in use.
Make it explicit in the warning that the driver allowed a leak.
While at it, use page_ref_freeze() to make the semantics clearer and
switch to pr_warn_ratelimited().
[ david: use page_ref_freeze() + pr_warn_ratelimited() ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory-tiers: unregister empty tiers outside memory_tier_lock
When offlining a node's last memory empties its tier,
clear_node_memory_tier() calls device_unregister() while holding
memory_tier_lock. A concurrent sysfs read can hold a kernfs active
reference and block in nodelist_show() on that mutex. device_unregister()
then waits in kernfs_drain() for the read to finish and release its active
reference, while the reader waits for the offlining task to release the
mutex.
Return the node's former tier from clear_node_memory_tier(), making the
helper more similar to set_node_memory_tier(), which also returns a
memory_tier pointer. Let the caller unlink an empty tier under
memory_tier_lock before rebuilding demotion targets, then unregister its
device after dropping the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
khugepaged: fix readahead lock inversion in collapse_file()
collapse_file() can call page_cache_sync_readahead() while still holding
source folios locked. If truncate holds mapping->invalidate_lock
exclusively and waits for one of those folios, readahead waits for
invalidate_lock and neither side can make progress.
We need to release those folio locks before starting readahead. On a page
cache miss, roll back first, populate the collapse range, and retry once.
Doing readahead after rollback avoids an extra pass when all folios are
already present. If another miss occurs on retry, give up rather than keep
retrying while truncate or reclaim removes folios.
Keep page_cache_sync_readahead() and wait for read I/O with
filemap_lock_folio(), releasing each folio before moving to the next. The
existing uptodate check during collapse still handles read errors.
Shmem uses shmem_get_folio() for swapin and fallocated folios without
taking mapping->invalidate_lock, so it is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: check folio->mapping under folio lock in memfd_pin_folios()
memfd_pin_folios() pins folios from the page cache without taking the
folio lock. khugepaged or MADV_COLLAPSE can therefore replace a folio
after checking its refcount while memfd_pin_folios() still pins the old
folio. The caller then receives a folio which is no longer part of the
memfd.
For udmabuf and iommufd, this can cause data corruption: DMA accesses
the detached folio rather than the live memfd contents. DMA reads can
return stale data, while DMA writes update the detached copy and are
lost from the live memfd. The detached folio remains pinned, so these
accesses do not constitute a use-after-free or target another
application's memory. For memfd live update, the stale contents can
reappear in the memfd after handover.
Lock the folio and recheck folio->mapping before pinning it, like other
page cache users do. If the folio was removed, retry the folio lookup
from the index that was removed. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fail the mount if the casefold flag has changed
An unprivileged user in a user namespace can repeatedly trigger a kernel
warning with their own overlay mounts. They do so by changing the
casefold flag of the topmost layer's empty root, the top directory of
that layer, after the layers are set and before the mount is created.
The casefold flag of a directory makes name lookups in that directory
case-insensitive. All layers of an overlay must agree on casefolding.
ovl_mount_dir_check() reads the casefold flag of a layer root when
fsconfig() sets that layer, and saves the result in ofs->casefold. The
mount is created later, by another fsconfig() call with
FSCONFIG_CMD_CREATE.
The casefold flag of an empty directory can be changed.
The casefold flag of the overlay root must match ofs->casefold.
ovl_get_root() copies the flag from the topmost layer root, as it is
when the mount is created. On a mismatch, ovl_get_root() only does a
WARN_ON(), and the mount continues. The check is not a WARN_ON_ONCE(),
so each such mount warns again.
An unprivileged user needs CONFIG_UNICODE, and a tmpfs mounted with the
casefold option in their namespace.
Reproduced by changing the casefold flag of the empty upper directory
after the layers were set and before FSCONFIG_CMD_CREATE, with tmpfs and
ext4 layers, and as uid 1000 in a user namespace.
Fix this by replacing the WARN_ON() with a check that fails the mount
with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: do not let chattr change the casefold flag
chattr +F or -F on an overlay directory can make the directory, or the
whole mount, unusable. Lookups of the directory, and lookups in it, then
fail. From code inspection, the caller only needs to own the directory.
