| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in SmartClient modules Opcenter QL Home (SC) (All versions >= V13.2 < V2506), SOA Audit (All versions >= V13.2 < V2506), SOA Cockpit (All versions >= V13.2 < V2506). The affected application improperly handles error while accessing an inaccessible resource leading to exposing the system applications. |
| In the Linux kernel, the following vulnerability has been resolved:
ath11k: fix the warning of dev_wake in mhi_pm_disable_transition()
When test device recovery with below command, it has warning in message
as below.
echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash
echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash
warning message:
[ 1965.642121] ath11k_pci 0000:06:00.0: simulating firmware assert crash
[ 1968.471364] ieee80211 phy0: Hardware restart was requested
[ 1968.511305] ------------[ cut here ]------------
[ 1968.511368] WARNING: CPU: 3 PID: 1546 at drivers/bus/mhi/core/pm.c:505 mhi_pm_disable_transition+0xb37/0xda0 [mhi]
[ 1968.511443] Modules linked in: ath11k_pci ath11k mac80211 libarc4 cfg80211 qmi_helpers qrtr_mhi mhi qrtr nvme nvme_core
[ 1968.511563] CPU: 3 PID: 1546 Comm: kworker/u17:0 Kdump: loaded Tainted: G W 5.17.0-rc3-wt-ath+ #579
[ 1968.511629] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[ 1968.511704] Workqueue: mhi_hiprio_wq mhi_pm_st_worker [mhi]
[ 1968.511787] RIP: 0010:mhi_pm_disable_transition+0xb37/0xda0 [mhi]
[ 1968.511870] Code: a9 fe ff ff 4c 89 ff 44 89 04 24 e8 03 46 f6 e5 44 8b 04 24 41 83 f8 01 0f 84 21 fe ff ff e9 4c fd ff ff 0f 0b e9 af f8 ff ff <0f> 0b e9 5c f8 ff ff 48 89 df e8 da 9e ee e3 e9 12 fd ff ff 4c 89
[ 1968.511923] RSP: 0018:ffffc900024efbf0 EFLAGS: 00010286
[ 1968.511969] RAX: 00000000ffffffff RBX: ffff88811d241250 RCX: ffffffffc0176922
[ 1968.512014] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff888118a90a24
[ 1968.512059] RBP: ffff888118a90800 R08: 0000000000000000 R09: ffff888118a90a27
[ 1968.512102] R10: ffffed1023152144 R11: 0000000000000001 R12: ffff888118a908ac
[ 1968.512229] R13: ffff888118a90928 R14: dffffc0000000000 R15: ffff888118a90a24
[ 1968.512310] FS: 0000000000000000(0000) GS:ffff888234200000(0000) knlGS:0000000000000000
[ 1968.512405] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1968.512493] CR2: 00007f5538f443a8 CR3: 000000016dc28001 CR4: 00000000003706e0
[ 1968.512587] Call Trace:
[ 1968.512672] <TASK>
[ 1968.512751] ? _raw_spin_unlock_irq+0x1f/0x40
[ 1968.512859] mhi_pm_st_worker+0x3ac/0x790 [mhi]
[ 1968.512959] ? mhi_pm_mission_mode_transition.isra.0+0x7d0/0x7d0 [mhi]
[ 1968.513063] process_one_work+0x86a/0x1400
[ 1968.513184] ? pwq_dec_nr_in_flight+0x230/0x230
[ 1968.513312] ? move_linked_works+0x125/0x290
[ 1968.513416] worker_thread+0x6db/0xf60
[ 1968.513536] ? process_one_work+0x1400/0x1400
[ 1968.513627] kthread+0x241/0x2d0
[ 1968.513733] ? kthread_complete_and_exit+0x20/0x20
[ 1968.513821] ret_from_fork+0x22/0x30
[ 1968.513924] </TASK>
Reason is mhi_deassert_dev_wake() from mhi_device_put() is called
but mhi_assert_dev_wake() from __mhi_device_get_sync() is not called
in progress of recovery. Commit 8e0559921f9a ("bus: mhi: core:
Skip device wake in error or shutdown state") add check for the
pm_state of mhi in __mhi_device_get_sync(), and the pm_state is not
the normal state untill recovery is completed, so it leads the
dev_wake is not 0 and above warning print in mhi_pm_disable_transition()
while checking mhi_cntrl->dev_wake.
