| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't inherit MNT_UMOUNT in clone_mnt()
MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has
taken out of its namespace. It's never cleared. __detach_mounts()
unhooks a mount that carries it instead of unmounting it.
disconnect_mount() lets an unmounted child stay attached only if its
parent carries it. propagate_umount() takes it as the sign that a mount
is going to be unmounted when it decides what else can be unmounted,
where a chain of locked mounts ends and where a for reparenting an
overmount.
clone_mnt() copies the flags of the source and only masks
MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was
lazily unmounted but is kept alive by a file descriptor can still be
copied when its root is an nsfs or pidfs file because may_copy_tree()
accepts those before checking whether the source is mounted at all:
mount --bind /proc/self/ns/net /tmp/x
exec 3< /tmp/x
umount -l /tmp/x
mount --bind /proc/self/fd/3 /tmp/y
The mount on /tmp/y is attached to the caller's namespace with
MNT_UMOUNT already set and every copy of it inherits the flag again.
That causes a number of bugs:
- Unlink its mountpoint from a mount namespace where it isn't one.
__detach_mounts() takes it for a mount that was unmounted earlier,
unhooks it from its parent and drops the reference the namespace
holds on it. It stays in the namespace with one reference too few
and as its own parent, so it can't be unmounted through the file
descriptor anymore and the namespace never finds it again. When the
namespace goes away it's leaked and points to a freed struct
mnt_namespace that may_change_propagation() and anon_ns_root() read
on the next propagation change or mount_setattr() through the file
descriptor.
- Make it shared and unmount a peer. trace_transfers() follows the
flag from the peer into it and strips it from its peer group.
- Let a propagated umount reach it. gather_candidates() marks it with
T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the
mark is never cleared and every later propagated umount skips it. If
it's the parent of a locked mount handle_locked() takes it as the
cutoff and commits the locked child that should have stayed and
disconnect_mount() leaves that child attached to it, unmounted under
a mounted parent, which is what disconnect_mount() exists to
prevent. When the namespace goes away umount_tree() visits the child
a second time. And once __detach_mounts() has made it its own parent
reparent() never finds the end of the chain of unmounted parents.
A clone is a new mount that has never been unmounted. Add MNT_UMOUNT
to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when
umount_tree() reaches a mount that already has it set. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: only accept doorbell BOs as queue doorbell
amdgpu_userq_get_doorbell_index() pins any BO passed as doorbell_handle
into the doorbell domain. For a regular BO, TTM moves it with
ttm_bo_move_null() and its contents are lost. Since an importer on the
same device gets the exporter's GEM object, a client can do this to a
buffer another client shared with it.
Reject BOs that were not created in the doorbell domain.
v2: drop the error message, use a local abo variable (Christian)
(cherry picked from commit f7497bbc19db4821c62b9d97b31c9086feb2d917) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: th1520-dw-hdmi: Fix remove() callback
This driver stores struct th1520_hdmi * in platform drvdata, but
th1520_dw_hdmi_remove() was reading it back as struct dw_hdmi *
and passing it to dw_hdmi_remove(), so teardown runs on the wrong
pointer.
Retrieve struct th1520_hdmi * from platform drvdata and pass
hdmi->dw_hdmi to dw_hdmi_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix stale pinned_link entry when fb-pin performs the final unpin
xe_bo_pin_external() and xe_bo_unpin_external() maintain the bo's
pinned_link list membership in xe->pinned.late.external, based on
whether the current call is the outermost pin or the final unpin.
However, the same external bo's pin_count can also be raised and
lowered directly by __xe_pin_fb_vma()/__xe_unpin_fb_vma(), which pin
the bo as a display scanout buffer without going through
xe_bo_pin_external()/xe_bo_unpin_external() at all, and have no
notion of, or ownership over, pinned_link.
If a bo is pinned both externally (e.g. dma-buf export) and as an fb,
and the external unpin happens first, xe_bo_unpin_external() correctly
observes pin_count > 1 and leaves the bo on pinned_link. When the fb
unpin later performs the true last unpin (pin_count 1 -> 0), it never
touches pinned_link, leaving the bo linked on xe->pinned.late.external
indefinitely. Once the bo is subsequently freed, this stale list entry
points into freed memory, corrupting the list and risking a
use-after-free the next time the list is walked or spliced.