The upper filesystem must support casefolding: ext4 or f2fs with the
casefold feature, or tmpfs with the casefold option.
chattr +F and -F set and clear FS_CASEFOLD_FL, the casefold flag of a
directory. The flag enables casefolding (case-insensitive name lookup)
for the directory. All directories of an overlay must match the casefold
state that was recorded at mount time, and ovl_lookup_single() enforces
this:
- A lookup in a directory that does not match fails with -ESTALE.
- A lookup of the directory itself fails with -EREMOTE.
ovl_fileattr_set() copies the directory up, which creates it in the
upper layer if it only existed in a lower layer. It then passes
FS_CASEFOLD_FL on to the upper filesystem. The upper filesystem accepts
the change if the upper directory is empty, regardless of what the
merged directory contains. The merged directory is the one that the user
sees, with the names from the upper and the lower directories.
After the change the upper directory no longer matches the mount. If the
directory is the root of the overlay, the whole mount is affected.
The flag can also change without chattr +F or -F. chattr reads all flags
of a directory, changes one and writes all of them back. For a directory
that only exists in a lower layer, overlayfs reads the flags from the
lower filesystem. xfs with the ascii-ci feature reports FS_CASEFOLD_FL
on every inode, but never sets S_CASEFOLD, the inode flag that overlayfs
compares with the mount. So its directories count as not casefolded.
With a lower layer on such an xfs and an upper layer on ext4 with the
casefold feature, chattr +A on a lower-only directory therefore sets
FS_CASEFOLD_FL on the new, empty upper directory.
Reproduced as root on tmpfs and on ext4 with chattr +F or -F on an
overlay directory whose upper directory was empty. Afterwards lookups
below it failed with ESTALE, and lookups of the directory itself failed
with EREMOTE. The chattr +A case was seen once, on a kernel with an
earlier form of this patch that still passed the caller's flag on:
lookups of the directory failed with EREMOTE.
Fix this by returning -EOPNOTSUPP if FS_IOC_SETFLAGS, the only call that
can change the flag, asks for a casefold flag on a directory that does
not agree with the casefold state of the mount. This also refuses the
chattr +A case above.
[amir: check the flag against the casefold state of the mount instead of
reading back the flags] |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix whiteout creation in casefolded directories
unlink and rmdir fail with EINVAL on an overlay with casefolded
(case-insensitive) layers, if the name exists in a lower layer.
Casefolded layers need CONFIG_UNICODE. Root can mount such an overlay,
and so can an unprivileged user in a user namespace, with tmpfs layers.
Overlayfs does not change a lower layer. To remove a name that exists
there, it hides the name with a marker file, a whiteout. It creates the
whiteout in the work directory, a scratch directory on the upper
filesystem, and renames it over the name in the upper directory:
- ovl_whiteout() creates the whiteout with mknod, or as a hard link to
an earlier whiteout.
- ovl_cleanup_and_whiteout() then prepares the rename with
start_renaming_two_dentries(), which returns -EINVAL if the source or
the target dentry is unhashed, that is, not in the dentry hash table.
With casefolded directories, both dentries can be unhashed:
- The target. Lookup in a casefolded directory leaves a negative dentry
unhashed, so the rename target is unhashed if the name does not exist
in the upper directory.
- The source, which is the new whiteout. tmpfs hashes a dentry when
mknod or link makes it positive, but ext4 does not, so on ext4 the
source is unhashed as well.
The cleanup after the failure also refuses an unhashed dentry, so on
ext4 the whiteout is left behind in the work directory.
Reproduced with rm and rmdir on casefolded tmpfs and ext4 layers, also
as uid 1000 in a user namespace.
Fix this by creating the whiteout with ovl_create_temp(), which repeats
the lookup if the new dentry is unhashed. Prepare the rename with
start_renaming_dentry(), which looks up the target name with the
directories locked. The caller looked the name up without a lock, so
return -ESTALE if the name now refers to a different inode.
[amir: pass the name used for lookup instead of taking a name snapshot] |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: clamp skb->queue_mapping before indexing the tx queue
This issue was caught by Sashiko (nipa). A producer-side path cap is
already merged (ea4d4b5dddb5); this patch adds the matching consumer-side
caps.
The issue:
The tx queue is picked and capped in netdev_core_pick_tx() before the
__dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an
egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that
store is never re-checked. bpf_convert_ctx_access() bounds it only by
NO_QUEUE_MAPPING, not by the device's queue count.
Two consumers read the stale value:
- On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which
indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a
DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds
txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the
allocation on non-lltx devices such as ifb. Drivers that index their
rings from skb_get_queue_mapping() (ex: ifb) go out of range the same
way.
