| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211-hwsim: fix late beacon hrtimer handling
Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx
that our handling of the hrtimer here is wrong: If the timer fires
late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot)
then it tries to actually rearm the timer at the next deadline,
which might be in the past already:
1 2 3 N N+1
| | | ... | |
^ intended to fire here (1)
^ next deadline here (2)
^ actually fired here
The next time it fires, it's later, but will still try to schedule
for the next deadline (now 3), etc. until it catches up with N,
but that might take a long time, causing stalls etc.
Now, all of this is simulation, so we just have to fix it, but
note that the behaviour is wrong even per spec, since there's no
value then in sending all those beacons unaligned - they should be
aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a
bit (or a lot) late, then just resume at that point.
Therefore, change the code to use hrtimer_forward_now() which will
ensure that the next firing of the timer would be at N+1 (in the
picture), i.e. the next interval point after the current time. |
| TCPUploader module listens on Port 10651/TCP for incoming connections.
Exploitation of this vulnerability could allow a remote unauthenticated
user access to release OS version information. While this is a minor
vulnerability, it represents a method for further network
reconnaissance. |
| A vulnerability classified as problematic has been found in langhsu Mblog Blog System 3.5.0. Affected is an unknown function of the file /login. The manipulation leads to observable response discrepancy. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Hoverfly is an open source API simulation tool. In versions 1.11.3 and prior, Hoverfly’s admin WebSocket endpoint /api/v2/ws/logs is not protected by the same authentication middleware that guards the REST admin API. Consequently, an unauthenticated remote attacker can stream real-time application logs (information disclosure) and/or gain insight into internal file paths, request/response bodies, and other potentially sensitive data emitted in logs. Version 1.12.0 contains a fix for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
llc: verify mac len before reading mac header
LLC reads the mac header with eth_hdr without verifying that the skb
has an Ethernet header.
Syzbot was able to enter llc_rcv on a tun device. Tun can insert
packets without mac len and with user configurable skb->protocol
(passing a tun_pi header when not configuring IFF_NO_PI).
BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218
__netif_receive_skb_one_core net/core/dev.c:5523 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637
netif_receive_skb_internal net/core/dev.c:5723 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5782
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002
Add a mac_len test before all three eth_hdr(skb) calls under net/llc.
There are further uses in include/net/llc_pdu.h. All these are
protected by a test skb->protocol == ETH_P_802_2. Which does not
protect against this tun scenario.
But the mac_len test added in this patch in llc_fixup_skb will
indirectly protect those too. That is called from llc_rcv before any
other LLC code.
It is tempting to just add a blanket mac_len check in llc_rcv, but
not sure whether that could break valid LLC paths that do not assume
an Ethernet header. 802.2 LLC may be used on top of non-802.3
protocols in principle. The below referenced commit shows that used
to, on top of Token Ring.
At least one of the three eth_hdr uses goes back to before the start
of git history. But the one that syzbot exercises is introduced in
this commit. That commit is old enough (2008), that effectively all
stable kernels should receive this. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid data corruption caused by decline
We found a data corruption issue during testing of SMC-R on Redis
applications.
The benchmark has a low probability of reporting a strange error as
shown below.
"Error: Protocol error, got "\xe2" as reply type byte"
Finally, we found that the retrieved error data was as follows:
0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C
0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2
It is quite obvious that this is a SMC DECLINE message, which means that
the applications received SMC protocol message.
We found that this was caused by the following situations:
client server
¦ clc proposal
------------->
¦ clc accept
<-------------
¦ clc confirm
------------->
wait llc confirm
send llc confirm
¦failed llc confirm
¦ x------
(after 2s)timeout
wait llc confirm rsp
wait decline
(after 1s) timeout
(after 2s) timeout
¦ decline
-------------->
¦ decline
<--------------
As a result, a decline message was sent in the implementation, and this
message was read from TCP by the already-fallback connection.
This patch double the client timeout as 2x of the server value,
With this simple change, the Decline messages should never cross or
collide (during Confirm link timeout).
