| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Scriban before 7.0.0 fails to clear the CachedTemplates dictionary when TemplateContext.Reset() is called, allowing cached templates to persist across reused contexts. Attackers can exploit request-dependent ITemplateLoader implementations to access previously authorized template content from earlier renders without triggering TemplateLoader.Load() again. |
| Scriban before 6.6.0 contains an infinite recursion vulnerability in object rendering when the ObjectRecursionLimit property defaults to unlimited. Attackers can supply circular reference objects to the template context, exhausting stack space and triggering an uncatchable StackOverflowException that terminates the hosting process. |
| A security vulnerability has been identified in the Planet9 desktop application where a hardcoded read-only API key permitted unauthorized access to internal repositories. An attacker could exploit this access to extract embedded administrative keys and secrets, potentially allowing them to gain administrative access to repository infrastructure and modify software source code. To mitigate this security risk, Acer has released an update to resolve the issue. |
| A security vulnerability has been identified in Planet9 due to incorrect file permissions assigned to an application executable used by the Planet9 background service. The service runs with SYSTEM privileges, while the affected executable grants excessive permissions to non-administrative users. As a result, an authenticated local user could potentially modify or replace the executable and execute arbitrary code with SYSTEM privileges when the service starts or the system is restarted. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry
device_pasid_table_teardown() zeroes the 128-bit scalable-mode context
entry with context_clear_entry() while the Present bit is still set. This
creates a window where the hardware can fetch a torn entry, with some
fields already zeroed while Present is still set, leading to unpredictable
behavior or spurious faults. The context-cache invalidation is issued only
after the entry has been zeroed, and intel_pasid_free_table() then frees
the PASID directory pages, so the IOMMU can keep walking a stale Present=1
entry that points at freed memory.
While x86 provides strong write ordering, the compiler may reorder the two
64-bit writes to the entry, and the hardware fetch is not guaranteed to be
atomic with respect to multiple CPU writes.
Commit c1e4f1dccbe9d ("iommu/vt-d: Clear Present bit before tearing down
context entry") fixed this exact pattern in domain_context_clear_one() and
the copied-context path, but device_pasid_table_teardown() was not
converted.
Align it with the "Guidance to Software for Invalidations" in the VT-d
spec, Section 6.5.3.3, using the same ownership handshake as the sibling
fix: clear only the Present bit, flush it to the IOMMU, perform the
context-cache invalidation, and only then zero the rest of the entry. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
(cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) |
| In the Linux kernel, the following vulnerability has been resolved:
configfs_lookup(): don't leave ->s_dentry dangling on failure
Normally ->s_dentry is cleared when dentry it's pointing to becomes
negative (on eviction, realistically). However, that only happens
if dentry gets to be positive in the first place; in case of inode
allocation failure dentry never becomes positive, so ->d_iput()
is not called at all.
We do part of what normally would've been done by configfs_d_iput()
(dropping the reference to configfs_dirent) manually, but we do
not clear ->s_dentry there. Sloppy as it is, it does not matter in
case of configfs_create_{dir,link}() - there configfs_dirent does
not survive dropping the sole reference to it.
However, for configfs_lookup() it *does* survive, with a dangling
pointer to soon to be freed dentry sitting it its ->s_dentry.
Subsequent getdents(2) in that directory will end up dereferencing
that pointer in order to pick the inode number. Use after free...
This is the minimal fix; the right approach is to set the linkage
between dentry and configfs_dirent only after we know that we have
an inode, but that takes more surgery and the bug had been there
since 2006, so... |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Handle preemption in BTT lane acquisition
BTT lanes serialize access to per-lane metadata and workspace state
during BTT I/O. The btt-check unit test reports data mismatches during
BTT writes due to a race in lane acquisition that can lead to silent
data corruption.
The existing lane model uses a spinlock together with a per-CPU
recursion count. That recursion model stopped being valid after BTT
lanes became preemptible: another task can run on the same CPU,
observe a non-zero recursion count, bypass locking, and use the same
lane concurrently.
BTT lanes are also held across arena_write_bytes() calls. That path
reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush().
Some provider flush callbacks can sleep, making a spinlock the wrong
primitive for the lane lifetime.
Replace the spinlock-based recursion model with a dynamically
allocated per-lane mutex array and take the lane lock
unconditionally.
Add might_sleep() to catch any future atomic-context caller.
Found with the ndctl unit test btt-check.sh. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix inconsistent arvif state in vdev_create error paths
ath12k_mac_vdev_create() has three error path issues that leave arvif
in an inconsistent state:
1. When ath12k_wmi_vdev_create() fails, the function returns directly
without clearing arvif->ar, which was already set before the WMI
call. Subsequent code checking arvif->ar to determine vdev readiness
will see a non-NULL value despite no vdev existing in firmware.
