| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR set pinned push error path
Add destruction of FRMR handles in case the push to the pool fails.
This prevents resources leak in case pool page allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: Dont expose folded kernel pointers
The flow classifier falls back to addr_fold() for fields that are missing
from packet headers. In map mode, userspace controls mask, xor, rshift,
addend and divisor, and can observe the resulting classid through class
statistics. This allows a tc classifier in a user/network namespace to
recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct().
Align with standard kernel practices for pointer hashing and replace the
XOR folding with a keyed siphash (which is cryptographically secure) |
| In the Linux kernel, the following vulnerability has been resolved:
net: pfcp: allocate per-cpu tstats for PFCP netdevs
PFCP uses dev_get_tstats64() as its ndo_get_stats64 callback, but
pfcp_link_setup() does not request NETDEV_PCPU_STAT_TSTATS. The net
core therefore leaves dev->tstats NULL for PFCP devices.
Creating a PFCP rtnetlink device can immediately ask the new netdev for
stats while building the RTM_NEWLINK notification. That reaches
dev_get_tstats64() and dereferences the NULL dev->tstats pointer.
Set pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS during PFCP link setup so
the net core allocates the storage expected by dev_get_tstats64(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fill first free targets[] slot during auto-discovery
Any invalid endpoint decoder pointer in the target array of an active
region is not allowed by cxl driver. This means cxl driver always
assumes the first p->nr_targets entries of the target array in an
auto-assembly region are valid. However, there are scenarios that could
leave NULL endpoint decoder pointer holes in the target array.
1. When cxl_cancel_auto_attach() removes an endpoint decoder from a
target array, the target slot is set to NULL. If the removed endpoint
decoder is not the last element in the target array, the target array
will contain a NULL hole.
2. When a auto-assembly region removes an assigned endpoint decoder, if
the removed endpoint decoder is not the last element in the target
array, always remains a NULL hole in the target array.
When a NULL pointer hole exists in a region's target array, it
introduces two potential problems:
1. Access an endpoint decoder via a NULL pointer. it always trigger
calltrace like that.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI
RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core]
Call Trace:
<TASK>
cxl_region_attach+0xc50/0x2140 [cxl_core]
cxl_add_to_region+0x321/0x2330 [cxl_core]
discover_region+0x92/0x150 [cxl_port]
device_for_each_child+0xf3/0x170
cxl_port_probe+0x150/0x200 [cxl_port]
cxl_bus_probe+0x4f/0xa0 [cxl_core]
really_probe+0x1c8/0x960
__driver_probe_device+0x323/0x450
driver_probe_device+0x45/0x120
__device_attach_driver+0x15d/0x280
bus_for_each_drv+0x10f/0x190
2. Not having enough valid endpoint decoders attached to an
auto-assembly region. if an auto-assembly region is created with lock
flag or assigned endpoint decoder with lock flag, which means
assigned endpoint decoder will not be reset during detaching, they
could re-attach to the auto-assembly region again. But cxl region
driver relies on p->nr_targets to verify whether the required number
of endpoint decoders has been attached, and NULL endpoint decoder
pointers are still counted in that case.