This issue requires an immediate solution, since the protocol updates
involve a more long-term solution. |
| A vulnerability in QCMS version 6.0.5 allows authenticated users to read arbitrary files from the server due to insufficient validation of the "Name" parameter in the backend template editor. By manipulating the parameter, attackers can perform directory traversal and access sensitive files outside the intended template directory, potentially exposing system configuration, PHP source code, or other sensitive information. |
| OMERO.web provides a web based client and plugin infrastructure. Prior to version 5.29.2, if an error occurred when resetting a user's password using the Forgot Password option in OMERO.web, the error message displayed on the Web page can disclose information about the user. This issue has been patched in version 5.29.2. A workaround involves disabling the Forgot password option in OMERO.web using the omero.web.show_forgot_password configuration property. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tun: fix tun_napi_alloc_frags()
syzbot reported the following crash [1]
Issue came with the blamed commit. Instead of going through
all the iov components, we keep using the first one
and end up with a malformed skb.
[1]
kernel BUG at net/core/skbuff.c:2849 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848
Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293
RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00
RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000
RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c
R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50
R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80
FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284
tipc_aead_decrypt net/tipc/crypto.c:894 [inline]
tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844
tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109
tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668
__netif_receive_skb_list_ptype net/core/dev.c:5720 [inline]
__netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762
__netif_receive_skb_list net/core/dev.c:5814 [inline]
netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905
gro_normal_list include/net/gro.h:515 [inline]
napi_complete_done+0x2b5/0x870 net/core/dev.c:6256
napi_complete include/linux/netdevice.h:567 [inline]
tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057
do_iter_readv_writev+0x600/0x880
vfs_writev+0x376/0xba0 fs/read_write.c:1050
do_writev+0x1b6/0x360 fs/read_write.c:1096
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| Vite, a provider of frontend development tooling, has a vulnerability in versions prior to 6.2.3, 6.1.2, 6.0.12, 5.4.15, and 4.5.10. `@fs` denies access to files outside of Vite serving allow list. Adding `?raw??` or `?import&raw??` to the URL bypasses this limitation and returns the file content if it exists. This bypass exists because trailing separators such as `?` are removed in several places, but are not accounted for in query string regexes. The contents of arbitrary files can be returned to the browser. Only apps explicitly exposing the Vite dev server to the network (using `--host` or `server.host` config option) are affected. Versions 6.2.3, 6.1.2, 6.0.12, 5.4.15, and 4.5.10 fix the issue. |
| go-gh is a Go module for interacting with the `gh` utility and the GitHub API from the command line. A security vulnerability has been identified in `go-gh` that could leak authentication tokens intended for GitHub hosts to non-GitHub hosts when within a codespace. `go-gh` sources authentication tokens from different environment variables depending on the host involved: 1. `GITHUB_TOKEN`, `GH_TOKEN` for GitHub.com and ghe.com and 2. `GITHUB_ENTERPRISE_TOKEN`, `GH_ENTERPRISE_TOKEN` for GitHub Enterprise Server. Prior to version `2.11.1`, `auth.TokenForHost` could source a token from the `GITHUB_TOKEN` environment variable for a host other than GitHub.com or ghe.com when within a codespace. In version `2.11.1`, `auth.TokenForHost` will only source a token from the `GITHUB_TOKEN` environment variable for GitHub.com or ghe.com hosts. Successful exploitation could send authentication token to an unintended host. This issue has been addressed in version 2.11.1 and all users are advised to upgrade. Users are also advised to regenerate authentication tokens and to review their personal security log and any relevant audit logs for actions associated with their account or enterprise. |
| Improper Input Validation vulnerability in Hallo Welt! GmbH BlueSpice (Extension:CognitiveProcessDesigner) allows Cross-Site Scripting (XSS).This issue affects BlueSpice: from 5 through 5.1.1. |
| ZimaOS is a fork of CasaOS, an operating system for Zima devices and x86-64 systems with UEFI. In version 1.2.4 and all prior versions, the API endpoint `http://<Server-IP>/v1/users/login` in ZimaOS returns distinct responses based on whether a username exists or the password is incorrect. This behavior can be exploited for username enumeration, allowing attackers to determine whether a user exists in the system or not. Attackers can leverage this information in further attacks, such as credential stuffing or targeted password brute-forcing. As of time of publication, no known patched versions are available. |
