Export limit exceeded: 414030 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25984 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80943 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.6 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID from the 802.11 header and then uses it as an index into sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID value, so the result can be in the range 0..15. rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the aggregation state array. Keep the default RTL_AGG_STOP state for out-of-range TIDs, matching rtl92cu_tx_fill_desc(). This issue was detected by our static analysis tool and confirmed by manual audit. UBSAN validation for the same bug pattern reports an array-index-out-of-bounds access with index 10 for type 'rtl_tid_data [9]'. | ||||
| CVE-2026-80936 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel mlo_pm_work on stop mt7925 queues mlo_pm_work with a 5 second delay during multi-link power-save setup and never cancels it on the stop path. If the device is torn down inside that window, the work outlives the teardown and its timer fires afterwards, trying to queue onto the workqueue that is already gone: workqueue: cannot queue mt7925_mlo_pm_work [mt7925_common] on wq phy0 WARNING: kernel/workqueue.c:2283 at __queue_work+0x59/0xa0, CPU#1: swapper/1/0 call_timer_fn+0x2a/0x140 __run_timers+0x203/0x330 run_timer_softirq+0x86/0xf0 mt7921 already has its own stop callback, so add one for mt7925 that cancels the work before calling mt792x_stop(). mt7925_ops backs both the PCIe and USB drivers, so this covers both. | ||||
| CVE-2026-80929 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[] cad_pid is global, and kill_cad_pid() is only used in the root namespace. However, due to pid_table_root_permissions(), a non-root user can unshare pid/user namespaces and modify it from the child namespace. This makes no sense and is simply wrong. Move it to kern_reboot_table[] where it logically belongs; this ensures that only GLOBAL_ROOT_UID can read/modify this sysctl. Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL, so it is always set when kern_reboot_table[] is compiled. | ||||
| CVE-2026-89629 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: corsair-void: Check size of status and firmware events before reading them Malformed status and firmware events could cause an out-of-bounds read since the size wasn't being checked. Check the size and warn on unexpected values to avoid this. | ||||
| CVE-2026-89745 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: debugfs: Fix lockdown check for mmap_prepare Commit 651fdda8406d ("relay: update relay to use mmap_prepare") changed the `mmap` file operation to `mmap_prepare` for relayfs, but the lockdown check in debugfs was not updated accordingly. This prevents debugfs from being locked down when the kernel is in integrity mode if a file uses `mmap_prepare` but not `mmap`. Since the conversion to `mmap_prepare` across the kernel is not yet complete, update the lockdown check to look for both `mmap` and `mmap_prepare` to ensure comprehensive coverage. | ||||
| CVE-2026-89514 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock fnic_fcoe_process_vlan_resp() allocates a VLAN descriptor with kzalloc_obj() (default GFP_KERNEL) while holding vlans_lock via spin_lock_irqsave(). GFP_KERNEL may sleep, which is not allowed in this atomic context and can trigger a sleeping-from-invalid-context warning or deadlock. Pass GFP_ATOMIC so the allocation is safe under the IRQ-safe spinlock. | ||||
| CVE-2026-89716 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: validate deflate params We must validate user-supplied deflate winbits before we pass it to zlib_deflate_workspacesize(), which triggers BUG_ON() if winbits value is outside of valid ranges. | ||||
| CVE-2026-89727 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: GICv2: Don't WARN on out-of-range GICV_DIR INTID vgic_v2_deactivate() passes the INTID a guest wrote to GICV_DIR straight to vgic_get_vcpu_irq(), and treats a failed lookup as a "can't happen" condition with WARN_ON_ONCE(). The guest can make it happen at will, though: for any INTID outside of the implemented SGI, PPI and SPI ranges the lookup returns NULL, since GICv2 has no LPIs. A guest running with EOImode==1 writing such an INTID to GICV_DIR triggers the WARN, and panics hosts running with panic_on_warn. Drop the WARN and ignore failed lookups. | ||||