The backup object pin/unpin sites in xe_bo_notifier_prepare_pinned()/
xe_bo_notifier_unprepare_pinned() have the same bypass characteristic,
though they never add their bo to a pinned list, so are not affected
by this particular list-corruption issue.
Move the pinned_link removal into xe_bo_account_unpin(), which already
runs on every unpin path (kernel, external, framebuffer, backup
object) right before the true 1 -> 0 pin_count transition. Since
list_del_init() only operates on the node itself, this removal is
list-agnostic and safe to perform regardless of which list (external
or kernel_bo_present) the bo happens to be linked on, or which code
path is performing the final unpin. Drop the now-redundant explicit
list_del_init() calls in xe_bo_unpin_external() and xe_bo_unpin().
v2:
- New patch
v3:
- Rebased on changes to previous patch.
(cherry picked from commit ca58d36a1f93af586ee93b340c9f9fd81312cc01) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix shrinker accounting double-subtraction on nested external pins
xe_bo_pin_external() and xe_bo_unpin_external() support nested pins,
since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count
refcount rather than a boolean. However, the shrinker accounting calls
xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked
unconditionally on every pin_external()/unpin_external() call, instead
of only on the transition into and out of the pinned state.
An external BO (dma-buf) can be pinned more than once while already
pinned, for example when it has multiple attachments/importers, each
independently calling xe_bo_pin_external(). Each such nested pin
subtracts the BO's pages from the shrinker's accounting again, even
though the BO's pages were already removed from consideration by the
first pin. Symmetrically, each nested unpin adds them back again
before the BO is actually unpinned. This desynchronizes the
shrinker's page and object counts from reality, and since they are
declared as signed long but interpreted as unsigned long in
xe_shrinker_count(), the underflow can turn into an enormous
shrinkable/purgeable page count, causing the shrinker to be invoked
excessively under memory pressure.
Guard the accounting calls with the same pin-count transition checks
already used to guard the pinned_link list maintenance, so accounting
is only updated on the outermost pin and the final unpin.
While centralizing this logic into xe_bo_account_pin()/
xe_bo_account_unpin(), also close a second, related accounting gap
affecting imported dma-bufs. For an imported bo's ttm_tt, xe's
ttm_tt_populate hook (xe_ttm_tt_populate()) early-returns without
calling xe_ttm_tt_account_add(), since TTM_TT_FLAG_EXTERNAL is set
without TTM_TT_FLAG_EXTERNAL_MAPPABLE. However, TTM core's
ttm_tt_populate() wrapper unconditionally marks the tt as populated
on driver-hook success, so ttm_tt_is_populated() still reports true
for it. xe_bo_account_pin()/xe_bo_account_unpin() trusted
ttm_tt_is_populated() as a proxy for "these pages are accounted for
by the shrinker", and would subtract/add pages for such a tt that
were never added in the first place, again underflowing the
shrinker's counts. This is reachable today via xe_bo_pin_external(),
and would have become newly reachable via the fb-pin path once this
patch routes __xe_pin_fb_vma() through xe_bo_pin_account() below, so
fix it here rather than in a later patch, to avoid a commit in this
series that introduces the regression before fixing it. Skip the
accounting for imported bos, using the same EXTERNAL &&
!EXTERNAL_MAPPABLE test xe_ttm_tt_populate()/xe_ttm_tt_unpopulate()
use to decide whether to act, via a new xe_ttm_bo_is_imported()
helper (hoisted up from its only prior use site).
v2:
- Fix the critical issue caught by Sashiko AI review: the pin-count
transition check introduced here was still bypassed by the fb-pin
path (__xe_pin_fb_vma()/__xe_unpin_fb_vma()), which could leave a
stale pinned_link entry and a permanent shrinker accounting leak
when the fb-unpin performed the true last unpin. Addressed in a
separate follow-up patch in this series rather than folded in here,
since it is a distinct bug with its own Fixes: tag.
- Drop the unneeded local "last_unpin" variable in
xe_bo_unpin_external(), restoring the original inline
bo->ttm.pin_count == 1 check; it was a no-op rename not used by any
of the new accounting helpers, and was going to be deleted again by
the follow-up patch anyway.
v3:
- Exclude imported dma-bufs from the pin/unpin shrinker accounting,
fixing another underflow caught by Sashiko AI review.
