| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sti: use managed regmap_field allocations
The regmap_field objects allocated at player init are never freed and
may leak resources if the driver is removed.
Switch to devm_regmap_field_alloc() to automatically limit the lifetime
of the allocations the lifetime of the device. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hamradio: 6pack: fix uninit-value in sixpack_receive_buf
sixpack_receive_buf() does not properly skip bytes with TTY error flags.
The while loop iterates through the flags buffer but never advances the
data pointer (cp), and passes the original count (including error bytes)
to sixpack_decode(). This causes sixpack_decode() to process bytes that
should have been skipped due to TTY errors. The TTY layer does not
guarantee that cp[i] holds a meaningful value when fp[i] is set, so
passing those positions to sixpack_decode() results in KMSAN reporting
an uninit-value read.
Fix this by processing bytes one at a time, advancing cp on each
iteration, and only passing valid (non-error) bytes to sixpack_decode().
This matches the pattern used by slip_receive_buf() and
mkiss_receive_buf() for the same purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: netem: fix queue limit check to include reordered packets
The queue limit check in netem_enqueue() uses q->t_len which only
counts packets in the internal tfifo. Packets placed in sch->q by
the reorder path (__qdisc_enqueue_head) are not counted, allowing
the total queue occupancy to exceed sch->limit under reordering.
Include sch->q.qlen in the limit check. |
| Use after free in Payments in Google Chrome on Android prior to 149.0.7827.201 allowed a local attacker to potentially exploit heap corruption via physical access to the device. (Chromium security severity: High) |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm allows a transitive dependency alias from registry package metadata to contain path traversal segments. During install, pnpm later uses that alias as a filesystem path when linking dependency nodes. As a result, a registry package can cause `pnpm install --ignore-scripts` to replace paths in the current project with symlinks to attacker-controlled dependency package directories. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm passes the lockfile-controlled git resolution.commit value to git fetch without a -- separator or commit-format validation. For git dependencies fetched through the shallow-fetch path, a malicious lockfile can replace the expected 40-character commit hash with a Git option such as --upload-pack=<command>. For SSH and local transports, --upload-pack can execute the supplied command. HTTPS transports ignore --upload-pack, so the practical attack surface is primarily SSH or local git dependencies. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, `pnpm install` in non-frozen mode can accept new remote package content after detecting that the downloaded tarball does not match the integrity recorded in pnpm-lock.yaml. When a package is already locked with an integrity value, and the registry later serves different metadata and tarball content for the same package name and version, pnpm initially reports an integrity mismatch. However, plain pnpm install then performs a resolution repair, accepts the registry's new integrity, updates the lockfile, installs the new content, and exits successfully. This means the lockfile integrity check does not act as a hard stop by default. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm's tarball extraction worker skips integrity verification when the integrity field is absent from the lockfile resolution. If an attacker can both modify pnpm-lock.yaml to remove the integrity: field and cause the referenced registry URL to serve altered package content, pnpm install --frozen-lockfile can install the altered package without an integrity error. npm's npm ci enforces integrity by default; pnpm's behavior of silently skipping verification is a pnpm-specific fail-open gap. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, pnpm can persist package-manager bootstrap metadata in the first YAML document of pnpm-lock.yaml. Before the patch, direct pnpm execution trusted an already resolved packageManagerDependencies entry when the committed env lockfile contained matching pnpm and @pnpm/exe versions. A malicious repository could therefore commit package-manager lockfile package records and snapshots that bypassed fresh package-manager resolution, then cause pnpm to install and execute bytes selected by that committed lockfile state during automatic version switching. This vulnerability is fixed in 10.34.2 and 11.5.3. |
| Vim is an open source, command line text editor. Prior to 9.2.0699, Vim's Python omni-completion (runtime/autoload/python3complete.vim and the legacy pythoncomplete.vim) executes reconstructed function and class definitions from the current buffer with exec() as part of populating the completion dictionary. When reconstructing that source, each scope's docstring is inserted verbatim between triple quotes with no escaping, so a hostile buffer can break out of the triple-quoted literal and execute attacker-controlled Python during omni-completion. This vulnerability is fixed in 9.2.0699. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: avoid leaking percpu counter pointers
The native and compat get-entries paths copy the fixed rule entry header
from the kernelized rule blob to userspace before overwriting the entry's
counter fields with a sanitized counter snapshot.
