| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ldisc: Clear HCI_UART_PROTO_INIT on error
When hci_register_dev() fails in hci_uart_register_dev()
HCI_UART_PROTO_INIT is not cleared before calling hu->proto->close(hu)
and setting hu->hdev to NULL. This means incoming UART data will reach
the protocol-specific recv handler in hci_uart_tty_receive() after
resources are freed.
Clear HCI_UART_PROTO_INIT with a write lock before calling
hu->proto->close() and setting hu->hdev to NULL. The write lock ensures
all active readers have completed and no new reader can enter the
protocol recv path before resources are freed.
This allows the protocol-specific recv functions to remove the
"HCI_UART_REGISTERED" guard without risking a null pointer dereference
if hci_register_dev() fails. |
| A vulnerability was found in Buildah. Cache mounts do not properly validate that user-specified paths for the cache are within our cache directory, allowing a `RUN` instruction in a Container file to mount an arbitrary directory from the host (read/write) into the container as long as those files can be accessed by the user running Buildah. |
| A flaw was found in the cookie date handling logic of the libsoup HTTP library, widely used by GNOME and other applications for web communication. When processing cookies with specially crafted expiration dates, the library may perform an out-of-bounds memory read. This flaw could result in unintended disclosure of memory contents, potentially exposing sensitive information from the process using libsoup. |
| OS Command Injection vulnerability in the traceroute action of Rapid7 InsightConnect Traceroute Plugin on Linux allows remote attackers to execute arbitrary OS commands via the host, port, max_ttl, count, or time_out request parameters due to insufficient input validation when constructing shell commands. |
| OS Command Injection vulnerability in the process_string action of Rapid7 InsightConnect AWK Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to unsafe shell command construction in the processing pipeline. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix null-deref with concurrent writes in passthrough mode
In passthrough mode, when dm-cache starts to invalidate a cache
entry and bio prison cell lock fails due to concurrent write to
the same cached block, mg->cell remains NULL. The error path in
invalidate_complete() attempts to unlock and free the cell
unconditionally, causing a NULL pointer dereference:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 UID: 0 PID: 134 Comm: fio Not tainted 6.19.0-rc7 #3 PREEMPT
RIP: 0010:dm_cell_unlock_v2+0x3f/0x210
<snip>
Call Trace:
invalidate_complete+0xef/0x430
map_bio+0x130f/0x1a10
cache_map+0x320/0x6b0
__map_bio+0x458/0x510
dm_submit_bio+0x40e/0x16d0
__submit_bio+0x419/0x870
<snip>
Reproduce steps:
1. Create a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Promote the first data block into cache
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the first cached block concurrently
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --numjobs=2 --size 64k
Fix by checking if mg->cell is valid before attempting to unlock it. |
| A flaw was found in KubeVirt's safepath package. The OpenAtNoFollow function uses O_PATH|O_NOFOLLOW to obtain a file descriptor to a path leaf, but downstream helpers operate via /proc/self/fd/N using link-following syscalls. When the leaf is a symlink, the kernel dereferences it, defeating the intended no-follow protection. An attacker with access to a virt-launcher pod can exploit this to cause virt-handler to apply file ownership or permission changes to an unintended host path. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: fix IPv6 route referencing IPv4 nexthop
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3 |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: require admin permission for dev-set and key-rotate
The dev-set and key-rotate netlink operations modify shared device
state (PSP version configuration and cryptographic key material,
respectively) but do not require CAP_NET_ADMIN. The only access
control is psp_dev_check_access() which merely verifies netns
membership. |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: fix inode reference leak in fsnotify_recalc_mask()
fsnotify_recalc_mask() fails to handle the return value of
__fsnotify_recalc_mask(), which may return an inode pointer that needs
to be released via fsnotify_drop_object() when the connector's HAS_IREF
flag transitions from set to cleared.
This manifests as a hung task with the following call trace:
INFO: task umount:1234 blocked for more than 120 seconds.
Call Trace:
__schedule
schedule
fsnotify_sb_delete
generic_shutdown_super
kill_anon_super
cleanup_mnt
task_work_run
do_exit
do_group_exit
The race window that triggers the iref leak:
Thread A (adding mark) Thread B (removing mark)
────────────────────── ────────────────────────
fsnotify_add_mark_locked():
fsnotify_add_mark_list():
spin_lock(conn->lock)
add mark_B(evictable) to list
spin_unlock(conn->lock)
return
/* ---- gap: no lock held ---- */
fsnotify_detach_mark(mark_A):
spin_lock(mark_A->lock)
clear ATTACHED flag on mark_A
spin_unlock(mark_A->lock)
fsnotify_put_mark(mark_A)
fsnotify_recalc_mask():
spin_lock(conn->lock)
__fsnotify_recalc_mask():
/* mark_A skipped: ATTACHED cleared */
/* only mark_B(evictable) remains */
want_iref = false
has_iref = true /* not yet cleared */
-> HAS_IREF transitions true -> false
-> returns inode pointer
spin_unlock(conn->lock)
/* BUG: return value discarded!
* iput() and fsnotify_put_sb_watched_objects()
* are never called */
Fix this by deferring the transition true -> false of HAS_IREF flag from
fsnotify_recalc_mask() (Thread A) to fsnotify_put_mark() (thread B). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix deadlock in hid_post_reset()
You can build a USB device that includes a HID component
and a storage or UAS component. The components can be reset
only together. That means that hid_pre_reset() and hid_post_reset()
are in the block IO error handling. Hence no memory allocation
used in them may do block IO because the IO can deadlock
on the mutex held while resetting a device and calling the
interface drivers.