| ZimaOS is a fork of CasaOS, an operating system for Zima devices and x86-64 systems with UEFI. In version 1.2.4 and all prior versions, the API endpoints in ZimaOS, such as `http://<Server-IP>/v1/users/image?path=/var/lib/casaos/1/app_order.json` and `http://<Server-IP>/v1/users/image?path=/var/lib/casaos/1/system.json`, expose sensitive data like installed applications and system information without requiring any authentication or authorization. This sensitive data leak can be exploited by attackers to gain detailed knowledge about the system setup, installed applications, and other critical information. As of time of publication, no known patched versions are available. |
| Umbraco is an ASP.NET CMS. In versions 13.0.0 through 13.9.2, 15.0.0 through 15.4.1 and 16.0.0 through 16.1.0, the content delivery API can be restricted from public access where an API key must be provided in a header to authorize the request. It's also possible to configure output caching, such that the delivery API outputs will be cached for a period of time, improving performance. There's an issue when these two things are used together, where caching doesn't vary by the header that contains the API key. As such, it's possible for a user without a valid API key to retrieve a response for a given path and query if it has recently been requested and cached by request with a valid key. This is fixed in versions 13.9.3, 15.4.4 and 16.1.1. |
| Improper validation of certain metadata input may result in the server not correctly serialising BSON. This can be performed pre-authentication and may cause unexpected application behavior including unavailability of serverStatus responses. This issue affects MongoDB Server v7.0 versions prior to 7.0.6, MongoDB Server v6.0 versions prior to 6.0.14 and MongoDB Server v.5.0 versions prior to 5.0.25.
|
| The BWOCXRUN.BwocxrunCtrl.1 control contains a method named
OpenUrlToBufferTimeout. This method takes a URL as a parameter and
returns its contents to the caller in JavaScript. The URLs are accessed
in the security context of the current browser session. The control does
not perform any URL validation and allows file:// URLs that access the
local disk.
The method can be used to open a URL (including file URLs) and read
the URLs through JavaScript. This method could also be used to reach any
arbitrary URL to which the browser has access. |
| The BWOCXRUN.BwocxrunCtrl.1 control contains a method named
“OpenUrlToBuffer.” This method takes a URL as a parameter and returns
its contents to the caller in JavaScript. The URLs are accessed in the
security context of the current browser session. The control does not
perform any URL validation and allows “file://” URLs that access the
local disk.
The method can be used to open a URL (including file URLs) and read
file URLs through JavaScript. This method could also be used to reach
any arbitrary URL to which the browser has access. |
| Keystone is a content management system for Node.js. Prior to version 6.5.0, `{field}.isFilterable` access control can be bypassed in `update` and `delete` mutations by adding additional unique filters. These filters can be used as an oracle to probe the existence or value of otherwise unreadable fields. Specifically, when a mutation includes a `where` clause with multiple unique filters (e.g. `id` and `email`), Keystone will attempt to match records even if filtering by the latter fields would normally be rejected by `field.isFilterable` or `list.defaultIsFilterable`. This can allow malicious actors to infer the presence of a particular field value when a filter is successful in returning a result. This affects any project relying on the default or dynamic `isFilterable` behavior (at the list or field level) to prevent external users from using the filtering of fields as a discovery mechanism. While this access control is respected during `findMany` operations, it was not completely enforced during `update` and `delete` mutations when accepting more than one unique `where` values in filters. This has no impact on projects using `isFilterable: false` or `defaultIsFilterable: false` for sensitive fields, or for those who have otherwise omitted filtering by these fields from their GraphQL schema. This issue has been patched in `@keystone-6/core` version 6.5.0. To mitigate this issue in older versions where patching is not a viable pathway, set `isFilterable: false` statically for relevant fields to prevent filtering by them earlier in the access control pipeline (that is, don't use functions); set `{field}.graphql.omit.read: true` for relevant fields, which implicitly removes filtering by these fields from the GraphQL schema; and/or deny `update` and `delete` operations for the relevant lists completely. |
| The CG Automation Software DNP3 driver, used in the ePAQ-9410 Substation
Gateway products, does not validate input correctly. An attacker could
cause the software to go into an infinite loop, causing the process to
crash. The system must be restarted manually to clear the condition. |