2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the
code jumped to err: skipping the DP peer cleanup and vdev rollback,
leaving num_created_vdevs, vdev maps and arvif list membership live.
3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to
err_vdev_del: skipping the DP peer cleanup.
Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead
of returning directly, routing both err_peer_del failure paths through
err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating
the arvif state cleanup at err:.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: reset read_slot when reusing r10bio for discard
put_all_bios() always drops devs[i].bio, but it only drops
devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an
r10bio that was previously used for a read, read_slot can still be
non-negative, and discard cleanup can skip bio_put() on repl_bio.
Reset read_slot to -1 when preparing an r10bio for discard so the
replacement bio is always released correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure
mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with
mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path
through mlx5r_umr_unmap_free_xlt().
After mlx5_odp_populate_xlt() became fallible, its error path returned
directly and skipped that cleanup. This leaks the XLT DMA mapping and
buffer. If the emergency XLT page was used, it also leaves
xlt_emergency_page_mutex locked.
Break out of the loop so execution falls through the existing cleanup path. |
| A flaw was found in Red Hat Quay's external Lightweight Directory Access Protocol (LDAP) authentication handling. When an LDAP referral is returned during authentication, the system does not properly escape the username input. This allows an attacker to inject LDAP filter metacharacters, enabling user-existence oracle attacks at the referral Directory Name (DN). This could also potentially influence which DN is used for password binding in multi-domain Active Directory environments. |
| SiYuan versions before v3.7.4 fail to validate or escape annotation fields written to disk by the setFileAnnotation endpoint. Attackers can inject malicious markup into annotation fields that execute as script in the PDF renderer with full Node.js access when a user opens an annotated PDF. |
| SiYuan before v3.7.4 fails to properly escape database menu metadata in HTML interpolation, allowing stored values to execute script when users open group, view, or field-edit menus. Attackers can inject markup through field descriptions or names that close containing elements and execute arbitrary code via event handlers, reaching Node built-ins due to Electron's insecure configuration. |
| SiYuan versions before v3.7.4 contain a remote code execution vulnerability in the Template calculation operator, which renders user-authored Go templates and stores output verbatim without sanitization. Attackers can inject malicious HTML and JavaScript into template calculations that execute in the desktop client renderer with Node integration enabled, allowing arbitrary code execution when the database is opened. |
| SiYuan before v3.7.4 improperly restricts excessive authentication attempts in the CheckAuth() middleware. The HTTP Basic Authentication branch, which guards nearly the entire /api/* surface, accepts the workspace access code (Conf.AccessAuthCode) as the Basic Auth password but never consults the CAPTCHA/lockout gate or increments the failure counter used by the cookie/session login path. This allows unauthenticated remote attackers to brute-force the admin access code with unlimited automated requests and obtain full RoleAdministrator access to the kernel. A secondary weakness exists because the access code is compared using a non-constant-time string comparison. |
| siyuan versions <= 3.7.3 (fixed in v3.7.4) contain a server-side template injection vulnerability in the attribute-view Template calculation feature (introduced in v3.7.0-beta.1). The feature's template engine uses Sprig's unmodified function map, which still exposes the env, expandenv, and getHostByName functions that were removed elsewhere for CVE-2024-55660. A local, unauthenticated attacker (the kernel binds to 127.0.0.1 by default with no per-UID access control) can inject a malicious Template calculation formula to read environment variables belonging to the account running siyuan — including from a separate, unprivileged OS account — and to perform DNS lookups from the server's network position. |
| SiYuan versions before v3.7.4 contain an authentication bypass vulnerability in the WebSocket endpoint caused by differential parsing of query parameters between authentication exemption and session quarantine checks. Unauthenticated attackers can craft a malicious WebSocket URI with duplicated query parameters to bypass access auth code validation and receive the live kernel event stream including document identifiers, titles, and operation logs. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
The sg_cleanup error path used list[i] instead of list[j] when unmapping
DMA buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Stop leased rxq before uninstalling its memory provider
netif_rxq_cleanup_unlease() tears down the memory provider that was
installed on a physical RX queue through a netkit queue lease. It
currently revokes the provider's DMA mappings before stopping the
physical queue:
__netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */
__netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */
This inverts the ordering used by the regular teardown paths (normal
device unregister and the io_uring zcrx close path), which stop the
queue before revoking the provider's mappings.
With the physical queue still live, its NAPI can keep consuming
net_iov entries from the page_pool alloc cache after the
__netif_mp_uninstall_rxq() has already cleared their dma_addr,
opening a window for the device to DMA to a stale or zero address.
Fix it by swapping the two calls so the queue is stopped (and its
NAPI quiesced) before the provider is uninstalled. No functional
regression was observed across repeated runs of the nk_qlease.py
HW selftest, which exercises the lease teardown path; this was
tested against fbnic QEMU emulation. |