Add check in ath11k_pci_write32()/ath11k_pci_read32() to skip call
mhi_device_put() if mhi_device_get_sync() does not really do wake,
then the warning gone.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 |
| Permission verification bypass vulnerability in the Camera app. Successful exploitation of this vulnerability may affect service confidentiality. |
| Absolute path disclosure vulnerability in DM Corporative CMS. This vulnerability allows an attacker to view the contents of webroot/file, if navigating to a non-existent file. |
| A remote code execution vulnerability exists in the Rockwell Automation ThinManager® ThinServer™ that allows a threat actor to execute arbitrary code with System privileges. This vulnerability exists due to the lack of proper data input validation, which allows files to be overwritten. |
| Mattermost versions 10.5.x <= 10.5.10, 10.11.x <= 10.11.2 fail to use constant-time comparison for sensitive string comparisons which allows attackers to exploit timing oracles to perform byte-by-byte brute force attacks via response time analysis on Cloud API keys and OAuth client secrets |
| Information disclosure may occur while processing the hypervisor log. |
| Frappe Learning is a learning system that helps users structure their content. In versions prior to 2.38.0, the system did stored the attachments uploaded by the students in their assignments as public files. This issue potentially exposed student-uploaded files to the public. Anyone with the file URL could access these files without authentication. The issue has been fixed in version 2.38.0 by ensuring all student-uploaded assignment attachments are stored as private files by default. |
| Identity authentication bypass vulnerability in the Gallery app. Successful exploitation of this vulnerability may affect service confidentiality. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: avoid kernel warning when changing RX ring parameters
Calling ethtool changing the RX ring parameters like this:
$ ethtool -G eth0 rx 1024
on igc triggers kernel warnings like this:
[ 225.198467] ------------[ cut here ]------------
[ 225.198473] Missing unregister, handled but fix driver
[ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168
xdp_rxq_info_reg+0x79/0xd0
[...]
[ 225.198601] Call Trace:
[ 225.198604] <TASK>
[ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc]
[ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc]
[ 225.198626] ethnl_set_rings+0x18a/0x250
[ 225.198631] genl_family_rcv_msg_doit+0xca/0x110
[ 225.198637] genl_rcv_msg+0xce/0x1c0
[ 225.198640] ? rings_prepare_data+0x60/0x60
[ 225.198644] ? genl_get_cmd+0xd0/0xd0
[ 225.198647] netlink_rcv_skb+0x4e/0xf0
[ 225.198652] genl_rcv+0x24/0x40
[ 225.198655] netlink_unicast+0x20e/0x330
[ 225.198659] netlink_sendmsg+0x23f/0x480
[ 225.198663] sock_sendmsg+0x5b/0x60
[ 225.198667] __sys_sendto+0xf0/0x160
[ 225.198671] ? handle_mm_fault+0xb2/0x280
[ 225.198676] ? do_user_addr_fault+0x1eb/0x690
[ 225.198680] __x64_sys_sendto+0x20/0x30
[ 225.198683] do_syscall_64+0x38/0x90
[ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 225.198693] RIP: 0033:0x7f7ae38ac3aa
igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to
reset the xdp_rxq_info member before calling igc_setup_rx_resources().
This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info.
Make sure to unregister the xdp_rxq_info structure first in
igc_setup_rx_resources. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix rq-qos breakage from skipping rq_qos_done_bio()
a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't
tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set.
While this fixed a potential oops, it also broke blk-iocost by skipping the
done_bio callback for merged bios.
Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(),
rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED
distinguishing the former from the latter. rq_qos_done_bio() is not called
for bios which wenth through rq_qos_merge(). This royally confuses
blk-iocost as the merged bios never finish and are considered perpetually
in-flight.