- Add a short comment on the backup-object pin site noting it's
already populated/accounted at pin time, addressing (as a
false-positive clarification, no code fix needed) a separate
Medium-severity accounting-leak concern also caught by Sashiko AI
---truncated--- |
| The Mang Board plugin for WordPress is vulnerable to Arbitrary File Upload in version 2.4.4 via the mbw_file_upload function. This is due to missing file extension validation on the attacker-supplied image_path parameter, whose basename-derived file name bypasses the extension allowlist applied only to the separate file_name parameter. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. Exploitation requires the board to be configured to allow guest posts, which is the plugin's default mode; the required nonce is printed on every public board page, making it readable by any unauthenticated visitor without a WordPress login. |
| Memory corruption in Mobile in Google Chrome on on Android prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Use after free in PerformanceAPIs in Google Chrome on on Android prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Use after free in Passwords in Google Chrome on on Android prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Memory corruption in Text in Google Chrome on on Android prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Improper input validation in Omnibox in Google Chrome on on Android prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| SmileCDR HAPI FHIR does not correctly check authorization for conditional create actions. A user with CREATE but not READ permissions could submit a conditional create whose predicate matches an existing resource and receive the target resource's contents. |
| On a SmileCDR HAPI FHIR server with REST-hook subscriptions enabled, if a user is granted subscription-creation permissions, they may be able to query and read resources that they are not otherwise permitted to access. |
| SmileCDR HAPI FHIR allows an untrusted bundle body to replace a partition identity previously established by a trusted source, and does not enforce storage partition entitlement by default. An attacker authorized for one tenant can read from or write to another tenant's partition. |
| SmileCDR HAPI FHIR does not properly handle highly compressed data, allowing an unauthenticated attacker to send compressed payloads that exhaust server heap or crash certain services when decompressed. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix is_failure flag for superseded transaction cleanup
When a TF_UPDATE_TXN transaction supersedes a pending async transaction,
binder_release_entire_buffer() is called with is_failure=false. Since the
superseded transaction was never delivered, binder_apply_fd_fixups() was
never called and no fds were installed in the target process.
With is_failure=false, the BINDER_TYPE_FDA cleanup handler interprets
stale buffer contents as installed fd numbers and passes them to
binder_deferred_fd_close(), closing unrelated file descriptors.
Pass is_failure=true since the transaction was never delivered to the
target, matching the semantics of all other undelivered-transaction
cleanup paths. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix ACP MFD device leak on init failure
acp_hw_init() registers ACP child devices with mfd_add_devices() before
attaching them to the ACP power domain and initializing the hardware.
If attaching a child to the power domain fails, or if the ACP reset or
clock enable operation times out, the failure path frees only the
source cell, resource, and platform-data allocations. The child
platform devices already registered by mfd_add_devices() remain
registered and are never released.
Remove the children from the power domain and unregister the MFD
devices on failures that occur after mfd_add_devices() succeeds. Keep
mfd_add_devices() failures on the existing cleanup path since the MFD
core already rolls back partially registered children itself.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
(cherry picked from commit 63da68d6a2279ec945581c990c5a59a5ae8b5560) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix IP instance memory leak on kobject add failure
amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with
kzalloc_flex() and initializes its embedded kobject before calling
kobject_add().
If kobject_add() fails, the return value is ignored and execution
continues without dropping the initial kobject reference. The failed
kobject is not retained in the kset list, so the normal sysfs teardown
path cannot find it. As a result, ip_hw_instance_release() is never
called and the ip_hw_instance allocation is leaked.
Call kobject_put() when kobject_add() fails so the initial reference is
dropped and ip_hw_instance_release() can free the allocation. Keep the
existing best-effort sysfs behavior by continuing with the remaining IP
entries after the failed registration.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
(cherry picked from commit 5c75fbcca8af1096d8d9415b91d8ea6212c22ee1) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform device
platform_device_register_data() can fail and return an ERR_PTR, but the
return value is used without checking, leading to an invalid pointer
being stored in ddp_comp[].dev and passed to component_match_add() and
mtk_ddp_comp_init(), which could result in a kernel crash.
Add an IS_ERR() check to jump to the error handling path on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: fix firmware leak on teardown
The firmware requested in gfx_v6_0_init_microcode() is not released
when the GFX block is torn down, leaking the firmware resources.
Add gfx_v6_0_free_microcode() and call it from gfx_v6_0_sw_fini()
to release the PFP, ME, CE and RLC firmware.
(cherry picked from commit 386e81346f95ab0be5a82c5535de932e7a456924) |
