| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SvelteKit versions from 2.49.0 through 2.53.2 (fixed in 2.53.3) contain a deserialization expansion issue in the experimental form remote function. When an application enables experimental.remoteFunctions and uses the form function to process the files array without validating files.length or individual file sizes, an attacker can submit relatively small inputs that expand into very large file arrays, leading to expensive processing and denial of service. |
| A security flaw has been discovered in NASA cFS up to 7.0.1. The affected element is the function CFE_SB_GetUserDataLength of the file src/cFS/cfe/modules/sb/fsw/src/cfe_sb_util.c of the component cFE Software Bus. Performing a manipulation of the argument TotalMsgSize/HdrSize results in integer underflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in SiteServer SSCMS 7.4.0. Affected by this issue is some unknown functionality of the component Agent Installation Workflow. Performing a manipulation of the argument SecurityKey results in improper access controls. Remote exploitation of the attack is possible. The attack is considered to have high complexity. The exploitation is known to be difficult. The project was informed of the problem early through an issue report but has not responded yet. |
| ### Summary
When `qs.parse` is called with `comma: true` and `throwOnLimitExceeded: true`, a comma-separated value under a bracket-push key (`a[]=1,2,3,4`) is split into an array without being compared against `arrayLimit`, while the same value under a flat key (`a=1,2,3,4`), an indexed key (`a[0]=`), a nested key (`a[b]=`), or a dotted key (`a.b=` with `allowDots`) throws the documented `RangeError`. A single parameter such as `a[]=1,2,2,...` therefore produces an inner array of arbitrary length even though the caller opted into the hard limit. This is the `[]=` key form that the fix for CVE-2026-2391 (qs 6.14.2) did not cover.
### Details
In `lib/parse.js`, a comma-separated value under a `[]=` key is split and then wrapped as a single nested element (`val = [val]`, so that each `a[]=x,y` group counts as one element of the outer array). The `arrayLimit` check that 6.14.2 added for comma values runs after that wrap, so for `[]=` parts it only ever saw the wrapper of length 1. 6.15.3 added a pre-split comma count so that an oversized value throws before it is allocated, but gated it on an `isFlatArrayValue` flag that `parseValues` set to `false` for any part containing `[]=`, and did not pass it for object-valued input, so the gap remained.
#### PoC
```js
var qs = require('qs');
var options = { comma: true, arrayLimit: 3, throwOnLimitExceeded: true };
qs.parse('a=1,2,3,4', options); // RangeError: Array limit exceeded. Only 3 elements allowed in an array.
qs.parse('a[]=1,2,3,4', options); // { a: [ [ '1', '2', '3', '4' ] ] } (no throw)
qs.parse('a[]=' + '1,'.repeat(1000000) + '1', { comma: true, arrayLimit: 20, throwOnLimitExceeded: true });
// no throw; a 1,000,001-element inner array is allocated
```
#### Fix
`lib/parse.js`, applied in 8859c37 on `main` and released as v6.16.0: the `isFlatArrayValue` gate is removed, so every comma-split value is counted against `arrayLimit` before splitting regardless of key form. An in-limit group under `a[]=` still counts as one element of the outer array, and the default (`throwOnLimitExceeded: false`) path is unchanged.
### Affected versions
`>=6.14.2 <6.16.0`, fixed in v6.16.0.
v6.14.2 introduced `arrayLimit` enforcement for comma values (the fix for CVE-2026-2391) but only for values not under a `[]=` key, and every release from v6.14.2 through v6.15.3 has the same gap. v6.14.0 and v6.14.1, where `throwOnLimitExceeded` exists but does not apply to any comma form, are covered by CVE-2026-2391 rather than this record. Earlier lines (6.7.x through 6.13.x) have `comma` but no `throwOnLimitExceeded`, so there is no hard cap on any comma path to bypass; releases before 6.7.0 have no `comma` option.
### Impact
An unauthenticated attacker who can reach an application that parses untrusted query strings or urlencoded bodies with both `comma: true` and `throwOnLimitExceeded: true` (both non-default) can bypass the configured limit with a single `a[]=` parameter and force the parser to allocate an array proportional to the request size. The cost is strictly linear in the attacker-supplied bytes (about 0.1 microseconds and 6 to 7 retained bytes per input byte; the same out-of-memory threshold as the documented default `throwOnLimitExceeded: false` path), so a transport-layer request or body size limit bounds it completely (and node's default maximum HTTP header size of 16 KB already bounds the request line, so multi-megabyte payloads need a body parser). The impact is that an opt-in hard limit fails open on one key spelling, not unbounded allocation from a small input. |
| Cleartext Storage of Sensitive Information vulnerability in ash-project ash_paper_trail allows an attacker with read access to the generated version resource to recover the plaintext of sensitive? attributes.