| CVE-2026-89556 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: module: validate string table section types In elf_validity_cache_sechdrs, section sizes and offsets are validated, unless the section type is SHT_NULL or SHT_NOBITS. Later, elf_validity_cache_secstrings and elf_validity_cache_index_str access the section name table (.shstrtab) and symbol string table (.strtab) headers without first ensuring that their types are SHT_STRTAB. If a section type is SHT_NULL or SHT_NOBITS, sh_offset has not been validated and may reference out-of-bounds memory when dereferenced in elf_validity_cache_secstrings or elf_validity_cache_strtab. Validate that both string section headers are of type SHT_STRTAB before caching them. | ||||
| CVE-2026-89715 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFS/localio: fix ref leak on nfs_uuid_add_file failure When nfs_uuid_add_file() races with nfs_uuid_put() tearing down uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via rcu_assign_pointer(). nfs_open_local_fh() then enters its error branch and only releases the slot's file ref and its paired net ref plus its own entry-time net ref, while the close path is a no-op: nfs_close_local_fh() nfs_uuid = rcu_dereference(nfl->nfs_uuid); if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */ nfsd_open_local_fh() returns localio holding a caller-owned +1 nfsd_file reference (from nfsd_file_get() after nfsd_file_acquire_local()) and an entry-time nfsd_net reference (from its first nfsd_net_try_get()) embedded as nf->nf_net. Both are leaked on the failure path, pinning one nfsd_file (and the underlying struct file, dentry, inode) and one nfsd_net_ref per occurrence, which blocks nfsd_net and netns teardown. Fix by releasing the caller-owned file ref and its net ref through the existing helper, using a stack-local RCU pointer so the helper can xchg it out, then returning -ENXIO so callers do not dereference a localio whose slot has been cleared: struct nfsd_file __rcu *tmp = RCU_INITIALIZER(localio); nfs_to_nfsd_file_put_local(pnf); nfs_to_nfsd_file_put_local(&tmp); localio = ERR_PTR(-ENXIO); The trailing nfs_to_nfsd_net_put(net) continues to release the outer net ref, so all three nfsd_net_try_get() increments are balanced on the error branch. | ||||
| CVE-2026-89770 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: don't free integrity payload that doesn't exist fs_bio_integrity_alloc might not allocate a bio integrity payload if PI verification is disabled on the block device. Check for that case before calling fs_bio_integrity_free in iomap_bio_read_folio_range_sync to avoid a NULL pointer dereferences. Make the branch cover the PI verification as well - while fs_bio_integrity_verify works without an integrity payload, it requires one to actually do useful work. | ||||
| CVE-2026-89728 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: renesas: Fix out-of-bounds access for newdevs mask When software initiates DAA (Dynamic Address Assignment), the controller reports the result via the NRSPQP (Normal Response Queue Port Register). The data length field of the response descriptor, which is accessible through the NRSPQP register, indicates the number of devices remaining after DAA. Consequently, when the bus is empty, this field contains the maximum number of devices supported by the controller (8 for the Renesas I3C controller). Adjust the condition that computes the newly discovered devices bitmask to prevent an out-of-bounds when the I3C bus is empty. | ||||
| CVE-2026-89734 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init() In uvcg_video_init(), if kthread_run_worker() fails, the error logged uses uvcg_err(), however, the pointer it uses: video->uvc is not assigned at this point, triggering a null pointer dereference. Fix this by directly using uvc->func which is assigned already. | ||||
| CVE-2026-80788 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations When fuzzing the nvme target code, I tripped a kernel warning in nvmet_tcp_map_data() because the length passed into the allocator is controlled by the remote initiator. A remote initiator that sends a command with an SGL claiming a huge number, can create a scatterlist and iovec allocation of over 1 million entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER and then the page allocator will trip on a WARN_ON_ONCE_GFP() message: WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof Workqueue: nvmet_tcp_wq nvmet_tcp_io_work ... sgl_alloc_order nvmet_tcp_map_data nvmet_tcp_try_recv_pdu As it's never good to trip a kernel warning remotely due to many systems having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to the allocation flags. | ||||
| CVE-2026-89773 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Update HDCP Config In Transition State Transition state does not have a valid dm_stream_ctx that should skip configuring HDCP routine. The routine is valid to go through only when a valid stream is created. | ||||