- On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value;
the array is sized dev->num_tx_queues. A duplicating netem on a child
qdisc clones the skb and re-enqueues the clone at the taprio root
(qdisc_root_bh()) through a direct rootq->enqueue() call, so the value
reaches taprio_enqueue() before any dequeue cap runs.
The Fix:
Cap the mapping at the consumers and write the capped value back, so the
qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver
read stay in range.
On the dequeue side the cap folds into the dequeue path instead of a
separate walk over the returned list: dequeue_skb() caps the head, and
each bulk helper caps the element it appends. For a qdisc that is not
TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and
selects queue 0.
A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses
q->dev_queue for the frozen check, the BQL limit and the trace point, while
qdisc_restart() transmits on the skb's queue. Capping an out-of-range
mapping to queue 0 would therefore send a per-queue child's skb through a
different queue than the one it was dequeued for. On mq, mqprio, taprio and
htb offload children, a stopped queue 0 could then park the list in
q->gso_skb, and the later wake would schedule queue 0's own child instead
of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to
keep the documented invariant.
The pin covers every mapping, not only an out-of-range one: an in-range
mapping that a filter sets on one of those per-queue children is rewritten
to the child's own queue, and this path does not call netdev_cap_txqueue(),
so it logs no notice. On a single-queue device qdisc_create() sets
TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this
branch and is corrected without a notice.
That also keeps a bulk list on one queue by construction: every element of
a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is
pinned to q->dev_queue before it is appended. The fast bulk helper
therefore needs no head comparison and no skb_bad_txq requeue; the slow
helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a
mismatched follower, where a wake on any queue reschedules q.
On the enqueue side taprio_enqueue() caps the mapping against
real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so
a duplicating child cannot steer the clone out of the array.
Conditions to recreate the bug:
The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores
__sk_buff->queue_mapping (a tc BPF action is enough), attach it to a
transmit qdisc (for example a matchall filter on a prio root), and send a
packet. With a 1-queue device a store of 1 indexes one past dev->_tx[].
Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG:
KASAN: slab-out-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: inherit FMODE_NONOTIFY when opening directory realfiles
When fanotify hands a listener an fd for a permission event on an
overlay directory, ovl_dir_open_realfile() opens the real directory via
dentry_open(), not backing_file_open(), so the lower open could still
raise FS_OPEN_PERM and deadlock a listener that also marks the backing
filesystem.
Export dentry_open_nonotify() and call it from ovl_path_open_realfile()
when the overlay user file must not generate events. Ordinary
ovl_path_open() callers are unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
net: reject a negative TCP header offset in qdisc_pkt_len_segs_init()
qdisc_pkt_len_segs_init() stores skb_transport_offset(), or the inner
offset, in the unsigned hdr_len. A header in front of skb->data gives a
negative offset. For an offset a little below zero, pskb_may_pull() gets a
small length and succeeds. Then a 64-bit kernel reads the TCP header far
after the skb and can crash. Further below zero pskb_may_pull() fails.
Commit 28a57fb2c5df ("net: iptunnel: fix stale transport header during
tunnel decapsulation") fixed one source of such offsets. Other code that
removes bytes from the front of a packet can leave the same stale header.
Return SKB_DROP_REASON_SKB_BAD_GSO for a negative offset in the TCP branch.
SKB_GSO_UDP_L4 and the other GSO types read no header and still get a wrong
qdisc_pkt_len(). On a 64-bit kernel only packets that cause the read after
the skb today get a new result. Then __dev_queue_xmit() drops them and
returns -EINVAL, but sch_handle_ingress() ignores the result. Their content
can be valid. Thus the code that leaves the header stale needs its own fix. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vsock: size receive SKBs from declared payload
vhost_vsock_alloc_skb() sizes the skb from iov_length(), the total guest
descriptor length. virtio_transport_inc_rx_pkt() instead adds hdr->len to
rx_bytes and buf_used, and budgets each queued skb as SKB_TRUESIZE(0). The
guest controls the descriptor length and hdr->len independently.
A guest can therefore provide a 64 KiB descriptor while declaring a zero
payload. The descriptor-sized skb remains queued, rx_bytes and buf_used
remain unchanged, and only the fixed queue-entry budget limits retention.