To fix above issues, adjust cxl_region_attach_auto() logic to find the
first free target slot for endpoint decoder attachment, this ensures
NULL holes in the target array are filled, rather than adding new
endpoint decoders at the tail of the target array. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_dualpi2: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever dualpi2 drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will be
executed even though dualpi2 still has 1 packet on the queue and, thus,
mistakenly deactivates the parent's class which leads to a null-ptr-deref:
[ 101.427314][ T599] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 101.427755][ T599] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 101.428048][ T599] CPU: 2 UID: 0 PID: 599 Comm: ping Not tainted 7.1.0-rc5-00284-gbce53c430ed7 #102 PREEMPT(full)
[ 101.428400][ T599] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 101.428608][ T599] RIP: 0010:qfq_dequeue (net/sched/sch_qfq.c:1150) sch_qfq
[ 101.428821][ T599] Code: 00 fc ff df 80 3c 02 00 0f 85 46 0c 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 2d 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
All code
[ 101.429348][ T599] RSP: 0018:ffff8881110df4f0 EFLAGS: 00010216
[ 101.429541][ T599] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 101.429763][ T599] RDX: 0000000000000009 RSI: 00000024c0000000 RDI: ffff88811436c2b0
[ 101.429985][ T599] RBP: ffff88811436c000 R08: ffff88811436c280 R09: 1ffff11021277523
[ 101.430206][ T599] R10: 1ffff11021277526 R11: 1ffff11021277527 R12: 00000024c0000000
[ 101.430423][ T599] R13: ffff88811436c2b8 R14: 0000000000000048 R15: 0000000020000000
[ 101.430642][ T599] FS: 00007f61813e1c40(0000) GS:ffff8881691ef000(0000) knlGS:0000000000000000
[ 101.430913][ T599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 101.431100][ T599] CR2: 00005651650850a8 CR3: 000000010ca0b000 CR4: 0000000000750ef0
[ 101.431320][ T599] PKRU: 55555554
[ 101.431433][ T599] Call Trace:
[ 101.431544][ T599] <TASK>
[ 101.431628][ T599] __qdisc_run (net/sched/sch_generic.c:322 net/sched/sch_generic.c:427 net/sched/sch_generic.c:445)
[ 101.431792][ T599] ? dev_qdisc_enqueue (./include/trace/events/qdisc.h:49 (discriminator 22) net/core/dev.c:4176 (discriminator 22))
[ 101.431941][ T599] __dev_queue_xmit (./include/net/pkt_sched.h:120 ./include/net/pkt_sched.h:117 net/core/dev.c:4292 net/core/dev.c:4831)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: initialize gdma queue id to INVALID_QUEUE_ID
mana_gd_create_mana_wq_cq() leaves queue->id as 0 (from kzalloc_obj())
until mana_create_wq_obj() assigns the firmware-returned id. If creation
fails before that, cleanup calls mana_gd_destroy_cq() with id 0, NULLing
gc->cq_table[0] and silently breaking whichever real CQ owns that slot.
Initialize queue->id to INVALID_QUEUE_ID right after allocation, matching
mana_gd_create_eq(). The existing (id >= max_num_cqs) guard then
short-circuits cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: check skb_clone in control TX
t7xx_port_ctrl_tx() clones each skb fragment before passing it to the
port transmit path. The clone is used immediately to set cloned->len, so
an skb_clone() failure results in a NULL pointer dereference.
Check the clone before using it. If previous fragments were already
queued, preserve the driver's existing partial-write behavior by
returning the number of bytes submitted so far. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid displaying the kernel pointer
While dumping the info on MR using the rdma tool, we
dump the mr_hwq which is a kernel pointer. There is
no need to expose this value for end user. So avoid
it. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt
The null-pointer-guard was incorrect, returning _FAIL on valid pointer.
Invert the guard, so it returns _FAIL on invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: video: avoid double free on video register failure
comp_register_videodev() allocates a video_device with
video_device_alloc() and releases it if video_register_device() fails.
This can double free the video_device when __video_register_device()
reaches device_register() and that call fails:
video_register_device()
-> __video_register_device()
-> device_register() fails
-> put_device(&vdev->dev)
-> v4l2_device_release()
-> vdev->release(vdev)
-> video_device_release(vdev)
comp_register_videodev()
-> video_device_release(mdev->vdev)
Use video_device_release_empty() while registering the device so that
registration failure paths do not free mdev->vdev through vdev->release().
comp_register_videodev() then releases mdev->vdev exactly once on failure.
Restore video_device_release() after successful registration so the
registered device keeps its normal lifetime handling.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: magnetometer: ak8975: fix potential kernel stack memory leak
Currently in the AK8975 driver there are four instances where potential
uninitialized kernel stack memory leaks can occur. If
i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than
the size of the buffer, uninitialized bytes are retained in the buffer
and later the buffer is passed on to IIO buffers, potentially leaking
memory to userspace.
Fix this by adding checks whether the return value of the function is
equal to the size of the buffer and subsequently if the value is
lesser than zero to distinguish from a returned error code. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc
Use axi_dmac_free_desc() to free fully the descriptor at fail path when
call axi_dmac_alloc_desc() in axi_dmac_prep_peripheral_dma_vec(). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor
For architectures like Microblaze or arm64 (where this IP is used),
DMA_DIRECT_REMAP is set which means that dma_alloc_coherent() might
remap (and hence vmalloc()) some memory. This became visible in a design
where dma_direct_use_pool() is not possible.