AshPaperTrail stores the values of tracked sensitive? attributes in the generated version resource's changes map, which is declared public? true and sensitive? false, so the values are returned by the version resource's default read action and printed in logs, inspect output, and error messages instead of being redacted. AshPaperTrail.Resource.Transformers.CreateVersionResource derives the changes map's sensitivity from the ignore_attributes list (the attributes excluded from changes) rather than from the tracked attributes actually stored in it, and ignore_attributes defaults to empty, so the flag is effectively always false.
This issue affects ash_paper_trail: from 0.1.1 before 0.7.0. |
| A path traversal flaw was found in SSSD's AD GPO provider. The ad_gpo_extract_smb_components() function does not sanitize .. sequences in the gPCFileSysPath LDAP attribute, allowing an attacker with AD GPO management access to write files outside the GPO cache directory as root. On default RHEL configurations with SELinux enforcing, this can be used to inject Kerberos configuration leading to authentication bypass. |
| A Use-After-Free vulnerability has been discovered in GRUB's gettext module. This flaw stems from a programming error where the gettext command remains registered in memory after its module is unloaded. An attacker can exploit this condition by invoking the orphaned command, causing the application to access a memory location that is no longer valid. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded. |
| A vulnerability was detected in coppermine-gallery Coppermine Photo Gallery up to 1.6.28. This impacts an unknown function of the file db_input.php of the component Hidden Album Update Endpoint. The manipulation results in cross site scripting. The attack can be launched remotely. The exploit is now public and may be used. Upgrading to version 1.6.29 will fix this issue. It is recommended to upgrade the affected component. |
| A heap-based buffer overflow problem was found in glib through an incorrect calculation of buffer size in the g_escape_uri_string() function. If the string to escape contains a very large number of unacceptable characters (which would need escaping), the calculation of the length of the escaped string could overflow, leading to a potential write off the end of the newly allocated string. |
| A vulnerability was recently discovered in the rpc.mountd daemon in the nfs-utils package for Linux, that allows a NFSv3 client to escalate the
privileges assigned to it in the /etc/exports file at mount time. In particular, it allows the client to access any subdirectory or subtree of an exported directory, regardless of the set file permissions, and regardless of any 'root_squash' or 'all_squash' attributes that would normally be expected to apply to that client. |
| A flaw was found in QEMU. If the QIOChannelWebsock object is freed while it is waiting to complete a handshake, a GSource is leaked. This can lead to the callback firing later on and triggering a use-after-free in the use of the channel. This can be abused by a malicious client with network access to the VNC WebSocket port to cause a denial of service during the WebSocket handshake prior to the VNC client authentication. |
| A flaw was found in libxml2's xmlBuildQName function, where integer overflows in buffer size calculations can lead to a stack-based buffer overflow. This issue can result in memory corruption or a denial of service when processing crafted input. |
| A flaw was found in libssh when using the ChaCha20 cipher with the OpenSSL library. If an attacker manages to exhaust the heap space, this error is not detected and may lead to libssh using a partially initialized cipher context. This occurs because the OpenSSL error code returned aliases with the SSH_OK code, resulting in libssh not properly detecting the error returned by the OpenSSL library. This issue can lead to undefined behavior, including compromised data confidentiality and integrity or crashes. |
| A flaw was found in the libssh library in versions less than 0.11.2. An out-of-bounds read can be triggered in the sftp_handle function due to an incorrect comparison check that permits the function to access memory beyond the valid handle list and to return an invalid pointer, which is used in further processing. This vulnerability allows an authenticated remote attacker to potentially read unintended memory regions, exposing sensitive information or affect service behavior. |
| A security flaw has been discovered in itsourcecode Sales and Inventory System 1.0. Affected by this vulnerability is an unknown functionality of the file /pages/sup_edit.php. The manipulation of the argument ID results in sql injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. |
| A flaw was found in the QEMU NBD Server. This vulnerability allows a denial of service (DoS) attack via improper synchronization during socket closure when a client keeps a socket open as the server is taken offline. |
| A vulnerability was identified in Beetel 450TC3 01.00.00_01. This vulnerability affects unknown code of the component User Management. The manipulation of the argument Username leads to cross site scripting. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A Stored XSS vulnerability in the subtitle deletion flow in GazellePW (GazellePosterWall) commit 86c4bedf727691b5a97af42a4864869d18446449 allows remote authenticated users to inject arbitrary JavaScript via a crafted subtitle filename, which is stored during upload and later rendered in /subtitles.php?action=delete. |
| Uninitialized resource in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds read in Media in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
