| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
e1000/e1000e: Fix leak in DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented after a successful mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping would leak.
In these commits, a faulty while condition caused an infinite loop in
dma_error:
Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e
driver")
Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver")
Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of
unsigned in *_tx_map()") fixed the infinite loop, but introduced the
off-by-one error.
This issue may still exist in the igbvf driver, but I did not address it
in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If bonding ARP/NS validation is enabled, an IPv6
NS/NA packet received on a slave can reach bond_validate_na(), which
calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can
crash in __ipv6_chk_addr_and_flags().
BUG: kernel NULL pointer dereference, address: 00000000000005d8
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170
Call Trace:
<IRQ>
ipv6_chk_addr+0x1f/0x30
bond_validate_na+0x12e/0x1d0 [bonding]
? __pfx_bond_handle_frame+0x10/0x10 [bonding]
bond_rcv_validate+0x1a0/0x450 [bonding]
bond_handle_frame+0x5e/0x290 [bonding]
? srso_alias_return_thunk+0x5/0xfbef5
__netif_receive_skb_core.constprop.0+0x3e8/0xe50
? srso_alias_return_thunk+0x5/0xfbef5
? update_cfs_rq_load_avg+0x1a/0x240
? srso_alias_return_thunk+0x5/0xfbef5
? __enqueue_entity+0x5e/0x240
__netif_receive_skb_one_core+0x39/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x30/0x200
? srso_alias_return_thunk+0x5/0xfbef5
net_rx_action+0x338/0x3b0
handle_softirqs+0xc9/0x2a0
do_softirq+0x42/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x62/0x70
__dev_queue_xmit+0x2d3/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? packet_parse_headers+0x10a/0x1a0
packet_sendmsg+0x10da/0x1700
? kick_pool+0x5f/0x140
? srso_alias_return_thunk+0x5/0xfbef5
? __queue_work+0x12d/0x4f0
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to
bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate()
and avoid the path to ipv6_chk_addr(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mana: Null service_wq on setup error to prevent double destroy
In mana_gd_setup() error path, set gc->service_wq to NULL after
destroy_workqueue() to match the cleanup in mana_gd_cleanup().
This prevents a use-after-free if the workqueue pointer is checked
after a failed setup. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Remove redundant css_put() in scx_cgroup_init()
The iterator css_for_each_descendant_pre() walks the cgroup hierarchy
under cgroup_lock(). It does not increment the reference counts on
yielded css structs.
According to the cgroup documentation, css_put() should only be used
to release a reference obtained via css_get() or css_tryget_online().
Since the iterator does not use either of these to acquire a reference,
calling css_put() in the error path of scx_cgroup_init() causes a
refcount underflow.
Remove the unbalanced css_put() to prevent a potential Use-After-Free
(UAF) vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: fix oneway spam detection
The spam detection logic in TreeRange was executed before the current
request was inserted into the tree. So the new request was not being
factored in the spam calculation. Fix this by moving the logic after
the new range has been inserted.
Also, the detection logic for ArrayRange was missing altogether which
meant large spamming transactions could get away without being detected.
Fix this by implementing an equivalent low_oneway_space() in ArrayRange.
Note that I looked into centralizing this logic in RangeAllocator but
iterating through 'state' and 'size' got a bit too complicated (for me)
and I abandoned this effort. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: avoid reading the written value in offsets array
When sending a transaction, its offsets array is first copied into the
target proc's vma, and then the values are read back from there. This is
normally fine because the vma is a read-only mapping, so the target
process cannot change the value under us.
However, if the target process somehow gains the ability to write to its
own vma, it could change the offset before it's read back, causing the
kernel to misinterpret what the sender meant. If the sender happens to
send a payload with a specific shape, this could in the worst case lead
to the receiver being able to privilege escalate into the sender.
The intent is that gaining the ability to change the read-only vma of
your own process should not be exploitable, so remove this TOCTOU read
even though it's unexploitable without another Binder bug. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: image: mdc800: kill download URB on timeout
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit 372c93131998 ("USB: yurex: fix control-URB timeout handling")
- commit b98d5000c505 ("media: rc: iguanair: handle timeouts") |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix atomic context locking issue
The ncm_set_alt function was holding a mutex to protect against races
with configfs, which invokes the might-sleep function inside an atomic
context.
Remove the struct net_device pointer from the f_ncm_opts structure to
eliminate the contention. The connection state is now managed by a new
boolean flag to preserve the use-after-free fix from
commit 6334b8e4553c ("usb: gadget: f_ncm: Fix UAF ncm object at re-bind
after usb ep transport error").
