| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix memory leak of bonding resources
In a corner case of concurrent driver removal and driver reset,
bonding resource is first released in hns_roce_hw_v2_exit() during
driver removal, and then is allocated again in hns_roce_register_device()
during driver reset. This leads to memory leak because the release
timing has already passed. This may also lead to a kernel panic
as below because of the leaked notifier callback:
Call trace:
0xffffa20fccc04978 (P)
raw_notifier_call_chain+0x20/0x38
call_netdevice_notifiers_info+0x60/0xb8
netdev_lower_state_changed+0x4c/0xb8
As Sashiko suggested, the teardown order of bonding resources should
be inverted to make sure the resources are released when the driver
is removed. |
| filebrowser through 2.63.23 fails to validate named pipes in directory archive and public download handlers, allowing attackers to trigger blocking open syscalls. Authenticated users or anonymous visitors with public share links can repeatedly request archives containing named pipes to pin server goroutines and exhaust connection resources. |
| Adobe Commerce versions 2.4.9-beta1, 2.4.8-p4, 2.4.7-p9, 2.4.6-p14, 2.4.5-p16, 2.4.4-p17 and earlier are affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| Uncontrolled resource consumption in `check.jst` in RDK-B WebUI `rdkb-2025q4-kirkstone.04.10.26` allows a remote unauthenticated attacker to cause denial of service via excessively large password values. |
| vLLM before 0.27.0 fails to properly classify DeepStream as a GPU backend and omits pixel-limit enforcement in its decode path. Unauthenticated attackers can activate DeepStream at request time to initialize the process-wide GPU decode pool and submit video that bypasses resource controls, causing partial denial of service for concurrent requests. |
| A vulnerability was identified in bytebot-ai bytebot 0.0.1. The affected element is an unknown function of the component Agent Execution Workflow. Such manipulation leads to infinite loop. The attack may be performed from remote. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| Wings is the server control plane for the Pterodactyl game-server management panel. In versions up to and including 1.13.2, the SFTP write path does not enforce a server's disk quota during a transfer, allowing a tenant with SFTP write access to a single server to exhaust the host node's physical disk and take down every server on it. Wings checks available space only once, as a boolean, when the write handle is opened, using a stale cached usage value and without knowing the size of the incoming data, and it then returns a raw, unaccounted file handle that is never re-checked as the transfer proceeds. A single upload can therefore be written without bound, far beyond the configured disk limit, until the node's disk is full, and because a server stopped for exceeding its limit is not treated as suspended, SFTP writes are still accepted even after the quota is already exceeded. This issue is fixed in version 1.13.3. |
| ORAS (OCI Registry As Storage) is a CLI and library for managing artifacts in OCI registries. In ORAS CLI versions up to and including 1.3.2, the recursive referrer traversal does not track visited descriptors, so a malicious OCI registry that returns a cyclic referrer graph causes unbounded recursion and memory growth. This affects oras discover, whose recursive traversal is enabled by default because the --depth option defaults to 0 (unlimited), as well as the recursive referrer counting used by the oras backup and oras restore workflows. A cyclic graph can be as simple as A referring to B and B referring back to A. A malicious registry can use this to cause a client-side denial of service, exhausting CPU and memory and hanging automation or CI/CD pipelines that run ORAS against untrusted registry metadata. The vulnerability does not extend to code execution, artifact substitution, or integrity bypass. This issue has been fixed in version 1.3.3. |
| Improper input validation in `ajaxSet_wireless_network_configuration.jst` in RDK-B WebUI `rdkb-2025q4-kirkstone.04.10.26` allows an authenticated attacker to cause denial of service via a crafted `ssid_number` parameter. |
| iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, the Avro array and map decoders looped over an attacker-controlled block-count value without checking the underlying reader's error state inside the loop body. Reader.ReadBlockHeader returns the count as a Go int, which is 64-bit on amd64 / arm64 targets — so a producer can declare a block of up to math.MaxInt64 (~9.2 × 10¹⁸) elements followed by EOF (or any truncated payload), and the decoder will attempt that many no-op iterations before propagating the error. The realistic ceiling is "indefinite until the worker is killed externally" — a single hostile payload pins a CPU core until the process is OOM-killed, deadline-cancelled, or terminated. Remote, unauthenticated denial-of-service. This vulnerability is fixed in 2.33.0. |
| urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0. |
| In Eclipse Jetty, versions 12.0.0-12.0.31 and 12.1.0-12.0.5, class GzipHandler exposes a vulnerability when a compressed HTTP request, with Content-Encoding: gzip, is processed and the corresponding response is not compressed.