Use GFP_NOIO for all allocations in them. |
| In the Linux kernel, the following vulnerability has been resolved:
ima_fs: Correctly create securityfs files for unsupported hash algos
ima_tpm_chip->allocated_banks[i].crypto_id is initialized to
HASH_ALGO__LAST if the TPM algorithm is not supported. However there
are places relying on the algorithm to be valid because it is accessed
by hash_algo_name[].
On 6.12.40 I observe the following read out-of-bounds in hash_algo_name:
==================================================================
BUG: KASAN: global-out-of-bounds in create_securityfs_measurement_lists+0x396/0x440
Read of size 8 at addr ffffffff83e18138 by task swapper/0/1
CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.40 #3
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x90
print_report+0xc4/0x580
? kasan_addr_to_slab+0x26/0x80
? create_securityfs_measurement_lists+0x396/0x440
kasan_report+0xc2/0x100
? create_securityfs_measurement_lists+0x396/0x440
create_securityfs_measurement_lists+0x396/0x440
ima_fs_init+0xa3/0x300
ima_init+0x7d/0xd0
init_ima+0x28/0x100
do_one_initcall+0xa6/0x3e0
kernel_init_freeable+0x455/0x740
kernel_init+0x24/0x1d0
ret_from_fork+0x38/0x80
ret_from_fork_asm+0x11/0x20
</TASK>
The buggy address belongs to the variable:
hash_algo_name+0xb8/0x420
Memory state around the buggy address:
ffffffff83e18000: 00 01 f9 f9 f9 f9 f9 f9 00 01 f9 f9 f9 f9 f9 f9
ffffffff83e18080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffff83e18100: 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 00 05 f9 f9
^
ffffffff83e18180: f9 f9 f9 f9 00 00 00 00 00 00 00 04 f9 f9 f9 f9
ffffffff83e18200: 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 f9
==================================================================
Seems like the TPM chip supports sha3_256, which isn't yet in
tpm_algorithms:
tpm tpm0: TPM with unsupported bank algorithm 0x0027
That's TPM_ALG_SHA3_256 == 0x0027 from "Trusted Platform Module 2.0
Library Part 2: Structures", page 51 [1].
See also the related U-Boot algorithms update [2].
Thus solve the problem by creating a file name with "_tpm_alg_<ID>"
postfix if the crypto algorithm isn't initialized.
This is how it looks on the test machine (patch ported to v6.12 release):
# ls -1 /sys/kernel/security/ima/
ascii_runtime_measurements
ascii_runtime_measurements_tpm_alg_27
ascii_runtime_measurements_sha1
ascii_runtime_measurements_sha256
binary_runtime_measurements
binary_runtime_measurements_tpm_alg_27
binary_runtime_measurements_sha1
binary_runtime_measurements_sha256
policy
runtime_measurements_count
violations
[1]: https://trustedcomputinggroup.org/wp-content/uploads/Trusted-Platform-Module-2.0-Library-Part-2-Version-184_pub.pdf
[2]: https://lists.denx.de/pipermail/u-boot/2024-July/558835.html |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate group add input before caching
[BUG]
OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in
ocfs2_set_new_buffer_uptodate():
kernel BUG at fs/ocfs2/uptodate.c:509!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509
Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df
Call Trace:
ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507
ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7bbfb55a966d
[CAUSE]
ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a
user-controlled group block before ocfs2_verify_group_and_input()
validates that block number. That helper is only valid for newly
allocated metadata and asserts that the block is not already present in
the chosen metadata cache. The code also uses INODE_CACHE(inode) even
though the group descriptor belongs to main_bm_inode and later journal
accesses use that cache context instead.
[FIX]
Validate the on-disk group descriptor before caching it, then add it to
the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the
validation failure path separate from the later cleanup path so we only
remove the buffer from that cache after it has actually been inserted.
This keeps the group buffer lifetime consistent across validation,
journaling, and cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local
kptr") refactored map_kptr_match_type() to branch on btf_is_kernel()
before checking base_type(). A scalar register stored into a kptr
slot has no btf, so the btf_is_kernel(reg->btf) call dereferences
NULL.
Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf
access. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI endpoint descriptor scans
snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint
descriptor size before using baAssocJackID[], but the descriptor walker can
still return a class-specific endpoint descriptor whose bLength exceeds the
remaining bytes in the endpoint-extra scan.
That leaves later flexible-array reads bounded by bLength, but not by the
remaining bytes in the endpoint-extra scan.
Stop walking when bLength is zero or
extends past the remaining endpoint-extra scan. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: unify lcn as u64 for 32-bit platforms
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com |
| py7zr is a Python-based library and utility to support 7zip archive compression, decompression, encryption and decryption. Versions 1.1.2 and below contain an an arbitrary file write vulnerability, which allows symbolic links to be recreated outside the destination directory via crafted malicious symbolic link chains. When using extractall to extract an archive, the library restores these symbolic links, linking them to arbitrary directories on the host file system. During extraction, the program only checks the link arcname within the destination directory, but ignores the combined symlink path resolution. Attackers can exploit this vulnerability by constructing malicious archives, thereby bypassing the directory boundary restrictions implemented by the extractor. Subsequent extraction of regular files through these symbolic links can result in arbitrary file writes. This vulnerability may lead to remote code execution, privilege escalation, data corruption, or denial of service. This issue has been fixed in version 1.1.3. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: prevent NULL vif dereference in mt7925_mac_write_txwi
Check for a NULL `vif` before accessing `ieee80211_vif_is_mld(vif)` to
avoid a potential kernel panic in scenarios where `vif` might not be
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
