| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A malicious user can get read-access to files in the flatpak-system-helper context if a system OCI repository is configured, because the OCI code paths in the system helper follow symlinks when importing OCI images that are under the user's control. |
| Without NO_SESSION_CACHE_REF, wolfSSL_get_session() does not return a session object but a ClientSession reference of the form {row, index, hash(sessionID)} into the process-global SessionCache, and ClientSessionToSession() validates it against that hash alone. Because the TLS 1.2 session ID is chosen by the server and sent in clear, AddSessionToCache() matches any other server's session on the same ID and overwrites the client-side entry with that server's master secret, cipher suite and version, while the handle continues to resolve; nothing on the write path compares the peer, the application's server ID or the WOLFSSL_CTX. Resuming through the handle then produces an abbreviated handshake in which no Certificate message is sent, so neither chain verification nor wolfSSL_check_domain_name() runs, and the attacker is accepted as the original server for the whole of that connection. Affected builds are those leaving NO_SESSION_CACHE_REF, NO_SESSION_CACHE, NO_CLIENT_CACHE and TITAN_SESSION_CACHE all undefined, which includes a plain ./configure, --enable-opensslextra and --enable-opensslall; fifteen integration options define NO_SESSION_CACHE_REF and are therefore not affected, among them --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-wpas and the rest of the OPENSSL_COMPATIBLE_DEFAULTS family, and --enable-leanpsk, --enable-leantls, --enable-lowresource and --enable-tinytls13 disable the cache outright. The application must use the legacy reference flow, wolfSSL_get_session() or SSL_get_session() followed by wolfSSL_set_session(); wolfSSL_get1_session() returns the session object itself and is not affected, nor are wolfSSL_SetServerID() lookups. Only TLS 1.2 and below and DTLS 1.2 and below are reachable, since TLS 1.3 and ticket resumption with an empty ServerHello session ID both use a client-chosen cache key. The poisoned entry lives in the process-global cache, so it crosses WOLFSSL_CTX boundaries and persists until the entry is evicted or the session times out, 500 seconds by default. Releases v5.3.0 through v5.9.2 are affected; the fix adds a per-write generation counter to the cache and raises WOLFSSL_CACHE_VERSION from 2 to 3, so a cache persisted by an older build is rejected by a fixed one. |
| Under WOLFSSL_SMALL_CERT_VERIFY, ProcessPeerCertParse() runs the certificate signature check separately from the parse to keep peak memory down, then merges the two results, but it merged the signature result back only when the parse returned 0, so any parse error hid it. ParseCertRelative() reaches its validity-date, name-constraint and critical-extension checks only after ConfirmSignature() has passed, so splitting the signature check out inverts the precedence that makes "override date errors" a sound policy, and ASN_SIG_CONFIRM_E is never surfaced anywhere. The attacker needs no key material from the real PKI and no CA compromise: a self-made certificate carrying the expected subject name, the trusted CA's subject as its issuer, arbitrary bytes where the signature goes, a validity window in the past and the attacker's own key pair is sufficient. Affected builds define WOLFSSL_SMALL_CERT_VERIFY, which is off by default, is not set implicitly by any platform or preset header, and is not reachable from any CMake option; the autotools routes are --enable-lowresource, --enable-leantls, --enable-tinytls13=cert and --enable-tinytls13=mutualauth, and examples/configs/user_settings_embedded.h reaches it through WC_CFG_SMALL_CERT_VERIFY, which ships as 0, while neither --enable-all nor --enable-distro enables it at all. The application must additionally install a verify callback through wolfSSL_CTX_set_verify() or wolfSSL_set_verify() with WOLFSSL_VERIFY_PEER that returns 1 for ASN_BEFORE_DATE_E or ASN_AFTER_DATE_E; wolfSSL ships this exact shape as myVerify() in wolfssl/test.h under VERIFY_OVERRIDE_DATE_ERR, which examples/client -D selects. An application with no callback, or whose callback returns preverify for date errors, still fails the handshake, and wolfSSL_CertManagerVerifyBuffer() and wc_CheckCertSignature() report ASN_SIG_CONFIRM_E correctly in the same binary. TLS 1.2 and TLS 1.3 are affected in both directions, and DTLS reaches the same function; where the forged certificate is a chain certificate the callback's consent causes it to be cached in the WOLFSSL_CTX certificate manager, so an exposed deployment must restart the context or the process rather than merely reconnect. |
| A (D)TLS 1.2 client can accept a ChangeCipherSpec message before it has sent its ClientKeyExchange. No master secret has been derived at that point, so the client installs read keys derived from a known (deterministic) key and checks the server's Finished against that same key. An out-of-order ChangeCipherSpec can therefore be used by an attacker to complete the handshake in place of the server and send data the client accepts as authentic. The client's own traffic still uses correctly derived keys, so the attacker cannot read it, and the genuine server never completes the handshake. DTLS 1.2 clients are exposed because a datagram read can deliver the out-of-order records on its own. TLS 1.2 clients are exposed when the application supplies received bytes with wolfSSL_inject() or enables read ahead. For certificate suites, the attacker must be in a man-in-the-middle position. For PSK (Pre Shared Key) connections, any fake server can succeed without knowing the PSK. |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