With the above, when calling dma_free_coherent(), vunmap() would be
called from softirq context and thus leading to a BUG().
To fix it, use a dma pool that is allocated in
.device_alloc_chan_resources() and allocate blocks from it. The key
point is that now dma_pool_free() is used in axi_dmac_free_desc() to
free the blocks and that just frees the blocks from the pool in the
sense they can be used again. In other words, no actual call to
dma_free_coherent() happens. That only happens when destroying the pool
in axi_dmac_free_chan_resources() which does not happen in any interrupt
context. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Check frwr_wp_create() during connect
frwr_wp_create() creates the singleton Memory Region used to encode
padding for Write chunks whose payload length is not XDR-aligned. Its
failure paths return a negative errno and leave ep->re_write_pad_mr set
to NULL.
rpcrdma_xprt_connect() currently ignores that return value. If
frwr_wp_create() fails after the rest of the connection setup succeeds,
xprt_rdma_connect_worker() treats the connection attempt as successful
and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned
receive page length reaches rpcrdma_encode_write_list(), passes the NULL
write-pad MR to encode_rdma_segment(), and dereferences it.
This is locally triggerable on an NFS/RDMA client after a connect or
reconnect hits a local MR allocation, DMA-map, MR-map, or post-send
failure; a remote peer alone cannot force the local MR setup failure.
Check the return value and fail the connect as -ENOTCONN, matching the
adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the
normal reconnect path retry. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL pointer dereference in unpack_pdb
pdb->dfa could be NULL if unpack_dfa fails, causing a NULL pointer
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fail policy unpack on accept2 allocation failure
unpack_pdb() may need to allocate a missing ACCEPT2 table for older policy
data. If that allocation failed, it set an error message but jumped to the
success path, returning a policydb with the required table missing.
Return -ENOMEM through the normal failure path when the ACCEPT2 allocation
fails. Remove the now-unused out label. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix leak of SQ timestamp buffer on teardown
The send-queue timestamp ring is allocated with qmem_alloc() when
timestamping is used, but otx2_free_sq_res() never freed sq->timestamps,
leaking that memory across ifdown and device removal. Add the missing
qmem_free() alongside the other SQ companion buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints
MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A
later setup failure can still jump to snd_usb_midi_v2_free(), which
currently frees each endpoint and its coherent URB buffers without first
stopping the submitted URBs. A completion can then dereference the
embedded URB context and endpoint state after they have been freed, or
try to resubmit from the stale endpoint.
This was observed as a KASAN slab-use-after-free in
input_urb_complete().
The buggy scenario involves two paths, with each column showing the order
within that path:
probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.
Make the endpoint destructor follow the same teardown ordering used for
disconnect when the endpoint has not already been disconnected: publish
ep->disconnected, kill the URBs synchronously, and drain the endpoint
before freeing URB buffers and endpoint storage. The guard avoids
repeating the stop sequence after the normal
snd_usb_midi_v2_disconnect_all() path, while still synchronizing the
direct MIDI 2.0 create-error free path.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x5f0
input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__usb_hcd_giveback_urb+0x112/0x1d0
dummy_timer+0xaaa/0x19a0
lock_is_held_type+0x9a/0x110
__lock_acquire+0x467/0x28b0
mark_held_locks+0x40/0x70
_raw_spin_unlock_irqrestore+0x44/0x60
lockdep_hardirqs_on_prepare+0xbb/0x1a0
__hrtimer_run_queues+0x101/0x520
hrtimer_run_softirq+0xd0/0x130
handle_softirqs+0x15b/0x670
__irq_exit_rcu+0xd0/0x170
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
When a read is retried, raid1_read_request() may be called with a
pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT
read, the bio is completed and the function returns immediately. In this
case the existing r1_bio is leaked.
This fixes a leak of pre-allocated r1_bio structures for retried reads. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm_crb: Check ACPI_COMPANION() against NULL during probe
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
tpm_crb driver. |