BUG: sleeping function called from invalid context
Call Trace:
dump_stack_lvl+0x83/0xc0
dump_stack+0x14/0x16
__might_resched+0x389/0x4c0
__might_sleep+0x8e/0x100
...
__mutex_lock+0x6f/0x1740
...
ncm_set_alt+0x209/0xa40
set_config+0x6b6/0xb40
composite_setup+0x734/0x2b40
... |
| In the Linux kernel, the following vulnerability has been resolved:
usb: legacy: ncm: Fix NPE in gncm_bind
Commit 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle
with bind/unbind") deferred the allocation of the net_device. This
change leads to a NULL pointer dereference in the legacy NCM driver as
it attempts to access the net_device before it's fully instantiated.
Store the provided qmult, host_addr, and dev_addr into the struct
ncm_opts->net_opts during gncm_bind(). These values will be properly
applied to the net_device when it is allocated and configured later in
the binding process by the NCM function driver. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050-core: fix pm_runtime error handling
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails. |
| math-codegen generates code from mathematical expressions. Prior to version 0.4.3, string literal content passed to cg.parse() is injected verbatim into a new Function() body without sanitization. This allows an attacker to execute arbitrary system commands when user-controlled input reaches the parser. Any application exposing a math evaluation endpoint where user input flows into cg.parse() is vulnerable to full RCE. This issue has been patched in version 0.4.3. |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.214, the Change Customer modal correctly hides out-of-scope customers through the mailbox-filtered search endpoint, but the backend conversation_change_customer action accepts any supplied customer_email. A low-privileged agent can forge a request and bind a visible conversation to a hidden customer in another mailbox. This issue has been patched in version 1.8.214. |
| PJSIP is a free and open source multimedia communication library written in C. Prior to version 2.17, on GnuTLS builds, the SIP TLS transport (sip_transport_tls) can accept connections with invalid or untrusted certificates even when the application explicitly enables certificate verification via verify_server = PJ_TRUE or verify_client = PJ_TRUE. This issue has been patched in version 2.17. |
| A security flaw has been discovered in OSGeo gdal up to 3.13.0dev-4. Impacted is the function GDnentries of the file frmts/hdf4/hdf-eos/GDapi.c. Performing a manipulation of the argument DataFieldName results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. Upgrading to version 3.13.0RC1 is recommended to address this issue. The patch is named 184f77dbcc74118c062c05e464c88161d3c37b9b. You should upgrade the affected component. |
| PraisonAI is a multi-agent teams system. From version 2.5.6 to before version 4.6.34, PraisonAI ships a legacy Flask API server with authentication disabled by default. When that server is used, any caller that can reach it can access /agents and trigger the configured agents.yaml workflow through /chat without providing a token. This issue has been patched in version 4.6.34. |
| SEPPmail Secure Email Gateway before version 15.0.4 insecurely deserializes untrusted data, which can be reached from the new GINA UI and may allow unauthenticated remote attackers to execute code via a crafted serialized object. |
| CROSS implementation contains reference and optimized implementations of the CROSS post-quantum signature algorithm. Prior to commit fc6b7e7, there is a buffer overflow in crypto_sign_open() caused by an underflow of the integer mlen. This issue has been patched via commit fc6b7e7. |
| n8n-MCP is an MCP server that provides AI assistants access to n8n node documentation, properties, and operations. In versions 2.47.4 through 2.47.13, the SDK embedder path (N8NDocumentationMCPServer constructor, getN8nApiClient(), and validateInstanceContext()), the synchronous URL validator in SSRFProtection.validateUrlSync() had no IPv6 checks. IPv4-mapped IPv6 addresses such as http://[::ffff:169.254.169.254] bypassed the cloud-metadata, localhost, and private-IP range checks. An attacker able to supply an n8nApiUrl value could cause the server to issue HTTP requests to cloud metadata endpoints, RFC1918 private networks, or localhost services. Response bodies are returned to the caller (non-blind SSRF), and the n8nApiKey is forwarded in the x-n8n-api-key header to the attacker-controlled target. Projects with deployments embedding n8n-mcp as an SDK using N8NDocumentationMCPServer or N8NMCPEngine with user-supplied InstanceContext are affected. The first-party HTTP server deployment was not primarily affected — it has a second async validator (validateWebhookUrl) that catches IPv6 addresses. This issue has been fixed in version 2.47.14. If users are unable to upgrade immediately as a workaround they can validate URLs before passing to the SDK, restrict egress at the network layer, and reject user-controlled n8nApiUrl values. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: fix potential UAF in hci_le_remote_conn_param_req_evt
hci_conn lookup and field access must be covered by hdev lock in
hci_le_remote_conn_param_req_evt, otherwise it's possible it is freed
concurrently.
Extend the hci_dev_lock critical section to cover all conn usage. |