On SMP kernels, entry->counters.pcnt contains the percpu allocation
address used by x_tables rule counters. A caller can provide a userspace
buffer that faults during the initial fixed-header copy after pcnt has
been copied but before the later sanitized counter copy runs. The syscall
then returns -EFAULT while leaving the raw percpu pointer in userspace.
Copy only the fixed entry prefix before counters from the kernelized rule
blob, then copy the sanitized counter snapshot into the counter field.
Apply this ordering to the IPv4, IPv6, and ARP native and compat
get-entries implementations so a fault cannot expose the internal percpu
counter pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS
A logic flaw in __smc_setsockopt() allows a local unprivileged user to
cause a Denial of Service (DoS) by holding the socket lock indefinitely.
The function __smc_setsockopt() calls copy_from_sockptr() while holding
lock_sock(sk). By passing a userfaultfd-monitored memory page (or
FUSE-backed memory on systems where unprivileged userfaultfd is disabled)
as the optval, an attacker can halt execution during the copy operation,
keeping the lock held.
Combined with asynchronous tear-down operations like shutdown(), this
exhausts the kernel wq (kworkers) and triggers the hung task watchdog.
[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.
[ 240.123489] Call Trace:
[ 240.123501] smc_shutdown+...
[ 240.123512] lock_sock_nested+...
This patch moves the user-space copy outside the lock_sock() critical
section to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
efi/capsule-loader: fix incorrect sizeof in phys array reallocation
The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses
sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be
causing an undersized allocation.
The allocation is also inconsistent with the initial array allocation in
efi_capsule_open() that allocates one entry with sizeof(phys_addr_t),
and the efi_capsule_write() function that stores phys_addr_t values (not
pointers) via page_to_phys().
On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this
goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but
pointers are 32-bit, this allocates half the required space, which might
lead to a heap buffer overflow when storing physical addresses.
This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader:
fix incorrect allocation size") which fixed the same issue at the initial
allocation site. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: prevent NULL pointer dereference during unmount
When flushing out outstanding glock work during an unmount, gfs2_log_flush()
can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc
is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in
gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it
missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: pci: fix possible use-after-free caused by unfinished irq_prepare_bcn_tasklet
The irq_prepare_bcn_tasklet is initialized in rtl_pci_init() and
scheduled when RTL_IMR_BCNINT interrupt is triggered by hardware.
But it is never killed in rtl_pci_deinit(). When the rtlwifi card
probe fails or is being detached, the ieee80211_hw is deallocated.
However, irq_prepare_bcn_tasklet may still be running or pending,
leading to use-after-free when the freed ieee80211_hw is accessed
in _rtl_pci_prepare_bcn_tasklet().
Similar to irq_tasklet, add tasklet_kill() in rtl_pci_deinit() to
ensure that irq_prepare_bcn_tasklet is properly terminated before
the ieee80211_hw is released.
The issue was identified through static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Clamp XDomain response data copy to allocation size
tb_xdp_properties_request() derives the per-packet copy length from
the response header without checking that it fits in the previously
allocated data buffer. A malicious peer can set its length field
larger than the declared data_length, causing memcpy to write past
the kcalloc allocation.
Clamp the per-packet copy length so that the cumulative offset
never exceeds data_len. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Replace old pointer to new idr
Commit 5e28b7b94408 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
[1]
!RB_EMPTY_ROOT(&prime_fpriv->dmabufs)
WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833
Call Trace:
drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438 |