This is not a lifetime leak: the skb is freed when dequeued or at socket
teardown. Repeating this across connections can nevertheless exhaust host
memory. On Linux v7.2, 455 such descriptors retained 30,255,680 bytes for
a 262,144-byte receive buffer; a full-payload control retained 265,984
bytes.
Vhost previously read hdr->len and allocated pkt->buf from that value. The
conversion from virtio_vsock_pkt to sk_buff instead allocated receive skbs
from the descriptor length, introducing the allocation-accounting mismatch.
Copy the header into a stack object and validate hdr->len before allocating
the skb. Size the allocation as sizeof(hdr) + payload_len so descriptor
capacity no longer determines queued memory. Check payload_len against
len - sizeof(hdr) to avoid addition overflow on 32-bit hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: do not use Fast Open on MP_JOIN subflows
tcp_fastopen_create_child() hands the SYN packet itself to
subflow_syn_recv_sock(). For an MP_JOIN request this takes the
fatal fallback: the cloned child is destroyed and handed back with
drop_req flagged, but tcp_fastopen_create_child() does not check
the flag and queues it, so accept() can expose the freed child.
MP_JOIN cannot use Fast Open: data on a subflow requires the
completed HMAC exchange (RFC 8684, sec. 3.2). Refuse it (only the
TFO path passes a SYN skb here) and let tcp_conn_request() fall
back to the regular MP_JOIN handshake; also strip the Fast Open
cookie from MP_JOIN SYN/ACKs.
[ Moving code to avoid clearing TS and consolidating checks. ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: keep the CS user fence BO in GTT
The CS ioctl hands the GPU the GART address of the user fence BO, but
since the BO keeps its own preferred and allowed domains, it no longer
makes sure the BO is in GTT. A user fence in a VRAM BO, which only needs
to be a page in size, gets its address from amdgpu_bo_gpu_offset(), which
warns about non-contiguous VRAM. On navi31, a CS with a user fence in a
4K VRAM BO, or in one created with AMDGPU_GEM_CREATE_VM_ALWAYS_VALID:
WARNING: amdgpu_object.c:1531 at amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu], CPU#11: cs_gem_checks/18393
RIP: 0010:amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu]
Call Trace:
<TASK>
amdgpu_cs_parser_bos.isra.0+0x4eb/0x850 [amdgpu]
amdgpu_cs_ioctl+0x97e/0x2510 [amdgpu]
drm_ioctl_kernel+0xac/0x110 [drm]
drm_ioctl+0x2c6/0x5b0 [drm]
__x64_sys_ioctl+0xa0/0xf0
do_syscall_64+0xa3/0x4d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
and BOs which can't be in GTT at all, like GWS or OA ones of a page in
size, pass the checks as well.
Only take BOs which can't be anywhere else than in GTT as user fence,
which the CS then validates there along with its other BOs. While at it,
detect userptrs with amdgpu_ttm_tt_is_userptr(); amdgpu_ttm_tt_get_usermm()
returns NULL once the task which created the userptr is gone.
v2: only take BOs which can only be in GTT instead of special casing the
user fence BO in the validation, use amdgpu_ttm_tt_is_userptr()
(Christian)
(cherry picked from commit f16989def9561d04d0f2e77216f5319112d29bf1) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: use the queue's process info for the WPTR BO eviction fence
amdgpu_amdkfd_map_gtt_bo_to_gart() removes the eviction fence of
bo->vm_bo->vm->process_info from the WPTR BO of a new queue. bo->vm_bo
is the VM which opened the BO last, not necessarily the KFD process' VM,
and a render node VM has no process info.
On navi31, an unprivileged process which exports its WPTR BO with
AMDKFD_IOC_EXPORT_DMABUF and imports it on a second render node fd
oopses in AMDKFD_IOC_CREATE_QUEUE:
BUG: kernel NULL pointer dereference, address: 0000000000000060
RIP: 0010:amdgpu_amdkfd_map_gtt_bo_to_gart+0x86/0x1a0 [amdgpu]
init_user_queue.part.0+0x180/0x250 [amdgpu]
pqm_create_queue+0x32d/0x730 [amdgpu]
kfd_ioctl_create_queue+0x583/0x9f0 [amdgpu]
Pass the process info of the queue instead. With the fix, the queue is
created and destroyed normally.
(cherry picked from commit 6b4157498a176bd1c6083f6bb5aaf8a257a2027e) |