| CVE-2026-89772 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: write-protect folios during data writeback commit 095be159f3eb ("btrfs: unify folio dirty flag clearing") replaced the folio_clear_dirty_for_io() call in extent_write_cache_pages() with a plain folio_test_dirty() check. Besides clearing the dirty flag, folio_clear_dirty_for_io() also calls folio_mkclean(), which write-protects the shared mmap PTEs mapping the folio. Note that we still do call folio_clear_dirty_for_io() later in submit_one_sector() when we clear dirty on the last sector of the folio (the only sector for non-subpage cases). But we lost this early call in extent_write_cache_pages(). Without the extra write-protection, a process with the file mmap-ed can modify a sector while it is being used by writeback in a way that expects a stable folio (checksumming, compressing, copying, etc...) without faulting, which manifests as a handful of concrete bugs. 1. For large folios or subpage sectorsize, it is possible to submit a bio which does not cover the whole folio. When this happens, we will have a bio in flight for a folio that we have *not* called folio_clear_dirty_for_io() on. If a task with an existing mmap-ed PTE writes (without faulting..) in this window, it can result in corruptions. If the write arrives while the checksumming or writing itself is underway, this can result in an invalid checksum and later corruption reports on read. If the write arrives after checksumming/writing is done but before the last sector dirty is cleared, then the write is present in page cache but doesn't affect the dirty tracking and will be lost when the folio is fully finished being submitted and the dirty bit is cleared. This results in losing the write even if fsync() is called. 2. For zoned submissions which are done in batch separate from the main extent_writepage() loop, we also risk csum violations for those submissions. Zoned writes are clamped to max_zone_append_size and are not aligned with folios, so a submission can span two folios. The first folio being processed in extent_write_cache_pages() will call extent_write_locked_range() which will submit the partial range of the next folio, while the rest of that folio could still be dirty. So clearing dirty on the submitted sectors doesn't call folio_clear_dirty_for_io() and we have the same issue. Since extent_write_cache_pages() skips these batch submitted folios (they are already marked for writeback from submission by the preceding folio), we must add the extra write protection in lock_delalloc_folios(). 3. For inline extents this will subtly risk losing writes that happen after/while we copy the inline extent but before we clear dirty on the folio. 4. For folios spanning EOF, mmap could tamper with the zeroed bytes past EOF and cause them to be persisted where future faults would improperly see them instead of zeros. 5. Finally, for compressed extents, we risk modifying the folios while we work on compressing them which will result in corrupted compressed data. Specifically, in run_delalloc_compressed() we queue up work to do compress_file_range() in BTRFS_COMPRESSION_CHUNK_SIZE (512K) chunks which will call btrfs_folio_clamp_clear_dirty() on the range. For non-subpage, this will always clear the whole folio, safely. For subpage, we risk a partial clear here as well. In particular, imagine a 2M folio broken up into 512K chunks of work which might start compression work on one chunk before all the chunks compress_file_range() workers have gotten far enough to finish clearing all the dirty bitmaps of the folio and getting to folio_clear_dirty_for_io(). Large folios on the edges of submission ranges are similarly at risk to be only partly cleared. This particular gap was introduced by a second patch in the same series: commit a4ef54dbb576 ("btrfs: make extent_range_clear_dirty_for_io() to handle sector size < page size cases") We cannot simply restore the call to folio_clear ---truncated--- | ||||