This happens because the JDK Inflater is allocated for decompressing the request, but it is not released because the release mechanism is tied to the compressed response.
In this case, since the response is not compressed, the release mechanism does not trigger, causing the leak. |
| Uncontrolled Resource Consumption vulnerability in Apache Tomcat via an allocation leak in the HTTP/2 backlog tracking when a stream is reset
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.39 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.59 through 8.5.100. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Free all memory if cp_init() fails
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: reclaim forward-allocated memory on RX path errors
After commit 9db5b3cec4ec ("mptcp: borrow forward memory from subflow"),
errors in the receive path prior to queueing skbs into the receive
queue do not trigger forward-allocated memory reclaiming.
Prevent forward memory from growing unboundedly in pathological drop
scenarios by explicitly reclaiming memory when skbs are dropped. |
| Uncontrolled Resource Consumption vulnerability in Apache InLong. Users could affect operational configuration or allow upload of non-official packages.
This issue affects Apache InLong: from 2.0.0 before 2.4.0.
Users are advised to upgrade to Apache InLong's 2.4.0 or cherry-pick [1] to solve it.
[1]
https://github.com/apache/inlong/pull/12095 https://github.com/apache/inlong/pull/11732 |
| Uncontrolled Resource Consumption vulnerability in Apache InLong. Non-template responsible persons can view template information.
This issue affects Apache InLong: from 2.0.0 before 2.4.0.
Users are advised to upgrade to Apache InLong's 2.4.0 or cherry-pick [1] to solve it.
[1]
https://github.com/apache/inlong/pull/12093 https://github.com/apache/inlong/pull/11732 |
| LeafWiki extracts an uploaded ZIP archive without limiting how much data it will write. ZipExtractor.ExtractToDir in internal/importer/zip_extractor.go opens each entry and copies it to the destination with io.Copy, which runs to the end of the decompressed stream, so only the size of the uploaded archive is bounded and the size it expands to is not. The import route that reaches this code requires the Editor or Admin role, and the upload itself is capped at 500 MiB compressed. Because a ZIP entry can compress at a very high ratio, an archive well inside that cap can expand to hundreds of gigabytes as it is written out. The extraction directory defaults to a location under the operating system temporary directory, so the written data consumes the disk backing that path, which on a tmpfs-backed temporary directory is memory. A user holding the Editor role can therefore exhaust the storage the service depends on and keep it from serving, using far more resource than the upload limit alone would permit. |
| Ech0 before 5.0.1 does not impose any size or shape limit on the Accept-Language header processed by its i18n middleware, which runs on every HTTP request. The header is passed unfiltered to go-i18n's NewLocalizer, which internally calls golang.org/x/text/language.ParseAcceptLanguage. The CVE-2022-32149 mitigation in x/text caps '-' characters but not '_' characters, which the parser aliases to '-', allowing quadratic-time parsing to be triggered with a large header (up to Go's default 1 MiB) built from underscore separators. An unauthenticated attacker can send such requests to consume roughly 1.5 seconds of CPU each, and concurrent requests can saturate a multi-core server (denial of service). |
| linkify-it is a links recognition library with full Unicode support. Prior to 5.0.2, the mailto: schema validator used by .test() and .match() can be invoked at every mailto: occurrence and scan the remaining input through src_email_name in lib/re.mjs, causing O(n^2) CPU consumption on crafted user text. This issue is fixed in version 5.0.2. |