| When using RPK (Raw Public Key), the client side of a TLS 1.2, 1.3 and DTLS 1.2 connection could accept an unsolicited server_cert_type=RawPublicKey which allowed a malicious or misbehaving server to bypass authentication. RPK is off by default and only enabled in --enable-rpk OR --enable-all OR --enable-distro AKA HAVE_RPK builds. |
| A failed X509_verify_cert call permanently plants an unverified attacker CA in the shared CertManager, bypassing certificate validation in every type-blind sibling consumer (native TLS, OCSP, CRL, direct CM verify). This affects version 5.8.4 through 5.9.2 of wolfSSL with the macros (OPENSSL_EXTRA && !NO_CERTS && !WOLFCRYPT_ONLY) defined or built with --enable-opensslextra and the application is specifically making calls to the X509_verify_cert function. |
| A certificate with no dNSName SAN but another SAN type present (e.g. registeredID or iPAddress) bypassed the Subject CN dNSName name-constraint check. The CN-as-DNS fallback was gated on cert->subjectCN != NULL && cert->altNames == NULL && !cert->isCA instead of "no dNSName SAN", so an out-of-scope CN was accepted. This incomplete fix from CVE-2026-6731, leading to the name-constraint check issue, was introduced in wolfSSL version 5.9.2. |
| wolfSSL versions 5.9.2 and earlier contain a flaw in the X.509 certificate validation logic where it fails to properly enforce NameConstraints extensions when there is an unconstrained CA tier between a name-constrained intermediate CA and the leaf certificate. wolfSSL incorrectly accepted certificates for hostnames they shouldn't be allowed to cover, due to a chain-walking state-machine bug that resets the validation state when encountering an intermediate without NameConstraints, thereby bypassing cryptographic delegation controls. This defect exists in the default build configuration that makes use of certificates where name constraint extensions are used. Thanks to Jack Lloyd, PathDiff, and Ben Smyth for reporting the issue. |
| In wolfSSL versions 5.7.2 through 5.9.2 there is a client-side implementation flaw in RFC 6961, multiple OCSP response stapling, which can lead to certificate forgery. When a wolfSSL client enables OCSP stapling with the HAVE_CERTIFICATE_STATUS_REQUEST_V2 feature and calls wolfSSL_UseOCSPStaplingV2(ssl, WOLFSSL_CSR2_OCSP_MULTI, options), the client accepts any certificate in the peer's chain as a certificate authority without verifying that the certificate is actually authorized to act as one. This means that an attacker who possesses any certificate that chains to a CA trusted by the client (along with its private key) can forge certificates for arbitrary identities that will be accepted as valid by the client. The end entity certificate of the server is stored in the persistent trust store, affecting subsequent connections that reuse the context even when OCSP multi usage is not employed. Found by internal wolfSSL testing. |
| Predictable exact value from previous values vulnerability in Citrix NetScaler ADC and Citrix NetScaler Gateway.
This issue affects ADC: before 14.1-73.37, before 13.1-64.23, before 14.1-73.37 FIPS, and before 13.1.37.279 FIPS and NDcPP; Gateway: before 14.1-73.37 and before 13.1-64.23. |
| Memory overflow vulnerability vulnerability in Citrix NetScaler ADC and Citrix NetScaler Gateway.
This issue affects ADC: before 14.1-73.37, before 13.1-64.23, before 14.1-73.37 FIPS, and before 13.1.37.279 FIPS and NDcPP; Gateway: before 14.1-73.37 and before 13.1-64.23 leading to unpredictable or erroneous behavior or Denial of Service |
| A flaw was found in kube-compare. When processing a 'container://' reference path, the tool incorrectly executes an untrusted container image's entrypoint instead of merely extracting data from a stopped container. This allows a remote attacker to achieve arbitrary code execution on the operator's workstation. If the Docker daemon requires elevated privileges, the untrusted code may execute with root-mediated daemon privileges, posing a significant security risk. |
| An authorization issue was addressed with improved state management. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to access sensitive user data. |
| A Code Injection vulnerability affecting GEOVIA Geospatial Data Manager from Release 3DEXPERIENCE R2024x through Release 3DEXPERIENCE R2026x could allow an attacker to execute arbitrary code on the server. |
| Nicotine+ is a graphical client for the Soulseek peer-to-peer network. Prior to version 3.3.11, a modified remote client can send zlib-compressed peer messages containing a decompression bomb, exhausting available memory of the recipient's operating system. This issue has been patched in version 3.3.11. |
| compress provides various compression algorithms. Prior to version 1.18.7, a signed integer overflow vulnerability in s2.NewDict() allows an attacker to bypass repeat index validation by supplying a dictionary with a uvarint-encoded repeat value exceeding MaxInt64. When Dict.Encode() is subsequently called, the overflowed negative repeat value causes an out-of-bounds memory access via unsafe.Pointer arithmetic, crashing the process with SIGSEGV. This issue has been patched in version 1.18.7. |
| The rancher-extension-stackstate extension in SUSE Observability exposes service tokens in plain configuration or insecure locations rather than managing them securely. An attacker with minimal access could obtain the token to gain unauthorized access or escalate privileges within the observability environment. |
| A potential security vulnerability has been identified in the HP Support Assistant for versions prior to 9.55.10.0. The vulnerability could potentially allow a local attacker to escalate privileges due to insufficient access controls. |
| libexpat versions 2.7.2 through 2.8.5 contain an integer overflow vulnerability in expat_realloc() function on 32-bit platforms when computing allocation sizes. Attackers supplying malicious XML to applications parsing with vulnerable libexpat can cause heap buffer overflow, memory corruption, or denial of service. |