One reliably reproducible failure mode is an intermediate cgroup geting
stuck active preventing its children from being activated due to the
leaf-only rule, leading to loss of control. The following is from
resctl-bench protection scenario which emulates isolating a web server like
workload from a memory bomb run on an iocost configuration which should
yield a reasonable level of protection.
# cat /sys/block/nvme2n1/device/model
Samsung SSD 970 PRO 512GB
# cat /sys/fs/cgroup/io.cost.model
259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025
# cat /sys/fs/cgroup/io.cost.qos
259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00
# resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1
...
Memory Hog Summary
==================
IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m
W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m
Isolation and Request Latency Impact Distributions:
min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev
isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82
lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6
Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96%
The isolation result of 58.12% is close to what this device would show
without any IO control.
Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and
calling rq_qos_done_bio() on them too. For consistency and clarity, rename
BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into
rq_qos_done_bio() so that it's next to the code paths that set the flags.
With the patch applied, the above same benchmark shows:
# resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1
...
Memory Hog Summary
==================
IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m
W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m
Isolation and Request Latency Impact Distributions:
min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev
isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81
lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68
Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0% |
| A vulnerability, which was classified as problematic, has been found in 1902756969 reggie 1.0. Affected by this issue is some unknown functionality of the file /user/sendMsg of the component Phone Number Validation Handler. The manipulation of the argument code leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was detected in Das Parking Management System 停车场管理系统 6.2.0. This impacts an unknown function of the file /Operator/Search. The manipulation results in information disclosure. The attack may be performed from remote. The exploit is now public and may be used. |
| A flaw has been found in Das Parking Management System 停车场管理系统 6.2.0. Affected is an unknown function of the file /Operator/FindAll. This manipulation causes information disclosure. It is possible to initiate the attack remotely. The exploit has been published and may be used. |
| Cursor is a code editor built for programming with AI. In versions 1.6 and below, Mermaid (a to render diagrams) allows embedding images which then get rendered by Cursor in the chat box. An attacker can use this to exfiltrate sensitive information to a third-party attacker controlled server through an image fetch after successfully performing a prompt injection. A malicious model (or hallucination/backdoor) might also trigger this exploit at will. This issue requires prompt injection from malicious data (web, image upload, source code) in order to exploit. In that case, it can send sensitive information to an attacker-controlled external server. Some additional bypasses not covered in the initial fix to this issue were discovered, see GHSA-43wj-mwcc-x93p. This issue is fixed in version 1.7. |
| In Varnish Cache 7.0.0, 7.0.1, 7.0.2, and 7.1.0, it is possible to cause the Varnish Server to assert and automatically restart through forged HTTP/1 backend responses. An attack uses a crafted reason phrase of the backend response status line. This is fixed in 7.0.3 and 7.1.1. |
| IBM InfoSphere Information Server 11.7 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in a stack trace. This information could be used in further attacks against the system. IBM X-Force ID: 231202. |
| In onCreate of NotificationAccessConfirmationActivity.java, there is a possible way to trick the victim to grant notification access to the wrong app due to improper input validation. This could lead to local information disclosure with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12LAndroid ID: A-228178437 |
| TS3 Manager is modern web interface for maintaining Teamspeak3 servers. A Denial of Dervice vulnerability has been identified in versions 2.2.1 and earlier. The vulnerability permits an unauthenticated actor to crash the application through the submission of specially crafted Unicode input, requiring no prior authentication or privileges. The flaw manifests when Unicode tag characters are submitted to the Server field on the login page. The application fails to properly handle these characters during the ASCII conversion process, resulting in an unhandled exception that terminates the application within four to five seconds of submission. This issue is fixed in version 2.2.2. |
| TS3 Manager is modern web interface for maintaining Teamspeak3 servers. A reflected cross-site scripting vulnerability has been identified in versions 2.2.1 and earlier. The vulnerability exists in the error handling mechanism of the login page, where malicious scripts embedded in server hostnames are executed in the victim's browser context without proper sanitization. This issue is fixed in version 2.2.2. |