| CVE-2026-89768 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: fs: fix user path of nested backing files backing_file_open() derives the path to be stored in the new backing file from user_file->f_path. This is incorrect when user_file itself is a backing file, which is the case for nested stacking filesystems, e.g. overlayfs mounts where the lowerdir of one overlayfs is the merged directory of another. Since commit def3ae83da02 ("fs: store real path instead of fake path in backing file f_path") the f_path of a backing file holds the real path of the intermediate layer, not the path that the user opened. Commit 924577e4f6ca ("ovl: Fix nested backing file paths") fixed this for such configurations by passing file_user_path() from ovl_open_realfile(). However, commit 6af36aeb147a ("lsm: add backing_file LSM hooks") changed the first argument of backing_file_open() from the user path back to the user file and derived the path from user_file->f_path again, silently re-introducing the problem. As a result, files mapped through a nested overlayfs show the wrong path in /proc/<pid>/maps and in perf/ftrace mmap records. For example, with two nested overlayfs mounts: mkdir -p /ovl/{lower,upper,work,merged} /ovl/nested echo hello > /ovl/lower/foo mount -t overlay overlay \ -o lowerdir=/ovl/lower,upperdir=/ovl/upper,workdir=/ovl/work \ /ovl/merged # at least two lowerdirs are needed when upperdir is nonexistent mount -t overlay overlay \ -o lowerdir=/ovl/merged:/ovl/lower /ovl/nested mapping /ovl/nested/foo shows a disconnected path instead of the user path: # readlink /proc/self/fd/3 /ovl/nested/foo # grep foo /proc/self/maps 7f6e2c100000-7f6e2c101000 r--s 00000000 00:24 15813027 /foo The bogus path is derived from the f_path of the intermediate backing file, whose mount is a private clone that d_path() cannot resolve. Fix this by using file_user_path(), which returns the outermost user-visible path for backing files and falls back to &user_file->f_path for regular files. This restores the behavior of commit 924577e4f6ca ("ovl: Fix nested backing file paths") for overlayfs and also fixes the same problem for the other backing_file_open() callers, fuse passthrough and erofs ishare, when their user file is itself a backing file. backing_tmpfile_open() has the same pattern but is not affected: it is only called by ovl_create_tmpfile() for the upper layer, and another overlayfs is rejected as upperdir by the DCACHE_OP_REAL check in ovl_mount_dir_check(), so its user_file can never be a backing file. | ||||
| CVE-2026-89737 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: thunderbolt: Disable work before freeing tbt on remove tbt_altmode_remove() drops the plug and cable references without draining tbt->work. The work function dereferences those references, and can also requeue itself in its error path. The VDM callbacks can queue the same work item. Disable and drain tbt->work before dropping the references. This waits for an existing invocation and prevents subsequent schedule_work() calls from queueing it during teardown. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-89722 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io() pci_write_legacy_io() loads 4 bytes from the kernfs write buffer regardless of how many bytes userspace wrote: if (count != 1 && count != 2 && count != 4) return -EINVAL; return pci_legacy_write(bus, off, *(u32 *)buf, count); kernfs_fop_write_iter() allocates the buffer with kmalloc(len + 1), so a 1-byte write to the legacy_io sysfs file allocates 2 bytes and the unconditional u32 load reads up to 2 bytes past the end of the allocation, which KASAN reports as a slab-out-of-bounds read. Similarly, a 2-byte write overreads by 1 byte. Thus, read only the number of bytes requested using get_unaligned_le16() and get_unaligned_le32() for the 2 and 4 byte cases, interpreting the buffer as little-endian to match the byte ordering of PCI I/O port space. The PowerPC implementation previously compensated for the generic code's native-endian 32-bit load by shifting the value into place for the 1 and 2 byte cases. The shifts were only correct on big-endian kernels. On little-endian PowerPC (POWER8 and later), they extracted the wrong bytes, so a 1-byte write wrote an out-of-bounds byte instead of the requested value. On big-endian, the native load also caused out_le16() and out_le32() to reverse the user's bytes on the wire for 2 and 4 byte writes. The little-endian helpers resolve both issues, so the shifts are removed. No changes are needed for the Alpha platform. The legacy_io file is root-only and exists only on Alpha and PowerPC, the two architectures that define HAVE_PCI_LEGACY. | ||||
| CVE-2026-89721 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: rockchip-samsung-dcphy: fix out-of-range max_register The PHY register block is 64KB, so with a register stride of 4 the last accessible register sits at offset 0xfffc. max_register names 0x10000, one register past the end of the mapping: dumping the registers through the regmap debugfs interface reads beyond the ioremapped region and oopses on the unmapped page. The oops fires with the regmap lock held, so later PHY operations deadlock. | ||||